linux-zen-server/drivers/net/ethernet/marvell/octeon_ep/octep_main.h

360 lines
9.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/* Marvell Octeon EP (EndPoint) Ethernet Driver
*
* Copyright (C) 2020 Marvell.
*
*/
#ifndef _OCTEP_MAIN_H_
#define _OCTEP_MAIN_H_
#include "octep_tx.h"
#include "octep_rx.h"
#include "octep_ctrl_mbox.h"
#define OCTEP_DRV_NAME "octeon_ep"
#define OCTEP_DRV_STRING "Marvell Octeon EndPoint NIC Driver"
#define OCTEP_PCIID_CN93_PF 0xB200177d
#define OCTEP_PCIID_CN93_VF 0xB203177d
#define OCTEP_PCI_DEVICE_ID_CN93_PF 0xB200
#define OCTEP_PCI_DEVICE_ID_CN93_VF 0xB203
#define OCTEP_PCI_DEVICE_ID_CNF95N_PF 0xB400 //95N PF
#define OCTEP_MAX_QUEUES 63
#define OCTEP_MAX_IQ OCTEP_MAX_QUEUES
#define OCTEP_MAX_OQ OCTEP_MAX_QUEUES
#define OCTEP_MAX_VF 64
#define OCTEP_MAX_MSIX_VECTORS OCTEP_MAX_OQ
/* Flags to disable and enable Interrupts */
#define OCTEP_INPUT_INTR (1)
#define OCTEP_OUTPUT_INTR (2)
#define OCTEP_MBOX_INTR (4)
#define OCTEP_ALL_INTR 0xff
#define OCTEP_IQ_INTR_RESEND_BIT 59
#define OCTEP_OQ_INTR_RESEND_BIT 59
#define OCTEP_MMIO_REGIONS 3
/* PCI address space mapping information.
* Each of the 3 address spaces given by BAR0, BAR2 and BAR4 of
* Octeon gets mapped to different physical address spaces in
* the kernel.
*/
struct octep_mmio {
/* The physical address to which the PCI address space is mapped. */
u8 __iomem *hw_addr;
/* Flag indicating the mapping was successful. */
int mapped;
};
struct octep_pci_win_regs {
u8 __iomem *pci_win_wr_addr;
u8 __iomem *pci_win_rd_addr;
u8 __iomem *pci_win_wr_data;
u8 __iomem *pci_win_rd_data;
};
struct octep_hw_ops {
void (*setup_iq_regs)(struct octep_device *oct, int q);
void (*setup_oq_regs)(struct octep_device *oct, int q);
void (*setup_mbox_regs)(struct octep_device *oct, int mbox);
irqreturn_t (*non_ioq_intr_handler)(void *ioq_vector);
irqreturn_t (*ioq_intr_handler)(void *ioq_vector);
int (*soft_reset)(struct octep_device *oct);
void (*reinit_regs)(struct octep_device *oct);
u32 (*update_iq_read_idx)(struct octep_iq *iq);
void (*enable_interrupts)(struct octep_device *oct);
void (*disable_interrupts)(struct octep_device *oct);
void (*enable_io_queues)(struct octep_device *oct);
void (*disable_io_queues)(struct octep_device *oct);
void (*enable_iq)(struct octep_device *oct, int q);
void (*disable_iq)(struct octep_device *oct, int q);
void (*enable_oq)(struct octep_device *oct, int q);
void (*disable_oq)(struct octep_device *oct, int q);
void (*reset_io_queues)(struct octep_device *oct);
void (*dump_registers)(struct octep_device *oct);
};
/* Octeon mailbox data */
struct octep_mbox_data {
u32 cmd;
u32 total_len;
u32 recv_len;
u32 rsvd;
u64 *data;
};
/* Octeon device mailbox */
struct octep_mbox {
/* A spinlock to protect access to this q_mbox. */
spinlock_t lock;
u32 q_no;
u32 state;
/* SLI_MAC_PF_MBOX_INT for PF, SLI_PKT_MBOX_INT for VF. */
u8 __iomem *mbox_int_reg;
/* SLI_PKT_PF_VF_MBOX_SIG(0) for PF,
* SLI_PKT_PF_VF_MBOX_SIG(1) for VF.
*/
u8 __iomem *mbox_write_reg;
/* SLI_PKT_PF_VF_MBOX_SIG(1) for PF,
* SLI_PKT_PF_VF_MBOX_SIG(0) for VF.
