284 lines
6.7 KiB
C
284 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2022 Joel Selvaraj <jo@jsfamily.in>
|
|
* Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
|
|
* Copyright (c) 2013, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
static const char * const regulator_names[] = {
|
|
"vddio",
|
|
"vddpos",
|
|
"vddneg",
|
|
};
|
|
|
|
static const unsigned long regulator_enable_loads[] = {
|
|
62000,
|
|
100000,
|
|
100000
|
|
};
|
|
|
|
struct ebbg_ft8719 {
|
|
struct drm_panel panel;
|
|
struct mipi_dsi_device *dsi;
|
|
|
|
struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
|
|
|
|
struct gpio_desc *reset_gpio;
|
|
};
|
|
|
|
static inline
|
|
struct ebbg_ft8719 *to_ebbg_ft8719(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct ebbg_ft8719, panel);
|
|
}
|
|
|
|
static void ebbg_ft8719_reset(struct ebbg_ft8719 *ctx)
|
|
{
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
usleep_range(4000, 5000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
usleep_range(1000, 2000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
usleep_range(15000, 16000);
|
|
}
|
|
|
|
static int ebbg_ft8719_on(struct ebbg_ft8719 *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = ctx->dsi;
|
|
struct device *dev = &dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display brightness: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24);
|
|
mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(90);
|
|
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display on: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ebbg_ft8719_off(struct ebbg_ft8719 *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = ctx->dsi;
|
|
struct device *dev = &dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display off: %d\n", ret);
|
|
return ret;
|
|
}
|
|
usleep_range(10000, 11000);
|
|
|
|
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(90);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ebbg_ft8719_prepare(struct drm_panel *panel)
|
|
{
|
|
struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
|
|
struct device *dev = &ctx->dsi->dev;
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ebbg_ft8719_reset(ctx);
|
|
|
|
ret = ebbg_ft8719_on(ctx);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to initialize panel: %d\n", ret);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ebbg_ft8719_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct ebbg_ft8719 *ctx = to_ebbg_ft8719(panel);
|
|
struct device *dev = &ctx->dsi->dev;
|
|
int ret;
|
|
|
|
ret = ebbg_ft8719_off(ctx);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
|
|
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
if (ret)
|
|
dev_err(panel->dev, "Failed to disable regulators: %d\n", ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_display_mode ebbg_ft8719_mode = {
|
|
.clock = (1080 + 28 + 4 + 16) * (2246 + 120 + 4 + 12) * 60 / 1000,
|
|
.hdisplay = 1080,
|
|
.hsync_start = 1080 + 28,
|
|
.hsync_end = 1080 + 28 + 4,
|
|
.htotal = 1080 + 28 + 4 + 16,
|
|
.vdisplay = 2246,
|
|
.vsync_start = 2246 + 120,
|
|
.vsync_end = 2246 + 120 + 4,
|
|
.vtotal = 2246 + 120 + 4 + 12,
|
|
.width_mm = 68,
|
|
.height_mm = 141,
|
|
};
|
|
|
|
static int ebbg_ft8719_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, &ebbg_ft8719_mode);
|
|
if (!mode)
|
|
return -ENOMEM;
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
connector->display_info.width_mm = mode->width_mm;
|
|
connector->display_info.height_mm = mode->height_mm;
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs ebbg_ft8719_panel_funcs = {
|
|
.prepare = ebbg_ft8719_prepare,
|
|
.unprepare = ebbg_ft8719_unprepare,
|
|
.get_modes = ebbg_ft8719_get_modes,
|
|
};
|
|
|
|
static int ebbg_ft8719_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct ebbg_ft8719 *ctx;
|
|
int i, ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++)
|
|
ctx->supplies[i].supply = regulator_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
|
|
ctx->supplies);
|
|
if (ret < 0)
|
|
return dev_err_probe(dev, ret, "Failed to get regulators\n");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
|
|
ret = regulator_set_load(ctx->supplies[i].consumer,
|
|
regulator_enable_loads[i]);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret,
|
|
"Failed to set regulator load\n");
|
|
}
|
|
|
|
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(ctx->reset_gpio))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
|
|
"Failed to get reset-gpios\n");
|
|
|
|
ctx->dsi = dsi;
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
|
|
MIPI_DSI_CLOCK_NON_CONTINUOUS;
|
|
|
|
drm_panel_init(&ctx->panel, dev, &ebbg_ft8719_panel_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
ret = drm_panel_of_backlight(&ctx->panel);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to get backlight\n");
|
|
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ebbg_ft8719_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct ebbg_ft8719 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
ret = mipi_dsi_detach(dsi);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
|
|
|
|
drm_panel_remove(&ctx->panel);
|
|
}
|
|
|
|
static const struct of_device_id ebbg_ft8719_of_match[] = {
|
|
{ .compatible = "ebbg,ft8719" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ebbg_ft8719_of_match);
|
|
|
|
static struct mipi_dsi_driver ebbg_ft8719_driver = {
|
|
.probe = ebbg_ft8719_probe,
|
|
.remove = ebbg_ft8719_remove,
|
|
.driver = {
|
|
.name = "panel-ebbg-ft8719",
|
|
.of_match_table = ebbg_ft8719_of_match,
|
|
},
|
|
};
|
|
module_mipi_dsi_driver(ebbg_ft8719_driver);
|
|
|
|
MODULE_AUTHOR("Joel Selvaraj <jo@jsfamily.in>");
|
|
MODULE_DESCRIPTION("DRM driver for EBBG FT8719 video dsi panel");
|
|
MODULE_LICENSE("GPL v2");
|