414 lines
12 KiB
C
414 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018 Samsung Electronics Co., Ltd
|
|
*
|
|
* Authors:
|
|
* Andrzej Hajda <a.hajda@samsung.com>
|
|
* Maciej Purski <m.purski@samsung.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_of.h>
|
|
#include <drm/drm_print.h>
|
|
|
|
#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end))
|
|
#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
|
|
|
|
/* PPI layer registers */
|
|
#define PPI_STARTPPI 0x0104 /* START control bit */
|
|
#define PPI_LPTXTIMECNT 0x0114 /* LPTX timing signal */
|
|
#define PPI_LANEENABLE 0x0134 /* Enables each lane */
|
|
#define PPI_TX_RX_TA 0x013C /* BTA timing parameters */
|
|
#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* Assertion timer for Lane 0 */
|
|
#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* Assertion timer for Lane 1 */
|
|
#define PPI_D2S_CLRSIPOCOUNT 0x016C /* Assertion timer for Lane 2 */
|
|
#define PPI_D3S_CLRSIPOCOUNT 0x0170 /* Assertion timer for Lane 3 */
|
|
#define PPI_START_FUNCTION 1
|
|
|
|
/* DSI layer registers */
|
|
#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX */
|
|
#define DSI_LANEENABLE 0x0210 /* Enables each lane */
|
|
#define DSI_RX_START 1
|
|
|
|
/* Video path registers */
|
|
#define VP_CTRL 0x0450 /* Video Path Control */
|
|
#define VP_CTRL_MSF(v) FLD_VAL(v, 0, 0) /* Magic square in RGB666 */
|
|
#define VP_CTRL_VTGEN(v) FLD_VAL(v, 4, 4) /* Use chip clock for timing */
|
|
#define VP_CTRL_EVTMODE(v) FLD_VAL(v, 5, 5) /* Event mode */
|
|
#define VP_CTRL_RGB888(v) FLD_VAL(v, 8, 8) /* RGB888 mode */
|
|
#define VP_CTRL_VSDELAY(v) FLD_VAL(v, 31, 20) /* VSYNC delay */
|
|
#define VP_CTRL_HSPOL BIT(17) /* Polarity of HSYNC signal */
|
|
#define VP_CTRL_DEPOL BIT(18) /* Polarity of DE signal */
|
|
#define VP_CTRL_VSPOL BIT(19) /* Polarity of VSYNC signal */
|
|
#define VP_HTIM1 0x0454 /* Horizontal Timing Control 1 */
|
|
#define VP_HTIM1_HBP(v) FLD_VAL(v, 24, 16)
|
|
#define VP_HTIM1_HSYNC(v) FLD_VAL(v, 8, 0)
|
|
#define VP_HTIM2 0x0458 /* Horizontal Timing Control 2 */
|
|
#define VP_HTIM2_HFP(v) FLD_VAL(v, 24, 16)
|
|
#define VP_HTIM2_HACT(v) FLD_VAL(v, 10, 0)
|
|
#define VP_VTIM1 0x045C /* Vertical Timing Control 1 */
|
|
#define VP_VTIM1_VBP(v) FLD_VAL(v, 23, 16)
|
|
#define VP_VTIM1_VSYNC(v) FLD_VAL(v, 7, 0)
|
|
#define VP_VTIM2 0x0460 /* Vertical Timing Control 2 */
|
|
#define VP_VTIM2_VFP(v) FLD_VAL(v, 23, 16)
|
|
#define VP_VTIM2_VACT(v) FLD_VAL(v, 10, 0)
|
|
#define VP_VFUEN 0x0464 /* Video Frame Timing Update Enable */
|
|
|
|
/* LVDS registers */
|
|
#define LV_MX0003 0x0480 /* Mux input bit 0 to 3 */
|
|
#define LV_MX0407 0x0484 /* Mux input bit 4 to 7 */
|
|
#define LV_MX0811 0x0488 /* Mux input bit 8 to 11 */
|
|
#define LV_MX1215 0x048C /* Mux input bit 12 to 15 */
|
|
#define LV_MX1619 0x0490 /* Mux input bit 16 to 19 */
|
|
#define LV_MX2023 0x0494 /* Mux input bit 20 to 23 */
|
|
#define LV_MX2427 0x0498 /* Mux input bit 24 to 27 */
|
|
#define LV_MX(b0, b1, b2, b3) (FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \
|
|
FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24))
|
|
|
|
/* Input bit numbers used in mux registers */
