181 lines
6.7 KiB
C
181 lines
6.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* Freescale GPMI NAND Flash Driver
|
|
*
|
|
* Copyright 2008-2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2008 Embedded Alley Solutions, Inc.
|
|
*/
|
|
#ifndef __GPMI_NAND_GPMI_REGS_H
|
|
#define __GPMI_NAND_GPMI_REGS_H
|
|
|
|
#define HW_GPMI_CTRL0 0x00000000
|
|
#define HW_GPMI_CTRL0_SET 0x00000004
|
|
#define HW_GPMI_CTRL0_CLR 0x00000008
|
|
#define HW_GPMI_CTRL0_TOG 0x0000000c
|
|
|
|
#define BP_GPMI_CTRL0_COMMAND_MODE 24
|
|
#define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE)
|
|
#define BF_GPMI_CTRL0_COMMAND_MODE(v) \
|
|
(((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
|
|
#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
|
|
#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
|
|
#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
|
|
#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
|
|
|
|
#define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23)
|
|
#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0
|
|
#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1
|
|
|
|
/*
|
|
* Difference in LOCK_CS between imx23 and imx28 :
|
|
* This bit may impact the _POWER_ consumption. So some chips
|
|
* do not set it.
|
|
*/
|
|
#define MX23_BP_GPMI_CTRL0_LOCK_CS 22
|
|
#define MX28_BP_GPMI_CTRL0_LOCK_CS 27
|
|
#define LOCK_CS_ENABLE 0x1
|
|
#define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0
|
|
|
|
/* Difference in CS between imx23 and imx28 */
|
|
#define BP_GPMI_CTRL0_CS 20
|
|
#define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS)
|
|
#define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS)
|
|
#define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \
|
|
(GPMI_IS_MX23((x)) \
|
|
? MX23_BM_GPMI_CTRL0_CS \
|
|
: MX28_BM_GPMI_CTRL0_CS))
|
|
|
|
#define BP_GPMI_CTRL0_ADDRESS 17
|
|
#define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS)
|
|
#define BF_GPMI_CTRL0_ADDRESS(v) \
|
|
(((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
|
|
#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
|
|
#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
|
|
#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
|
|
|
|
#define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
|
|
#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0
|
|
#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1
|
|
|
|
#define BP_GPMI_CTRL0_XFER_COUNT 0
|
|
#define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT)
|
|
#define BF_GPMI_CTRL0_XFER_COUNT(v) \
|
|
(((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
|
|
|
|
#define HW_GPMI_COMPARE 0x00000010
|
|
|
|
#define HW_GPMI_ECCCTRL 0x00000020
|
|
#define HW_GPMI_ECCCTRL_SET 0x00000024
|
|
#define HW_GPMI_ECCCTRL_CLR 0x00000028
|
|
#define HW_GPMI_ECCCTRL_TOG 0x0000002c
|
|
|
|
#define BP_GPMI_ECCCTRL_ECC_CMD 13
|
|
#define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD)
|
|
#define BF_GPMI_ECCCTRL_ECC_CMD(v) \
|
|
(((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
|
|
#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0
|
|
#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1
|
|
|
|
#define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
|
|
#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1
|
|
#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0
|
|
|
|
#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
|
|
#define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
|
|
#define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \
|
|
(((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
|
|
#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100
|
|
#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF
|
|
|
|
#define HW_GPMI_ECCCOUNT 0x00000030
