524 lines
11 KiB
C
524 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2016 InforceComputing
|
|
* Author: Vinay Simha BN <simhavcs@gmail.com>
|
|
*
|
|
* Copyright (C) 2016 Linaro Ltd
|
|
* Author: Sumit Semwal <sumit.semwal@linaro.org>
|
|
*
|
|
* From internet archives, the panel for Nexus 7 2nd Gen, 2013 model is a
|
|
* JDI model LT070ME05000, and its data sheet is at:
|
|
* http://panelone.net/en/7-0-inch/JDI_LT070ME05000_7.0_inch-datasheet
|
|
*/
|
|
|
|
#include <linux/backlight.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
static const char * const regulator_names[] = {
|
|
"vddp",
|
|
"iovcc"
|
|
};
|
|
|
|
struct jdi_panel {
|
|
struct drm_panel base;
|
|
struct mipi_dsi_device *dsi;
|
|
|
|
struct regulator_bulk_data supplies[ARRAY_SIZE(regulator_names)];
|
|
|
|
struct gpio_desc *enable_gpio;
|
|
struct gpio_desc *reset_gpio;
|
|
struct gpio_desc *dcdc_en_gpio;
|
|
struct backlight_device *backlight;
|
|
|
|
bool prepared;
|
|
bool enabled;
|
|
|
|
const struct drm_display_mode *mode;
|
|
};
|
|
|
|
static inline struct jdi_panel *to_jdi_panel(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct jdi_panel, base);
|
|
}
|
|
|
|
static int jdi_panel_init(struct jdi_panel *jdi)
|
|
{
|
|
struct mipi_dsi_device *dsi = jdi->dsi;
|
|
struct device *dev = &jdi->dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_soft_reset(dsi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usleep_range(10000, 20000);
|
|
|
|
ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT << 4);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set pixel format: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_set_column_address(dsi, 0, jdi->mode->hdisplay - 1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set column address: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_set_page_address(dsi, 0, jdi->mode->vdisplay - 1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set page address: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* BIT(5) BCTRL = 1 Backlight Control Block On, Brightness registers
|
|
* are active
|
|
* BIT(3) BL = 1 Backlight Control On
|
|
* BIT(2) DD = 0 Display Dimming is Off
|
|
*/
|
|
ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
|
|
(u8[]){ 0x24 }, 1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to write control display: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* CABC off */
|
|
ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_POWER_SAVE,
|
|
(u8[]){ 0x00 }, 1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set cabc off: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set exit sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
msleep(120);
|
|
|
|
ret = mipi_dsi_generic_write(dsi, (u8[]){0xB0, 0x00}, 2);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set mcap: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
mdelay(10);
|
|
|
|
/* Interface setting, video mode */
|
|
ret = mipi_dsi_generic_write(dsi, (u8[])
|
|
{0xB3, 0x26, 0x08, 0x00, 0x20, 0x00}, 6);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set display interface setting: %d\n"
|
|
, ret);
|
|
return ret;
|
|
}
|
|
|
|
mdelay(20);
|
|
|
|
ret = mipi_dsi_generic_write(dsi, (u8[]){0xB0, 0x03}, 2);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set default values for mcap: %d\n"
|
|
, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jdi_panel_on(struct jdi_panel *jdi)
|
|
{
|
|
struct mipi_dsi_device *dsi = jdi->dsi;
|
|
struct device *dev = &jdi->dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret < 0)
|
|
dev_err(dev, "failed to set display on: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void jdi_panel_off(struct jdi_panel *jdi)
|
|
{
|
|
struct mipi_dsi_device *dsi = jdi->dsi;
|
|
struct device *dev = &jdi->dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
|
if (ret < 0)
|
|
dev_err(dev, "failed to set display off: %d\n", ret);
|
|
|
|
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
|
|
if (ret < 0)
|
|
dev_err(dev, "failed to enter sleep mode: %d\n", ret);
|
|
|
|
msleep(100);
|
|
}
|
|
|
|
static int jdi_panel_disable(struct drm_panel *panel)