|
|
enum {
|
|
LVI_R0,
|
|
LVI_R1,
|
|
LVI_R2,
|
|
LVI_R3,
|
|
LVI_R4,
|
|
LVI_R5,
|
|
LVI_R6,
|
|
LVI_R7,
|
|
LVI_G0,
|
|
LVI_G1,
|
|
LVI_G2,
|
|
LVI_G3,
|
|
LVI_G4,
|
|
LVI_G5,
|
|
LVI_G6,
|
|
LVI_G7,
|
|
LVI_B0,
|
|
LVI_B1,
|
|
LVI_B2,
|
|
LVI_B3,
|
|
LVI_B4,
|
|
LVI_B5,
|
|
LVI_B6,
|
|
LVI_B7,
|
|
LVI_HS,
|
|
LVI_VS,
|
|
LVI_DE,
|
|
LVI_L0
|
|
};
|
|
|
|
#define LV_CFG 0x049C /* LVDS Configuration */
|
|
#define LV_PHY0 0x04A0 /* LVDS PHY 0 */
|
|
#define LV_PHY0_RST(v) FLD_VAL(v, 22, 22) /* PHY reset */
|
|
#define LV_PHY0_IS(v) FLD_VAL(v, 15, 14)
|
|
#define LV_PHY0_ND(v) FLD_VAL(v, 4, 0) /* Frequency range select */
|
|
#define LV_PHY0_PRBS_ON(v) FLD_VAL(v, 20, 16) /* Clock/Data Flag pins */
|
|
|
|
/* System registers */
|
|
#define SYS_RST 0x0504 /* System Reset */
|
|
#define SYS_ID 0x0580 /* System ID */
|
|
|
|
#define SYS_RST_I2CS BIT(0) /* Reset I2C-Slave controller */
|
|
#define SYS_RST_I2CM BIT(1) /* Reset I2C-Master controller */
|
|
#define SYS_RST_LCD BIT(2) /* Reset LCD controller */
|
|
#define SYS_RST_BM BIT(3) /* Reset Bus Management controller */
|
|
#define SYS_RST_DSIRX BIT(4) /* Reset DSI-RX and App controller */
|
|
#define SYS_RST_REG BIT(5) /* Reset Register module */
|
|
|
|
#define LPX_PERIOD 2
|
|
#define TTA_SURE 3
|
|
#define TTA_GET 0x20000
|
|
|
|
/* Lane enable PPI and DSI register bits */
|
|
#define LANEENABLE_CLEN BIT(0)
|
|
#define LANEENABLE_L0EN BIT(1)
|
|
#define LANEENABLE_L1EN BIT(2)
|
|
#define LANEENABLE_L2EN BIT(3)
|
|
#define LANEENABLE_L3EN BIT(4)
|
|
|
|
/* LVCFG fields */
|
|
#define LV_CFG_LVEN BIT(0)
|
|
#define LV_CFG_LVDLINK BIT(1)
|
|
#define LV_CFG_CLKPOL1 BIT(2)
|
|
#define LV_CFG_CLKPOL2 BIT(3)
|
|
|
|
static const char * const tc358764_supplies[] = {
|
|
"vddc", "vddio", "vddlvds"
|
|
};
|
|
|
|
struct tc358764 {
|
|
struct device *dev;
|
|
struct drm_bridge bridge;
|
|
struct drm_bridge *next_bridge;
|
|
struct regulator_bulk_data supplies[ARRAY_SIZE(tc358764_supplies)];
|
|
struct gpio_desc *gpio_reset;
|
|
int error;
|
|
};
|
|
|
|
static int tc358764_clear_error(struct tc358764 *ctx)
|
|
{
|
|
int ret = ctx->error;
|
|
|
|
ctx->error = 0;
|
|
return ret;
|
|
}
|
|
|
|
static void tc358764_read(struct tc358764 *ctx, u16 addr, u32 *val)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
ssize_t ret;
|
|
|
|
if (ctx->error)
|
|
return;
|
|
|
|
cpu_to_le16s(&addr);
|
|
ret = mipi_dsi_generic_read(dsi, &addr, sizeof(addr), val, sizeof(*val));
|
|
if (ret >= 0)
|
|
le32_to_cpus(val);
|
|
|
|
dev_dbg(ctx->dev, "read: %d, addr: %d\n", addr, *val);
|
|
}
|
|
|
|
static void tc358764_write(struct tc358764 *ctx, u16 addr, u32 val)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
ssize_t ret;
|
|
u8 data[6];
|
|
|
|
if (ctx->error)
|
|
return;
|
|
|
|
data[0] = addr;
|
|
data[1] = addr >> 8;
|
|
data[2] = val;
|
|
data[3] = val >> 8;
|
|
data[4] = val >> 16;
|
|
data[5] = val >> 24;
|
|
|
|
ret = mipi_dsi_generic_write(dsi, data, sizeof(data));
|
|
if (ret < 0)
|
|
ctx->error = ret;
|
|
}
|
|
|
|
static inline struct tc358764 *bridge_to_tc358764(struct drm_bridge *bridge)
|
|
{
|
|
return container_of(bridge, struct tc358764, bridge);