|
|
#define HW_GPMI_PAYLOAD 0x00000040
|
|
#define HW_GPMI_AUXILIARY 0x00000050
|
|
#define HW_GPMI_CTRL1 0x00000060
|
|
#define HW_GPMI_CTRL1_SET 0x00000064
|
|
#define HW_GPMI_CTRL1_CLR 0x00000068
|
|
#define HW_GPMI_CTRL1_TOG 0x0000006c
|
|
|
|
#define BP_GPMI_CTRL1_DECOUPLE_CS 24
|
|
#define BM_GPMI_CTRL1_DECOUPLE_CS (1 << BP_GPMI_CTRL1_DECOUPLE_CS)
|
|
|
|
#define BP_GPMI_CTRL1_WRN_DLY_SEL 22
|
|
#define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL)
|
|
#define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \
|
|
(((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL)
|
|
#define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS 0x0
|
|
#define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS 0x1
|
|
#define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS 0x2
|
|
#define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY 0x3
|
|
|
|
#define BM_GPMI_CTRL1_GANGED_RDYBUSY (1 << 19)
|
|
#define BM_GPMI_CTRL1_BCH_MODE (1 << 18)
|
|
|
|
#define BP_GPMI_CTRL1_DLL_ENABLE 17
|
|
#define BM_GPMI_CTRL1_DLL_ENABLE (1 << BP_GPMI_CTRL1_DLL_ENABLE)
|
|
|
|
#define BP_GPMI_CTRL1_HALF_PERIOD 16
|
|
#define BM_GPMI_CTRL1_HALF_PERIOD (1 << BP_GPMI_CTRL1_HALF_PERIOD)
|
|
|
|
#define BP_GPMI_CTRL1_RDN_DELAY 12
|
|
#define BM_GPMI_CTRL1_RDN_DELAY (0xf << BP_GPMI_CTRL1_RDN_DELAY)
|
|
#define BF_GPMI_CTRL1_RDN_DELAY(v) \
|
|
(((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
|
|
|
|
#define BM_GPMI_CTRL1_DEV_RESET (1 << 3)
|
|
#define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0
|
|
#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1
|
|
|
|
#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
|
|
#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0
|
|
#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1
|
|
|
|
#define BM_GPMI_CTRL1_CAMERA_MODE (1 << 1)
|
|
#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0
|
|
#define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1
|
|
|
|
#define BM_GPMI_CTRL1_GPMI_MODE (1 << 0)
|
|
|
|
#define BM_GPMI_CTRL1_CLEAR_MASK (BM_GPMI_CTRL1_WRN_DLY_SEL | \
|
|
BM_GPMI_CTRL1_DLL_ENABLE | \
|
|
BM_GPMI_CTRL1_RDN_DELAY | \
|
|
BM_GPMI_CTRL1_HALF_PERIOD)
|
|
|
|
#define HW_GPMI_TIMING0 0x00000070
|
|
|
|
#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
|
|
#define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
|
|
#define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \
|
|
(((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
|
|
|
|
#define BP_GPMI_TIMING0_DATA_HOLD 8
|
|
#define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD)
|
|
#define BF_GPMI_TIMING0_DATA_HOLD(v) \
|
|
(((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
|
|
|
|
#define BP_GPMI_TIMING0_DATA_SETUP 0
|
|
#define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP)
|
|
#define BF_GPMI_TIMING0_DATA_SETUP(v) \
|
|
(((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
|
|
|
|
#define HW_GPMI_TIMING1 0x00000080
|
|
#define BP_GPMI_TIMING1_BUSY_TIMEOUT 16
|
|
#define BM_GPMI_TIMING1_BUSY_TIMEOUT (0xffff << BP_GPMI_TIMING1_BUSY_TIMEOUT)
|
|
#define BF_GPMI_TIMING1_BUSY_TIMEOUT(v) \
|
|
(((v) << BP_GPMI_TIMING1_BUSY_TIMEOUT) & BM_GPMI_TIMING1_BUSY_TIMEOUT)
|
|
|
|
#define HW_GPMI_TIMING2 0x00000090
|
|
#define HW_GPMI_DATA 0x000000a0
|
|
|
|
/* MX28 uses this to detect READY. */
|
|
#define HW_GPMI_STAT 0x000000b0
|
|
#define MX28_BP_GPMI_STAT_READY_BUSY 24
|
|
#define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY)
|
|
#define MX28_BF_GPMI_STAT_READY_BUSY(v) \
|
|
(((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
|
|
|
|
/* MX23 uses this to detect READY. */
|
|
#define HW_GPMI_DEBUG 0x000000c0
|
|
#define MX23_BP_GPMI_DEBUG_READY0 28
|
|
#define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0)
|
|
#endif
|