linux-zen-server/drivers/mtd/nand/raw/denali.h

399 lines
12 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* NAND Flash Controller Device Driver
* Copyright (c) 2009 - 2010, Intel Corporation and its suppliers.
*/
#ifndef __DENALI_H__
#define __DENALI_H__
#include <linux/bits.h>
#include <linux/completion.h>
#include <linux/list.h>
#include <linux/mtd/rawnand.h>
#include <linux/spinlock_types.h>
#include <linux/types.h>
#define DEVICE_RESET 0x0
#define DEVICE_RESET__BANK(bank) BIT(bank)
#define TRANSFER_SPARE_REG 0x10
#define TRANSFER_SPARE_REG__FLAG BIT(0)
#define LOAD_WAIT_CNT 0x20
#define LOAD_WAIT_CNT__VALUE GENMASK(15, 0)
#define PROGRAM_WAIT_CNT 0x30
#define PROGRAM_WAIT_CNT__VALUE GENMASK(15, 0)
#define ERASE_WAIT_CNT 0x40
#define ERASE_WAIT_CNT__VALUE GENMASK(15, 0)
#define INT_MON_CYCCNT 0x50
#define INT_MON_CYCCNT__VALUE GENMASK(15, 0)
#define RB_PIN_ENABLED 0x60
#define RB_PIN_ENABLED__BANK(bank) BIT(bank)
#define MULTIPLANE_OPERATION 0x70
#define MULTIPLANE_OPERATION__FLAG BIT(0)
#define MULTIPLANE_READ_ENABLE 0x80
#define MULTIPLANE_READ_ENABLE__FLAG BIT(0)
#define COPYBACK_DISABLE 0x90
#define COPYBACK_DISABLE__FLAG BIT(0)
#define CACHE_WRITE_ENABLE 0xa0
#define CACHE_WRITE_ENABLE__FLAG BIT(0)
#define CACHE_READ_ENABLE 0xb0
#define CACHE_READ_ENABLE__FLAG BIT(0)
#define PREFETCH_MODE 0xc0
#define PREFETCH_MODE__PREFETCH_EN BIT(0)
#define PREFETCH_MODE__PREFETCH_BURST_LENGTH GENMASK(15, 4)
#define CHIP_ENABLE_DONT_CARE 0xd0
#define CHIP_EN_DONT_CARE__FLAG BIT(0)
#define ECC_ENABLE 0xe0
#define ECC_ENABLE__FLAG BIT(0)
#define GLOBAL_INT_ENABLE 0xf0
#define GLOBAL_INT_EN_FLAG BIT(0)
#define TWHR2_AND_WE_2_RE 0x100
#define TWHR2_AND_WE_2_RE__WE_2_RE GENMASK(5, 0)
#define TWHR2_AND_WE_2_RE__TWHR2 GENMASK(13, 8)
#define TCWAW_AND_ADDR_2_DATA 0x110
/* The width of ADDR_2_DATA is 6 bit for old IP, 7 bit for new IP */
#define TCWAW_AND_ADDR_2_DATA__ADDR_2_DATA GENMASK(6, 0)
#define TCWAW_AND_ADDR_2_DATA__TCWAW GENMASK(13, 8)
#define RE_2_WE 0x120
#define RE_2_WE__VALUE GENMASK(5, 0)
#define ACC_CLKS 0x130
#define ACC_CLKS__VALUE GENMASK(3, 0)
#define NUMBER_OF_PLANES 0x140
#define NUMBER_OF_PLANES__VALUE GENMASK(2, 0)
#define PAGES_PER_BLOCK 0x150
#define PAGES_PER_BLOCK__VALUE GENMASK(15, 0)
#define DEVICE_WIDTH 0x160
#define DEVICE_WIDTH__VALUE GENMASK(1, 0)
#define DEVICE_MAIN_AREA_SIZE 0x170
#define DEVICE_MAIN_AREA_SIZE__VALUE GENMASK(15, 0)
#define DEVICE_SPARE_AREA_SIZE 0x180
#define DEVICE_SPARE_AREA_SIZE__VALUE GENMASK(15, 0)
#define TWO_ROW_ADDR_CYCLES 0x190
#define TWO_ROW_ADDR_CYCLES__FLAG BIT(0)
#define MULTIPLANE_ADDR_RESTRICT 0x1a0
#define MULTIPLANE_ADDR_RESTRICT__FLAG BIT(0)
#define ECC_CORRECTION 0x1b0
#define ECC_CORRECTION__VALUE GENMASK(4, 0)
#define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16)
#define READ_MODE 0x1c0
#define READ_MODE__VALUE GENMASK(3, 0)
#define WRITE_MODE 0x1d0
#define WRITE_MODE__VALUE GENMASK(3, 0)