*/
u8 __iomem *mbox_read_reg;
struct octep_mbox_data mbox_data;
};
/* Tx/Rx queue vector per interrupt. */
struct octep_ioq_vector {
char name[OCTEP_MSIX_NAME_SIZE];
struct napi_struct napi;
struct octep_device *octep_dev;
struct octep_iq *iq;
struct octep_oq *oq;
cpumask_t affinity_mask;
};
/* Octeon hardware/firmware offload capability flags. */
#define OCTEP_CAP_TX_CHECKSUM BIT(0)
#define OCTEP_CAP_RX_CHECKSUM BIT(1)
#define OCTEP_CAP_TSO BIT(2)
/* Link modes */
enum octep_link_mode_bit_indices {
OCTEP_LINK_MODE_10GBASE_T = 0,
OCTEP_LINK_MODE_10GBASE_R,
OCTEP_LINK_MODE_10GBASE_CR,
OCTEP_LINK_MODE_10GBASE_KR,
OCTEP_LINK_MODE_10GBASE_LR,
OCTEP_LINK_MODE_10GBASE_SR,
OCTEP_LINK_MODE_25GBASE_CR,
OCTEP_LINK_MODE_25GBASE_KR,
OCTEP_LINK_MODE_25GBASE_SR,
OCTEP_LINK_MODE_40GBASE_CR4,
OCTEP_LINK_MODE_40GBASE_KR4,
OCTEP_LINK_MODE_40GBASE_LR4,
OCTEP_LINK_MODE_40GBASE_SR4,
OCTEP_LINK_MODE_50GBASE_CR2,
OCTEP_LINK_MODE_50GBASE_KR2,
OCTEP_LINK_MODE_50GBASE_SR2,
OCTEP_LINK_MODE_50GBASE_CR,
OCTEP_LINK_MODE_50GBASE_KR,
OCTEP_LINK_MODE_50GBASE_LR,
OCTEP_LINK_MODE_50GBASE_SR,
OCTEP_LINK_MODE_100GBASE_CR4,
OCTEP_LINK_MODE_100GBASE_KR4,
OCTEP_LINK_MODE_100GBASE_LR4,
OCTEP_LINK_MODE_100GBASE_SR4,
OCTEP_LINK_MODE_NBITS
};
/* Hardware interface link state information. */
struct octep_iface_link_info {
/* Bitmap of Supported link speeds/modes. */
u64 supported_modes;
/* Bitmap of Advertised link speeds/modes. */
u64 advertised_modes;
/* Negotiated link speed in Mbps. */
u32 speed;
/* MTU */
u16 mtu;
/* Autonegotation state. */
#define OCTEP_LINK_MODE_AUTONEG_SUPPORTED BIT(0)
#define OCTEP_LINK_MODE_AUTONEG_ADVERTISED BIT(1)
u8 autoneg;
/* Pause frames setting. */
#define OCTEP_LINK_MODE_PAUSE_SUPPORTED BIT(0)
#define OCTEP_LINK_MODE_PAUSE_ADVERTISED BIT(1)
u8 pause;
/* Admin state of the link (ifconfig <iface> up/down */
u8 admin_up;
/* Operational state of the link: physical link is up down */
u8 oper_up;
};
/* The Octeon device specific private data structure.
* Each Octeon device has this structure to represent all its components.