|
|
}
|
|
|
|
static int tc358764_init(struct tc358764 *ctx)
|
|
{
|
|
u32 v = 0;
|
|
|
|
tc358764_read(ctx, SYS_ID, &v);
|
|
if (ctx->error)
|
|
return tc358764_clear_error(ctx);
|
|
dev_info(ctx->dev, "ID: %#x\n", v);
|
|
|
|
/* configure PPI counters */
|
|
tc358764_write(ctx, PPI_TX_RX_TA, TTA_GET | TTA_SURE);
|
|
tc358764_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD);
|
|
tc358764_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5);
|
|
tc358764_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5);
|
|
tc358764_write(ctx, PPI_D2S_CLRSIPOCOUNT, 5);
|
|
tc358764_write(ctx, PPI_D3S_CLRSIPOCOUNT, 5);
|
|
|
|
/* enable four data lanes and clock lane */
|
|
tc358764_write(ctx, PPI_LANEENABLE, LANEENABLE_L3EN | LANEENABLE_L2EN |
|
|
LANEENABLE_L1EN | LANEENABLE_L0EN | LANEENABLE_CLEN);
|
|
tc358764_write(ctx, DSI_LANEENABLE, LANEENABLE_L3EN | LANEENABLE_L2EN |
|
|
LANEENABLE_L1EN | LANEENABLE_L0EN | LANEENABLE_CLEN);
|
|
|
|
/* start */
|
|
tc358764_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION);
|
|
tc358764_write(ctx, DSI_STARTDSI, DSI_RX_START);
|
|
|
|
/* configure video path */
|
|
tc358764_write(ctx, VP_CTRL, VP_CTRL_VSDELAY(15) | VP_CTRL_RGB888(1) |
|
|
VP_CTRL_EVTMODE(1) | VP_CTRL_HSPOL | VP_CTRL_VSPOL);
|
|
|
|
/* reset PHY */
|
|
tc358764_write(ctx, LV_PHY0, LV_PHY0_RST(1) |
|
|
LV_PHY0_PRBS_ON(4) | LV_PHY0_IS(2) | LV_PHY0_ND(6));
|
|
tc358764_write(ctx, LV_PHY0, LV_PHY0_PRBS_ON(4) | LV_PHY0_IS(2) |
|
|
LV_PHY0_ND(6));
|
|
|
|
/* reset bridge */
|
|
tc358764_write(ctx, SYS_RST, SYS_RST_LCD);
|
|
|
|
/* set bit order */
|
|
tc358764_write(ctx, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3));
|
|
tc358764_write(ctx, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0));
|
|
tc358764_write(ctx, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7));
|
|
tc358764_write(ctx, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0));
|
|
tc358764_write(ctx, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2));
|
|
tc358764_write(ctx, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
|
|
tc358764_write(ctx, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6));
|
|
tc358764_write(ctx, LV_CFG, LV_CFG_CLKPOL2 | LV_CFG_CLKPOL1 |
|
|
LV_CFG_LVEN);
|
|
|
|
return tc358764_clear_error(ctx);
|
|
}
|
|
|
|
static void tc358764_reset(struct tc358764 *ctx)
|
|
{
|
|
gpiod_set_value(ctx->gpio_reset, 1);
|
|
usleep_range(1000, 2000);
|
|
gpiod_set_value(ctx->gpio_reset, 0);
|
|
usleep_range(1000, 2000);
|
|
}
|
|
|
|
static void tc358764_post_disable(struct drm_bridge *bridge)
|
|
{
|
|
struct tc358764 *ctx = bridge_to_tc358764(bridge);
|
|
int ret;
|
|
|
|
tc358764_reset(ctx);
|
|
usleep_range(10000, 15000);
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
if (ret < 0)
|
|
dev_err(ctx->dev, "error disabling regulators (%d)\n", ret);
|
|
}
|
|
|
|
static void tc358764_pre_enable(struct drm_bridge *bridge)
|
|
{
|
|
struct tc358764 *ctx = bridge_to_tc358764(bridge);
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
if (ret < 0)
|
|
dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
|
|
usleep_range(10000, 15000);
|
|
tc358764_reset(ctx);
|
|
ret = tc358764_init(ctx);
