linux-zen-server/drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h

100 lines
3.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (c) 2016 Linaro Limited.
* Copyright (c) 2014-2016 HiSilicon Limited.
*/
#ifndef __DW_DSI_REG_H__
#define __DW_DSI_REG_H__
#define MASK(x) (BIT(x) - 1)
/*
* regs
*/
#define PWR_UP 0x04 /* Core power-up */
#define RESET 0
#define POWERUP BIT(0)
#define PHY_IF_CFG 0xA4 /* D-PHY interface configuration */
#define CLKMGR_CFG 0x08 /* the internal clock dividers */
#define PHY_RSTZ 0xA0 /* D-PHY reset control */
#define PHY_ENABLECLK BIT(2)
#define PHY_UNRSTZ BIT(1)
#define PHY_UNSHUTDOWNZ BIT(0)
#define PHY_TST_CTRL0 0xB4 /* D-PHY test interface control 0 */
#define PHY_TST_CTRL1 0xB8 /* D-PHY test interface control 1 */
#define CLK_TLPX 0x10
#define CLK_THS_PREPARE 0x11
#define CLK_THS_ZERO 0x12
#define CLK_THS_TRAIL 0x13
#define CLK_TWAKEUP 0x14
#define DATA_TLPX(x) (0x20 + ((x) << 4))
#define DATA_THS_PREPARE(x) (0x21 + ((x) << 4))
#define DATA_THS_ZERO(x) (0x22 + ((x) << 4))
#define DATA_THS_TRAIL(x) (0x23 + ((x) << 4))
#define DATA_TTA_GO(x) (0x24 + ((x) << 4))
#define DATA_TTA_GET(x) (0x25 + ((x) << 4))
#define DATA_TWAKEUP(x) (0x26 + ((x) << 4))
#define PHY_CFG_I 0x60
#define PHY_CFG_PLL_I 0x63
#define PHY_CFG_PLL_II 0x64
#define PHY_CFG_PLL_III 0x65
#define PHY_CFG_PLL_IV 0x66
#define PHY_CFG_PLL_V 0x67
#define DPI_COLOR_CODING 0x10 /* DPI color coding */
#define DPI_CFG_POL 0x14 /* DPI polarity configuration */
#define VID_HSA_TIME 0x48 /* Horizontal Sync Active time */
#define VID_HBP_TIME 0x4C /* Horizontal Back Porch time */
#define VID_HLINE_TIME 0x50 /* Line time */
#define VID_VSA_LINES 0x54 /* Vertical Sync Active period */
#define VID_VBP_LINES 0x58 /* Vertical Back Porch period */
#define VID_VFP_LINES 0x5C /* Vertical Front Porch period */
#define VID_VACTIVE_LINES 0x60 /* Vertical resolution */
#define VID_PKT_SIZE 0x3C /* Video packet size */
#define VID_MODE_CFG 0x38 /* Video mode configuration */
#define PHY_TMR_CFG 0x9C /* Data lanes timing configuration */
#define BTA_TO_CNT 0x8C /* Response timeout definition */
#define PHY_TMR_LPCLK_CFG 0x98 /* clock lane timing configuration */
#define CLK_DATA_TMR_CFG 0xCC
#define LPCLK_CTRL 0x94 /* Low-power in clock lane */
#define PHY_TXREQUESTCLKHS BIT(0)
#define MODE_CFG 0x34 /* Video or Command mode selection */
#define PHY_STATUS 0xB0 /* D-PHY PPI status interface */
#define PHY_STOP_WAIT_TIME 0x30
/*
* regs relevant enum
*/
enum dpi_color_coding {
DSI_24BITS_1 = 5,
};
enum dsi_video_mode_type {
DSI_NON_BURST_SYNC_PULSES = 0,
DSI_NON_BURST_SYNC_EVENTS,
DSI_BURST_SYNC_PULSES_1,
DSI_BURST_SYNC_PULSES_2
};
enum dsi_work_mode {
DSI_VIDEO_MODE = 0,
DSI_COMMAND_MODE
};
/*
* Register Write/Read Helper functions
*/
static inline void dw_update_bits(void __iomem *addr, u32 bit_start,
u32 mask, u32 val)
{
u32 tmp, orig;
orig = readl(addr);
tmp = orig & ~(mask << bit_start);
tmp |= (val & mask) << bit_start;
writel(tmp, addr);
}
#endif /* __DW_DRM_DSI_H__ */