#define COPYBACK_MODE 0x1e0
#define COPYBACK_MODE__VALUE GENMASK(3, 0)
#define RDWR_EN_LO_CNT 0x1f0
#define RDWR_EN_LO_CNT__VALUE GENMASK(4, 0)
#define RDWR_EN_HI_CNT 0x200
#define RDWR_EN_HI_CNT__VALUE GENMASK(4, 0)
#define MAX_RD_DELAY 0x210
#define MAX_RD_DELAY__VALUE GENMASK(3, 0)
#define CS_SETUP_CNT 0x220
#define CS_SETUP_CNT__VALUE GENMASK(4, 0)
#define CS_SETUP_CNT__TWB GENMASK(17, 12)
#define SPARE_AREA_SKIP_BYTES 0x230
#define SPARE_AREA_SKIP_BYTES__VALUE GENMASK(5, 0)
#define SPARE_AREA_MARKER 0x240
#define SPARE_AREA_MARKER__VALUE GENMASK(15, 0)
#define DEVICES_CONNECTED 0x250
#define DEVICES_CONNECTED__VALUE GENMASK(2, 0)
#define DIE_MASK 0x260
#define DIE_MASK__VALUE GENMASK(7, 0)
#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE GENMASK(15, 0)
#define WRITE_PROTECT 0x280
#define WRITE_PROTECT__FLAG BIT(0)
#define RE_2_RE 0x290
#define RE_2_RE__VALUE GENMASK(5, 0)
#define MANUFACTURER_ID 0x300
#define MANUFACTURER_ID__VALUE GENMASK(7, 0)
#define DEVICE_ID 0x310
#define DEVICE_ID__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_0 0x320
#define DEVICE_PARAM_0__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_1 0x330
#define DEVICE_PARAM_1__VALUE GENMASK(7, 0)
#define DEVICE_PARAM_2 0x340
#define DEVICE_PARAM_2__VALUE GENMASK(7, 0)
#define LOGICAL_PAGE_DATA_SIZE 0x350
#define LOGICAL_PAGE_DATA_SIZE__VALUE GENMASK(15, 0)
#define LOGICAL_PAGE_SPARE_SIZE 0x360
#define LOGICAL_PAGE_SPARE_SIZE__VALUE GENMASK(15, 0)
#define REVISION 0x370
#define REVISION__VALUE GENMASK(15, 0)
#define ONFI_DEVICE_FEATURES 0x380
#define ONFI_DEVICE_FEATURES__VALUE GENMASK(5, 0)
#define ONFI_OPTIONAL_COMMANDS 0x390
#define ONFI_OPTIONAL_COMMANDS__VALUE GENMASK(5, 0)
#define ONFI_TIMING_MODE 0x3a0
#define ONFI_TIMING_MODE__VALUE GENMASK(5, 0)
#define ONFI_PGM_CACHE_TIMING_MODE 0x3b0
#define ONFI_PGM_CACHE_TIMING_MODE__VALUE GENMASK(5, 0)
#define ONFI_DEVICE_NO_OF_LUNS 0x3c0
#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS GENMASK(7, 0)
#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE BIT(8)
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE GENMASK(15, 0)
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0
#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE GENMASK(15, 0)
#define FEATURES 0x3f0
#define FEATURES__N_BANKS GENMASK(1, 0)
#define FEATURES__ECC_MAX_ERR GENMASK(5, 2)
#define FEATURES__DMA BIT(6)
#define FEATURES__CMD_DMA BIT(7)
#define FEATURES__PARTITION BIT(8)
#define FEATURES__XDMA_SIDEBAND BIT(9)
#define FEATURES__GPREG BIT(10)
#define FEATURES__INDEX_ADDR BIT(11)
#define TRANSFER_MODE 0x400
#define TRANSFER_MODE__VALUE GENMASK(1, 0)
#define INTR_STATUS(bank) (0x410 + (bank) * 0x50)
#define INTR_EN(bank) (0x420 + (bank) * 0x50)
/* bit[1:0] is used differently depending on IP version */
#define INTR__ECC_UNCOR_ERR BIT(0) /* new IP */
#define INTR__ECC_TRANSACTION_DONE BIT(0) /* old IP */