*/
struct octep_device {
struct octep_config *conf;
/* Octeon Chip type. */
u16 chip_id;
u16 rev_id;
/* Device capabilities enabled */
u64 caps_enabled;
/* Device capabilities supported */
u64 caps_supported;
/* Pointer to basic Linux device */
struct device *dev;
/* Linux PCI device pointer */
struct pci_dev *pdev;
/* Netdev corresponding to the Octeon device */
struct net_device *netdev;
/* memory mapped io range */
struct octep_mmio mmio[OCTEP_MMIO_REGIONS];
/* MAC address */
u8 mac_addr[ETH_ALEN];
/* Tx queues (IQ: Instruction Queue) */
u16 num_iqs;
/* pkind value to be used in every Tx hardware descriptor */
u8 pkind;
/* Pointers to Octeon Tx queues */
struct octep_iq *iq[OCTEP_MAX_IQ];
/* Rx queues (OQ: Output Queue) */
u16 num_oqs;
/* Pointers to Octeon Rx queues */
struct octep_oq *oq[OCTEP_MAX_OQ];
/* Hardware port number of the PCIe interface */
u16 pcie_port;
/* PCI Window registers to access some hardware CSRs */
struct octep_pci_win_regs pci_win_regs;
/* Hardware operations */
struct octep_hw_ops hw_ops;
/* IRQ info */
u16 num_irqs;
u16 num_non_ioq_irqs;
char *non_ioq_irq_names;
struct msix_entry *msix_entries;
/* IOq information of it's corresponding MSI-X interrupt. */
struct octep_ioq_vector *ioq_vector[OCTEP_MAX_QUEUES];
/* Hardware Interface Tx statistics */
struct octep_iface_tx_stats iface_tx_stats;
/* Hardware Interface Rx statistics */
struct octep_iface_rx_stats iface_rx_stats;
/* Hardware Interface Link info like supported modes, aneg support */
struct octep_iface_link_info link_info;
/* Mailbox to talk to VFs */
struct octep_mbox *mbox[OCTEP_MAX_VF];
/* Work entry to handle Tx timeout */
struct work_struct tx_timeout_task;
/* control mbox over pf */
struct octep_ctrl_mbox ctrl_mbox;
/* offset for iface stats */
u32 ctrl_mbox_ifstats_offset;
/* Work entry to handle ctrl mbox interrupt */
struct work_struct ctrl_mbox_task;
};
static inline u16 OCTEP_MAJOR_REV(struct octep_device *oct)
{
u16 rev = (oct->rev_id & 0xC) >> 2;
return (rev == 0) ? 1 : rev;
}
static inline u16 OCTEP_MINOR_REV(struct octep_device *oct)
{
return (oct->rev_id & 0x3);
}
/* Octeon CSR read/write access APIs */
#define octep_write_csr(octep_dev, reg_off, value) \
writel(value, (octep_dev)->mmio[0].hw_addr + (reg_off))
#define octep_write_csr64(octep_dev, reg_off, val64) \
writeq(val64, (octep_dev)->mmio[0].hw_addr + (reg_off))
#define octep_read_csr(octep_dev, reg_off) \
readl((octep_dev)->mmio[0].hw_addr + (reg_off))
#define octep_read_csr64(octep_dev, reg_off) \
readq((octep_dev)->mmio[0].hw_addr + (reg_off))
/* Read windowed register.
* @param oct - pointer to the Octeon device.
* @param addr - Address of the register to read.
*
* This routine is called to read from the indirectly accessed
* Octeon registers that are visible through a PCI BAR0 mapped window
* register.
* @return - 64 bit value read from the register.
*/
static inline u64
OCTEP_PCI_WIN_READ(struct octep_device *oct, u64 addr)
{
u64 val64;
addr |= 1ull << 53; /* read 8 bytes */
writeq(addr, oct->pci_win_regs.pci_win_rd_addr);
val64 = readq(oct->pci_win_regs.pci_win_rd_data);
dev_dbg(&oct->pdev->dev,
"%s: reg: 0x%016llx val: 0x%016llx\n", __func__, addr, val64);
return val64;
}
/* Write windowed register.
* @param oct - pointer to the Octeon device.
* @param addr - Address of the register to write
* @param val - Value to write
*
* This routine is called to write to the indirectly accessed
* Octeon registers that are visible through a PCI BAR0 mapped window
* register.
* @return Nothing.
*/
static inline void
OCTEP_PCI_WIN_WRITE(struct octep_device *oct, u64 addr, u64 val)
{
writeq(addr, oct->pci_win_regs.pci_win_wr_addr);
writeq(val, oct->pci_win_regs.pci_win_wr_data);
dev_dbg(&oct->pdev->dev,
"%s: reg: 0x%016llx val: 0x%016llx\n", __func__, addr, val);
}
extern struct workqueue_struct *octep_wq;
int octep_device_setup(struct octep_device *oct);
int octep_setup_iqs(struct octep_device *oct);
void octep_free_iqs(struct octep_device *oct);
void octep_clean_iqs(struct octep_device *oct);
int octep_setup_oqs(struct octep_device *oct);
void octep_free_oqs(struct octep_device *oct);
void octep_oq_dbell_init(struct octep_device *oct);
void octep_device_setup_cn93_pf(struct octep_device *oct);
int octep_iq_process_completions(struct octep_iq *iq, u16 budget);
int octep_oq_process_rx(struct octep_oq *oq, int budget);
void octep_set_ethtool_ops(struct net_device *netdev);
#endif /* _OCTEP_MAIN_H_ */