|
|
if (ret < 0)
|
|
dev_err(ctx->dev, "error initializing bridge (%d)\n", ret);
|
|
}
|
|
|
|
static int tc358764_attach(struct drm_bridge *bridge,
|
|
enum drm_bridge_attach_flags flags)
|
|
{
|
|
struct tc358764 *ctx = bridge_to_tc358764(bridge);
|
|
|
|
return drm_bridge_attach(bridge->encoder, ctx->next_bridge, bridge, flags);
|
|
}
|
|
|
|
static const struct drm_bridge_funcs tc358764_bridge_funcs = {
|
|
.post_disable = tc358764_post_disable,
|
|
.pre_enable = tc358764_pre_enable,
|
|
.attach = tc358764_attach,
|
|
};
|
|
|
|
static int tc358764_parse_dt(struct tc358764 *ctx)
|
|
{
|
|
struct device *dev = ctx->dev;
|
|
|
|
ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->gpio_reset)) {
|
|
dev_err(dev, "no reset GPIO pin provided\n");
|
|
return PTR_ERR(ctx->gpio_reset);
|
|
}
|
|
|
|
ctx->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
|
|
if (IS_ERR(ctx->next_bridge))
|
|
return PTR_ERR(ctx->next_bridge);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tc358764_configure_regulators(struct tc358764 *ctx)
|
|
{
|
|
int i, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ctx->supplies); ++i)
|
|
ctx->supplies[i].supply = tc358764_supplies[i];
|
|
|
|
ret = devm_regulator_bulk_get(ctx->dev, ARRAY_SIZE(ctx->supplies),
|
|
ctx->supplies);
|
|
if (ret < 0)
|
|
dev_err(ctx->dev, "failed to get regulators: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tc358764_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct tc358764 *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(struct tc358764), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
ctx->dev = dev;
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST
|
|
| MIPI_DSI_MODE_VIDEO_AUTO_VERT | MIPI_DSI_MODE_LPM;
|
|
|
|
ret = tc358764_parse_dt(ctx);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = tc358764_configure_regulators(ctx);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ctx->bridge.funcs = &tc358764_bridge_funcs;
|
|
ctx->bridge.of_node = dev->of_node;
|
|
ctx->bridge.pre_enable_prev_first = true;
|
|
|
|
drm_bridge_add(&ctx->bridge);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
drm_bridge_remove(&ctx->bridge);
|
|
dev_err(dev, "failed to attach dsi\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void tc358764_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct tc358764 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
|
|
mipi_dsi_detach(dsi);
|
|
drm_bridge_remove(&ctx->bridge);
|
|
}
|
|
|
|
static const struct of_device_id tc358764_of_match[] = {
|
|
{ .compatible = "toshiba,tc358764" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tc358764_of_match);
|
|
|
|
static struct mipi_dsi_driver tc358764_driver = {
|
|
.probe = tc358764_probe,
|
|
.remove = tc358764_remove,
|
|
.driver = {
|
|
.name = "tc358764",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = tc358764_of_match,
|
|
},
|
|
};
|
|
module_mipi_dsi_driver(tc358764_driver);
|
|
|
|
MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
|
|
MODULE_AUTHOR("Maciej Purski <m.purski@samsung.com>");
|
|
MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358764 DSI/LVDS Bridge");
|
|
MODULE_LICENSE("GPL v2");
|