280 lines
7.2 KiB
C
280 lines
7.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
// Copyright (C) 2019, Michael Srba
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
struct s6e88a0_ams452ef01 {
|
|
struct drm_panel panel;
|
|
struct mipi_dsi_device *dsi;
|
|
struct regulator_bulk_data supplies[2];
|
|
struct gpio_desc *reset_gpio;
|
|
|
|
bool prepared;
|
|
};
|
|
|
|
static inline struct
|
|
s6e88a0_ams452ef01 *to_s6e88a0_ams452ef01(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct s6e88a0_ams452ef01, panel);
|
|
}
|
|
|
|
static void s6e88a0_ams452ef01_reset(struct s6e88a0_ams452ef01 *ctx)
|
|
{
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
usleep_range(5000, 6000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
usleep_range(1000, 2000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
usleep_range(10000, 11000);
|
|
}
|
|
|
|
static int s6e88a0_ams452ef01_on(struct s6e88a0_ams452ef01 *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = ctx->dsi;
|
|
struct device *dev = &dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a); // enable LEVEL2 commands
|
|
mipi_dsi_dcs_write_seq(dsi, 0xcc, 0x4c); // set Pixel Clock Divider polarity
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(120);
|
|
|
|
// set default brightness/gama
|
|
mipi_dsi_dcs_write_seq(dsi, 0xca,
|
|
0x01, 0x00, 0x01, 0x00, 0x01, 0x00, // V255 RR,GG,BB
|
|
0x80, 0x80, 0x80, // V203 R,G,B
|
|
0x80, 0x80, 0x80, // V151 R,G,B
|
|
0x80, 0x80, 0x80, // V87 R,G,B
|
|
0x80, 0x80, 0x80, // V51 R,G,B
|
|
0x80, 0x80, 0x80, // V35 R,G,B
|
|
0x80, 0x80, 0x80, // V23 R,G,B
|
|
0x80, 0x80, 0x80, // V11 R,G,B
|
|
0x6b, 0x68, 0x71, // V3 R,G,B
|
|
0x00, 0x00, 0x00); // V1 R,G,B
|
|
// set default Amoled Off Ratio
|
|
mipi_dsi_dcs_write_seq(dsi, 0xb2, 0x40, 0x0a, 0x17, 0x00, 0x0a);
|
|
mipi_dsi_dcs_write_seq(dsi, 0xb6, 0x2c, 0x0b); // set default elvss voltage
|
|
mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
|
|
mipi_dsi_dcs_write_seq(dsi, 0xf7, 0x03); // gamma/aor update
|
|
mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5); // disable LEVEL2 commands
|
|
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display on: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s6e88a0_ams452ef01_off(struct s6e88a0_ams452ef01 *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = ctx->dsi;
|
|
struct device *dev = &dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display off: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(35);
|
|
|
|
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(120);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s6e88a0_ams452ef01_prepare(struct drm_panel *panel)
|
|
{
|
|
struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel);
|
|
struct device *dev = &ctx->dsi->dev;
|
|
int ret;
|
|
|
|
if (ctx->prepared)
|
|
return 0;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
s6e88a0_ams452ef01_reset(ctx);
|
|
|
|
ret = s6e88a0_ams452ef01_on(ctx);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to initialize panel: %d\n", ret);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
regulator_bulk_disable(ARRAY_SIZE(ctx->supplies),
|
|
ctx->supplies);
|
|
return ret;
|
|
}
|
|
|
|
ctx->prepared = true;
|
|
return 0;
|
|
}
|
|
|
|
static int s6e88a0_ams452ef01_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct s6e88a0_ams452ef01 *ctx = to_s6e88a0_ams452ef01(panel);
|
|
struct device *dev = &ctx->dsi->dev;
|
|
int ret;
|
|
|
|
if (!ctx->prepared)
|
|
return 0;
|
|
|
|
ret = s6e88a0_ams452ef01_off(ctx);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
|
|
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
|
|
|
ctx->prepared = false;
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_display_mode s6e88a0_ams452ef01_mode = {
|
|
.clock = (540 + 88 + 4 + 20) * (960 + 14 + 2 + 8) * 60 / 1000,
|
|
.hdisplay = 540,
|
|
.hsync_start = 540 + 88,
|
|
.hsync_end = 540 + 88 + 4,
|
|
.htotal = 540 + 88 + 4 + 20,
|
|
.vdisplay = 960,
|
|
.vsync_start = 960 + 14,
|
|
.vsync_end = 960 + 14 + 2,
|
|
.vtotal = 960 + 14 + 2 + 8,
|
|
.width_mm = 56,
|
|
.height_mm = 100,
|
|
};
|
|
|
|
static int s6e88a0_ams452ef01_get_modes(struct drm_panel *panel,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(connector->dev, &s6e88a0_ams452ef01_mode);
|
|
if (!mode)
|
|
return -ENOMEM;
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
connector->display_info.width_mm = mode->width_mm;
|
|
connector->display_info.height_mm = mode->height_mm;
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs s6e88a0_ams452ef01_panel_funcs = {
|
|
.unprepare = s6e88a0_ams452ef01_unprepare,
|
|
.prepare = s6e88a0_ams452ef01_prepare,
|
|
.get_modes = s6e88a0_ams452ef01_get_modes,
|
|
};
|
|
|
|
static int s6e88a0_ams452ef01_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct s6e88a0_ams452ef01 *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
ctx->supplies[0].supply = "vdd3";
|
|
ctx->supplies[1].supply = "vci";
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
|
|
ctx->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to get regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->reset_gpio)) {
|
|
ret = PTR_ERR(ctx->reset_gpio);
|
|
dev_err(dev, "Failed to get reset-gpios: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ctx->dsi = dsi;
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
dsi->lanes = 2;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST;
|
|
|
|
drm_panel_init(&ctx->panel, dev, &s6e88a0_ams452ef01_panel_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void s6e88a0_ams452ef01_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct s6e88a0_ams452ef01 *ctx = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
ret = mipi_dsi_detach(dsi);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
|
|
|
|
drm_panel_remove(&ctx->panel);
|
|
}
|
|
|
|
static const struct of_device_id s6e88a0_ams452ef01_of_match[] = {
|
|
{ .compatible = "samsung,s6e88a0-ams452ef01" },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, s6e88a0_ams452ef01_of_match);
|
|
|
|
static struct mipi_dsi_driver s6e88a0_ams452ef01_driver = {
|
|
.probe = s6e88a0_ams452ef01_probe,
|
|
.remove = s6e88a0_ams452ef01_remove,
|
|
.driver = {
|
|
.name = "panel-s6e88a0-ams452ef01",
|
|
.of_match_table = s6e88a0_ams452ef01_of_match,
|
|
},
|
|
};
|
|
module_mipi_dsi_driver(s6e88a0_ams452ef01_driver);
|
|
|
|
MODULE_AUTHOR("Michael Srba <Michael.Srba@seznam.cz>");
|
|
MODULE_DESCRIPTION("MIPI-DSI based Panel Driver for AMS452EF01 AMOLED LCD with a S6E88A0 controller");
|
|
MODULE_LICENSE("GPL v2");
|