334 lines
8.1 KiB
C
334 lines
8.1 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/* Copyright (c) 2020 Caleb Connolly <caleb@connolly.tech>
|
|
* Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
|
|
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/backlight.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
struct sofef00_panel {
|
|
struct drm_panel panel;
|
|
struct mipi_dsi_device *dsi;
|
|
struct regulator *supply;
|
|
struct gpio_desc *reset_gpio;
|
|
const struct drm_display_mode *mode;
|
|
bool prepared;
|
|
};
|
|
|
|
static inline
|
|
struct sofef00_panel *to_sofef00_panel(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct sofef00_panel, panel);
|
|
}
|
|
|
|
static void sofef00_panel_reset(struct sofef00_panel *ctx)
|
|
{
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
usleep_range(5000, 6000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
usleep_range(2000, 3000);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
usleep_range(12000, 13000);
|
|
}
|
|
|
|
static int sofef00_panel_on(struct sofef00_panel *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = ctx->dsi;
|
|
struct device *dev = &dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags |= MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
usleep_range(10000, 11000);
|
|
|
|
mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
|
|
|
|
ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set tear on: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
|
|
mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
|
|
mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x07);
|
|
mipi_dsi_dcs_write_seq(dsi, 0xb6, 0x12);
|
|
mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
|
|
mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
|
|
mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
|
|
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display on: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sofef00_panel_off(struct sofef00_panel *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = ctx->dsi;
|
|
struct device *dev = &dsi->dev;
|
|
int ret;
|
|
|
|
dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
|
|
|
|
ret = mipi_dsi_dcs_set_display_off(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to set display off: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(40);
|
|
|
|
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
msleep(160);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sofef00_panel_prepare(struct drm_panel *panel)
|
|
{
|
|
struct sofef00_panel *ctx = to_sofef00_panel(panel);
|
|
struct device *dev = &ctx->dsi->dev;
|
|
int ret;
|
|
|
|
if (ctx->prepared)
|
|
return 0;
|
|
|
|
ret = regulator_enable(ctx->supply);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to enable regulator: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
sofef00_panel_reset(ctx);
|
|
|
|
ret = sofef00_panel_on(ctx);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to initialize panel: %d\n", ret);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
return ret;
|
|
}
|
|
|
|
ctx->prepared = true;
|
|
return 0;
|
|
}
|
|
|
|
static int sofef00_panel_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct sofef00_panel *ctx = to_sofef00_panel(panel);
|
|
struct device *dev = &ctx->dsi->dev;
|
|
int ret;
|
|
|
|
if (!ctx->prepared)
|
|
return 0;
|
|
|
|
ret = sofef00_panel_off(ctx);
|
|
if (ret < 0)
|
|
dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
|
|
|
|
regulator_disable(ctx->supply);
|
|
|
|
ctx->prepared = false;
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_display_mode enchilada_panel_mode = {
|
|
.clock = (1080 + 112 + 16 + 36) * (2280 + 36 + 8 + 12) * 60 / 1000,
|
|
.hdisplay = 1080,
|
|
.hsync_start = 1080 + 112,
|
|
.hsync_end = 1080 + 112 + 16,
|
|
.htotal = 1080 + 112 + 16 + 36,
|
|
.vdisplay = 2280,
|
|
.vsync_start = 2280 + 36,
|
|
.vsync_end = 2280 + 36 + 8,
|
|
.vtotal = 2280 + 36 + 8 + 12,
|
|
.width_mm = 68,
|
|
.height_mm = 145,
|
|
};
|
|
|
|
static const struct drm_display_mode fajita_panel_mode = {