#define INTR__ECC_ERR BIT(1) /* old IP */
#define INTR__DMA_CMD_COMP BIT(2)
#define INTR__TIME_OUT BIT(3)
#define INTR__PROGRAM_FAIL BIT(4)
#define INTR__ERASE_FAIL BIT(5)
#define INTR__LOAD_COMP BIT(6)
#define INTR__PROGRAM_COMP BIT(7)
#define INTR__ERASE_COMP BIT(8)
#define INTR__PIPE_CPYBCK_CMD_COMP BIT(9)
#define INTR__LOCKED_BLK BIT(10)
#define INTR__UNSUP_CMD BIT(11)
#define INTR__INT_ACT BIT(12)
#define INTR__RST_COMP BIT(13)
#define INTR__PIPE_CMD_ERR BIT(14)
#define INTR__PAGE_XFER_INC BIT(15)
#define INTR__ERASED_PAGE BIT(16)
#define PAGE_CNT(bank) (0x430 + (bank) * 0x50)
#define ERR_PAGE_ADDR(bank) (0x440 + (bank) * 0x50)
#define ERR_BLOCK_ADDR(bank) (0x450 + (bank) * 0x50)
#define ECC_THRESHOLD 0x600
#define ECC_THRESHOLD__VALUE GENMASK(9, 0)
#define ECC_ERROR_BLOCK_ADDRESS 0x610
#define ECC_ERROR_BLOCK_ADDRESS__VALUE GENMASK(15, 0)
#define ECC_ERROR_PAGE_ADDRESS 0x620
#define ECC_ERROR_PAGE_ADDRESS__VALUE GENMASK(11, 0)
#define ECC_ERROR_PAGE_ADDRESS__BANK GENMASK(15, 12)
#define ECC_ERROR_ADDRESS 0x630
#define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0)
#define ECC_ERROR_ADDRESS__SECTOR GENMASK(15, 12)
#define ERR_CORRECTION_INFO 0x640
#define ERR_CORRECTION_INFO__BYTE GENMASK(7, 0)
#define ERR_CORRECTION_INFO__DEVICE GENMASK(11, 8)
#define ERR_CORRECTION_INFO__UNCOR BIT(14)
#define ERR_CORRECTION_INFO__LAST_ERR BIT(15)
#define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10)
#define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8)
#define ECC_COR_INFO__MAX_ERRORS GENMASK(6, 0)
#define ECC_COR_INFO__UNCOR_ERR BIT(7)
#define CFG_DATA_BLOCK_SIZE 0x6b0
#define CFG_LAST_DATA_BLOCK_SIZE 0x6c0
#define CFG_NUM_DATA_BLOCKS 0x6d0
#define CFG_META_DATA_SIZE 0x6e0
#define DMA_ENABLE 0x700
#define DMA_ENABLE__FLAG BIT(0)
#define IGNORE_ECC_DONE 0x710
#define IGNORE_ECC_DONE__FLAG BIT(0)
#define DMA_INTR 0x720
#define DMA_INTR_EN 0x730
#define DMA_INTR__TARGET_ERROR BIT(0)
#define DMA_INTR__DESC_COMP_CHANNEL0 BIT(1)
#define DMA_INTR__DESC_COMP_CHANNEL1 BIT(2)
#define DMA_INTR__DESC_COMP_CHANNEL2 BIT(3)
#define DMA_INTR__DESC_COMP_CHANNEL3 BIT(4)
#define DMA_INTR__MEMCOPY_DESC_COMP BIT(5)
#define TARGET_ERR_ADDR_LO 0x740
#define TARGET_ERR_ADDR_LO__VALUE GENMASK(15, 0)
#define TARGET_ERR_ADDR_HI 0x750
#define TARGET_ERR_ADDR_HI__VALUE GENMASK(15, 0)
#define CHNL_ACTIVE 0x760
#define CHNL_ACTIVE__CHANNEL0 BIT(0)
#define CHNL_ACTIVE__CHANNEL1 BIT(1)
#define CHNL_ACTIVE__CHANNEL2 BIT(2)
#define CHNL_ACTIVE__CHANNEL3 BIT(3)
/**
* struct denali_chip_sel - per-CS data of Denali NAND
*
* @bank: bank id of the controller this CS is connected to
* @hwhr2_and_we_2_re: value of timing register HWHR2_AND_WE_2_RE
* @tcwaw_and_addr_2_data: value of timing register TCWAW_AND_ADDR_2_DATA
* @re_2_we: value of timing register RE_2_WE
* @acc_clks: value of timing register ACC_CLKS
* @rdwr_en_lo_cnt: value of timing register RDWR_EN_LO_CNT