|
|
{
|
|
struct jdi_panel *jdi = to_jdi_panel(panel);
|
|
|
|
if (!jdi->enabled)
|
|
return 0;
|
|
|
|
backlight_disable(jdi->backlight);
|
|
|
|
jdi->enabled = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jdi_panel_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct jdi_panel *jdi = to_jdi_panel(panel);
|
|
struct device *dev = &jdi->dsi->dev;
|
|
int ret;
|
|
|
|
if (!jdi->prepared)
|
|
return 0;
|
|
|
|
jdi_panel_off(jdi);
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(jdi->supplies), jdi->supplies);
|
|
if (ret < 0)
|
|
dev_err(dev, "regulator disable failed, %d\n", ret);
|
|
|
|
gpiod_set_value(jdi->enable_gpio, 0);
|
|
|
|
gpiod_set_value(jdi->reset_gpio, 1);
|
|
|
|
gpiod_set_value(jdi->dcdc_en_gpio, 0);
|
|
|
|
jdi->prepared = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jdi_panel_prepare(struct drm_panel *panel)
|
|
{
|
|
struct jdi_panel *jdi = to_jdi_panel(panel);
|
|
struct device *dev = &jdi->dsi->dev;
|
|
int ret;
|
|
|
|
if (jdi->prepared)
|
|
return 0;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(jdi->supplies), jdi->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "regulator enable failed, %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
msleep(20);
|
|
|
|
gpiod_set_value(jdi->dcdc_en_gpio, 1);
|
|
usleep_range(10, 20);
|
|
|
|
gpiod_set_value(jdi->reset_gpio, 0);
|
|
usleep_range(10, 20);
|
|
|
|
gpiod_set_value(jdi->enable_gpio, 1);
|
|
usleep_range(10, 20);
|
|
|
|
ret = jdi_panel_init(jdi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to init panel: %d\n", ret);
|
|
goto poweroff;
|
|
}
|
|
|
|
ret = jdi_panel_on(jdi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to set panel on: %d\n", ret);
|
|
goto poweroff;
|
|
}
|
|
|
|
jdi->prepared = true;
|
|
|
|
return 0;
|
|
|
|
poweroff:
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(jdi->supplies), jdi->supplies);
|
|
if (ret < 0)
|
|
dev_err(dev, "regulator disable failed, %d\n", ret);
|
|
|
|
gpiod_set_value(jdi->enable_gpio, 0);
|
|
|
|
gpiod_set_value(jdi->reset_gpio, 1);
|
|
|
|
gpiod_set_value(jdi->dcdc_en_gpio, 0);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int jdi_panel_enable(struct drm_panel *panel)
|
|
{
|
|
struct jdi_panel *jdi = to_jdi_panel(panel);
|
|
|
|
if (jdi->enabled)
|
|
return 0;
|
|
|
|
backlight_enable(jdi->backlight);
|
|
|
|
jdi->enabled = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_display_mode default_mode = {
|
|
.clock = 155493,
|
|
.hdisplay = 1200,
|
|
.hsync_start = 1200 + 48,
|
|
.hsync_end = 1200 + 48 + 32,
|
|
.htotal = 1200 + 48 + 32 + 60,
|
|
.vdisplay = 1920,
|
|
.vsync_start = 1920 + 3,
|
|
.vsync_end = 1920 + 3 + 5,
|
|
.vtotal = 1920 + 3 + 5 + 6,
|
|
.flags = 0,
|
|
};
|
|
|
|
static int jdi_panel_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
struct jdi_panel *jdi = to_jdi_panel(panel);
|
|
struct device *dev = &jdi->dsi->dev;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, &default_mode);
|
|
if (!mode) {
|
|
dev_err(dev, "failed to add mode %ux%ux@%u\n",
|
|
default_mode.hdisplay, default_mode.vdisplay,
|
|
drm_mode_vrefresh(&default_mode));
|
|
return -ENOMEM;
|
|
}
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
connector->display_info.width_mm = 95;
|
|
connector->display_info.height_mm = 151;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int dsi_dcs_bl_get_brightness(struct backlight_device *bl)
|
|
{
|
|
struct mipi_dsi_device *dsi = bl_get_data(bl);
|
|
int ret;
|
|
u16 brightness = bl->props.brightness;
|
|
|
|
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_get_display_brightness(dsi, &brightness);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
return brightness & 0xff;
|
|
}
|
|
|
|
static int dsi_dcs_bl_update_status(struct backlight_device *bl)
|
|
{
|
|
struct mipi_dsi_device *dsi = bl_get_data(bl);
|
|
int ret;
|
|
|
|
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_set_display_brightness(dsi, bl->props.brightness);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct backlight_ops dsi_bl_ops = {
|
|
.update_status = dsi_dcs_bl_update_status,
|
|