|
|
.clock = (1080 + 72 + 16 + 36) * (2340 + 32 + 4 + 18) * 60 / 1000,
|
|
.hdisplay = 1080,
|
|
.hsync_start = 1080 + 72,
|
|
.hsync_end = 1080 + 72 + 16,
|
|
.htotal = 1080 + 72 + 16 + 36,
|
|
.vdisplay = 2340,
|
|
.vsync_start = 2340 + 32,
|
|
.vsync_end = 2340 + 32 + 4,
|
|
.vtotal = 2340 + 32 + 4 + 18,
|
|
.width_mm = 68,
|
|
.height_mm = 145,
|
|
};
|
|
|
|
static int sofef00_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector)
|
|
{
|
|
struct drm_display_mode *mode;
|
|
struct sofef00_panel *ctx = to_sofef00_panel(panel);
|
|
|
|
mode = drm_mode_duplicate(connector->dev, ctx->mode);
|
|
if (!mode)
|
|
return -ENOMEM;
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
connector->display_info.width_mm = mode->width_mm;
|
|
connector->display_info.height_mm = mode->height_mm;
|
|
drm_mode_probed_add(connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs sofef00_panel_panel_funcs = {
|
|
.prepare = sofef00_panel_prepare,
|
|
.unprepare = sofef00_panel_unprepare,
|
|
.get_modes = sofef00_panel_get_modes,
|
|
};
|
|
|
|
static int sofef00_panel_bl_update_status(struct backlight_device *bl)
|
|
{
|
|
struct mipi_dsi_device *dsi = bl_get_data(bl);
|
|
int err;
|
|
u16 brightness = (u16)backlight_get_brightness(bl);
|
|
|
|
err = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct backlight_ops sofef00_panel_bl_ops = {
|
|
.update_status = sofef00_panel_bl_update_status,
|
|
};
|
|
|
|
static struct backlight_device *
|
|
sofef00_create_backlight(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
const struct backlight_properties props = {
|
|
.type = BACKLIGHT_PLATFORM,
|
|
.brightness = 1023,
|
|
.max_brightness = 1023,
|
|
};
|
|
|
|
return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
|
|
&sofef00_panel_bl_ops, &props);
|
|
}
|
|
|
|
static int sofef00_panel_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct sofef00_panel *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
ctx->mode = of_device_get_match_data(dev);
|
|
|
|
if (!ctx->mode) {
|
|
dev_err(dev, "Missing device mode\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ctx->supply = devm_regulator_get(dev, "vddio");
|
|
if (IS_ERR(ctx->supply))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->supply),
|
|
"Failed to get vddio regulator\n");
|
|
|
|
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(ctx->reset_gpio))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
|
|
"Failed to get reset-gpios\n");
|
|
|
|
ctx->dsi = dsi;
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
|
|
drm_panel_init(&ctx->panel, dev, &sofef00_panel_panel_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
ctx->panel.backlight = sofef00_create_backlight(dsi);
|
|
if (IS_ERR(ctx->panel.backlight))
|
|
return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
|
|
"Failed to create backlight\n");
|
|
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sofef00_panel_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct sofef00_panel *ctx = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
ret = mipi_dsi_detach(dsi);
|
|
if (ret < 0)
|
|
dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
|
|
|
|
drm_panel_remove(&ctx->panel);
|
|
}
|
|
|
|
static const struct of_device_id sofef00_panel_of_match[] = {
|
|
{ // OnePlus 6 / enchilada
|
|
.compatible = "samsung,sofef00",
|
|
.data = &enchilada_panel_mode,
|
|
},
|
|
{ // OnePlus 6T / fajita
|
|
.compatible = "samsung,s6e3fc2x01",
|
|
.data = &fajita_panel_mode,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sofef00_panel_of_match);
|
|
|
|
static struct mipi_dsi_driver sofef00_panel_driver = {
|
|
.probe = sofef00_panel_probe,
|
|
.remove = sofef00_panel_remove,
|
|
.driver = {
|
|
.name = "panel-oneplus6",
|
|
.of_match_table = sofef00_panel_of_match,
|
|
},
|
|
};
|
|
|
|
module_mipi_dsi_driver(sofef00_panel_driver);
|
|
|
|
MODULE_AUTHOR("Caleb Connolly <caleb@connolly.tech>");
|
|
MODULE_DESCRIPTION("DRM driver for Samsung AMOLED DSI panels found in OnePlus 6/6T phones");
|
|
MODULE_LICENSE("GPL v2");
|