* @rdwr_en_hi_cnt: value of timing register RDWR_EN_HI_CNT
* @cs_setup_cnt: value of timing register CS_SETUP_CNT
* @re_2_re: value of timing register RE_2_RE
*/
struct denali_chip_sel {
int bank;
u32 hwhr2_and_we_2_re;
u32 tcwaw_and_addr_2_data;
u32 re_2_we;
u32 acc_clks;
u32 rdwr_en_lo_cnt;
u32 rdwr_en_hi_cnt;
u32 cs_setup_cnt;
u32 re_2_re;
};
/**
* struct denali_chip - per-chip data of Denali NAND
*
* @chip: base NAND chip structure
* @node: node to be used to associate this chip with the controller
* @nsels: the number of CS lines of this chip
* @sels: the array of per-cs data
*/
struct denali_chip {
struct nand_chip chip;
struct list_head node;
unsigned int nsels;
struct denali_chip_sel sels[];
};
/**
* struct denali_controller - Denali NAND controller data
*
* @controller: base NAND controller structure
* @dev: device
* @chips: the list of chips attached to this controller
* @clk_rate: frequency of core clock
* @clk_x_rate: frequency of bus interface clock
* @reg: base of Register Interface
* @host: base of Host Data/Command interface
* @complete: completion used to wait for interrupts
* @irq: interrupt number
* @irq_mask: interrupt bits the controller is waiting for
* @irq_status: interrupt bits of events that have happened
* @irq_lock: lock to protect @irq_mask and @irq_status
* @dma_avail: set if DMA engine is available
* @devs_per_cs: number of devices connected in parallel
* @oob_skip_bytes: number of bytes in OOB skipped by the ECC engine
* @active_bank: active bank id
* @nbanks: the number of banks supported by this controller
* @revision: IP revision
* @caps: controller capabilities that cannot be detected run-time
* @ecc_caps: ECC engine capabilities
* @host_read: callback for read access of Host Data/Command Interface
* @host_write: callback for write access of Host Data/Command Interface
* @setup_dma: callback for setup of the Data DMA
*/
struct denali_controller {
struct nand_controller controller;
struct device *dev;
struct list_head chips;
unsigned long clk_rate;
unsigned long clk_x_rate;
void __iomem *reg;
void __iomem *host;
struct completion complete;
int irq;
u32 irq_mask;
u32 irq_status;
spinlock_t irq_lock;
bool dma_avail;
int devs_per_cs;
int oob_skip_bytes;
int active_bank;
int nbanks;
unsigned int revision;
unsigned int caps;
const struct nand_ecc_caps *ecc_caps;
u32 (*host_read)(struct denali_controller *denali, u32 addr);
void (*host_write)(struct denali_controller *denali, u32 addr,
u32 data);
void (*setup_dma)(struct denali_controller *denali, dma_addr_t dma_addr,
int page, bool write);
};
#define DENALI_CAP_HW_ECC_FIXUP BIT(0)
#define DENALI_CAP_DMA_64BIT BIT(1)
int denali_calc_ecc_bytes(int step_size, int strength);
int denali_chip_init(struct denali_controller *denali,
struct denali_chip *dchip);
int denali_init(struct denali_controller *denali);
void denali_remove(struct denali_controller *denali);
#endif /* __DENALI_H__ */