.get_brightness = dsi_dcs_bl_get_brightness,
|
|
};
|
|
|
|
static struct backlight_device *
|
|
drm_panel_create_dsi_backlight(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct backlight_properties props;
|
|
|
|
memset(&props, 0, sizeof(props));
|
|
props.type = BACKLIGHT_RAW;
|
|
props.brightness = 255;
|
|
props.max_brightness = 255;
|
|
|
|
return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
|
|
&dsi_bl_ops, &props);
|
|
}
|
|
|
|
static const struct drm_panel_funcs jdi_panel_funcs = {
|
|
.disable = jdi_panel_disable,
|
|
.unprepare = jdi_panel_unprepare,
|
|
.prepare = jdi_panel_prepare,
|
|
.enable = jdi_panel_enable,
|
|
.get_modes = jdi_panel_get_modes,
|
|
};
|
|
|
|
static const struct of_device_id jdi_of_match[] = {
|
|
{ .compatible = "jdi,lt070me05000", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jdi_of_match);
|
|
|
|
static int jdi_panel_add(struct jdi_panel *jdi)
|
|
{
|
|
struct device *dev = &jdi->dsi->dev;
|
|
int ret;
|
|
unsigned int i;
|
|
|
|
jdi->mode = &default_mode;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(jdi->supplies); i++)
|
|
jdi->supplies[i].supply = regulator_names[i];
|
|
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(jdi->supplies),
|
|
jdi->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to init regulator, ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
jdi->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
|
|
if (IS_ERR(jdi->enable_gpio)) {
|
|
ret = PTR_ERR(jdi->enable_gpio);
|
|
dev_err(dev, "cannot get enable-gpio %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
jdi->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(jdi->reset_gpio)) {
|
|
ret = PTR_ERR(jdi->reset_gpio);
|
|
dev_err(dev, "cannot get reset-gpios %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
jdi->dcdc_en_gpio = devm_gpiod_get(dev, "dcdc-en", GPIOD_OUT_LOW);
|
|
if (IS_ERR(jdi->dcdc_en_gpio)) {
|
|
ret = PTR_ERR(jdi->dcdc_en_gpio);
|
|
dev_err(dev, "cannot get dcdc-en-gpio %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
jdi->backlight = drm_panel_create_dsi_backlight(jdi->dsi);
|
|
if (IS_ERR(jdi->backlight)) {
|
|
ret = PTR_ERR(jdi->backlight);
|
|
dev_err(dev, "failed to register backlight %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
drm_panel_init(&jdi->base, &jdi->dsi->dev, &jdi_panel_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
drm_panel_add(&jdi->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void jdi_panel_del(struct jdi_panel *jdi)
|
|
{
|
|
if (jdi->base.dev)
|
|
drm_panel_remove(&jdi->base);
|
|
}
|
|
|
|
static int jdi_panel_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct jdi_panel *jdi;
|
|
int ret;
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_MODE_VIDEO |
|
|
MIPI_DSI_CLOCK_NON_CONTINUOUS;
|
|
|
|
jdi = devm_kzalloc(&dsi->dev, sizeof(*jdi), GFP_KERNEL);
|
|
if (!jdi)
|
|
return -ENOMEM;
|
|
|
|
mipi_dsi_set_drvdata(dsi, jdi);
|
|
|
|
jdi->dsi = dsi;
|
|
|
|
ret = jdi_panel_add(jdi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
jdi_panel_del(jdi);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void jdi_panel_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
ret = jdi_panel_disable(&jdi->base);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
|
|
|
|
ret = mipi_dsi_detach(dsi);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "failed to detach from DSI host: %d\n",
|
|
ret);
|
|
|
|
jdi_panel_del(jdi);
|
|
}
|
|
|
|
static void jdi_panel_shutdown(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct jdi_panel *jdi = mipi_dsi_get_drvdata(dsi);
|
|
|
|
jdi_panel_disable(&jdi->base);
|
|
}
|
|
|
|
static struct mipi_dsi_driver jdi_panel_driver = {
|
|
.driver = {
|
|
.name = "panel-jdi-lt070me05000",
|
|
.of_match_table = jdi_of_match,
|
|
},
|
|
.probe = jdi_panel_probe,
|
|
.remove = jdi_panel_remove,
|
|
.shutdown = jdi_panel_shutdown,
|
|
};
|
|
module_mipi_dsi_driver(jdi_panel_driver);
|
|
|
|
MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
|
|
MODULE_AUTHOR("Vinay Simha BN <simhavcs@gmail.com>");
|
|
MODULE_DESCRIPTION("JDI LT070ME05000 WUXGA");
|
|
MODULE_LICENSE("GPL v2");
|