685 lines
17 KiB
C
685 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*******************************************************************************
|
|
STMMAC Ethernet Driver -- MDIO bus implementation
|
|
Provides Bus interface for MII registers
|
|
|
|
Copyright (C) 2007-2009 STMicroelectronics Ltd
|
|
|
|
|
|
Author: Carl Shaw <carl.shaw@st.com>
|
|
Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
*******************************************************************************/
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/property.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "dwxgmac2.h"
|
|
#include "stmmac.h"
|
|
|
|
#define MII_BUSY 0x00000001
|
|
#define MII_WRITE 0x00000002
|
|
#define MII_DATA_MASK GENMASK(15, 0)
|
|
|
|
/* GMAC4 defines */
|
|
#define MII_GMAC4_GOC_SHIFT 2
|
|
#define MII_GMAC4_REG_ADDR_SHIFT 16
|
|
#define MII_GMAC4_WRITE (1 << MII_GMAC4_GOC_SHIFT)
|
|
#define MII_GMAC4_READ (3 << MII_GMAC4_GOC_SHIFT)
|
|
#define MII_GMAC4_C45E BIT(1)
|
|
|
|
/* XGMAC defines */
|
|
#define MII_XGMAC_SADDR BIT(18)
|
|
#define MII_XGMAC_CMD_SHIFT 16
|
|
#define MII_XGMAC_WRITE (1 << MII_XGMAC_CMD_SHIFT)
|
|
#define MII_XGMAC_READ (3 << MII_XGMAC_CMD_SHIFT)
|
|
#define MII_XGMAC_BUSY BIT(22)
|
|
#define MII_XGMAC_MAX_C22ADDR 3
|
|
#define MII_XGMAC_C22P_MASK GENMASK(MII_XGMAC_MAX_C22ADDR, 0)
|
|
#define MII_XGMAC_PA_SHIFT 16
|
|
#define MII_XGMAC_DA_SHIFT 21
|
|
|
|
static void stmmac_xgmac2_c45_format(struct stmmac_priv *priv, int phyaddr,
|
|
int devad, int phyreg, u32 *hw_addr)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Set port as Clause 45 */
|
|
tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
|
|
tmp &= ~BIT(phyaddr);
|
|
writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);
|
|
|
|
*hw_addr = (phyaddr << MII_XGMAC_PA_SHIFT) | (phyreg & 0xffff);
|
|
*hw_addr |= devad << MII_XGMAC_DA_SHIFT;
|
|
}
|
|
|
|
static void stmmac_xgmac2_c22_format(struct stmmac_priv *priv, int phyaddr,
|
|
int phyreg, u32 *hw_addr)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Set port as Clause 22 */
|
|
tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
|
|
tmp &= ~MII_XGMAC_C22P_MASK;
|
|
tmp |= BIT(phyaddr);
|
|
writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);
|
|
|
|
*hw_addr = (phyaddr << MII_XGMAC_PA_SHIFT) | (phyreg & 0x1f);
|
|
}
|
|
|
|
static int stmmac_xgmac2_mdio_read(struct stmmac_priv *priv, u32 addr,
|
|
u32 value)
|
|
{
|
|
unsigned int mii_address = priv->hw->mii.addr;
|
|
unsigned int mii_data = priv->hw->mii.data;
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(priv->device);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Wait until any existing MII operation is complete */
|
|
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
|
|
!(tmp & MII_XGMAC_BUSY), 100, 10000)) {
|
|
ret = -EBUSY;
|
|
goto err_disable_clks;
|
|
}
|
|
|
|
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
|
|
& priv->hw->mii.clk_csr_mask;
|
|
value |= MII_XGMAC_READ;
|
|
|
|
/* Wait until any existing MII operation is complete */
|
|
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
|
|
!(tmp & MII_XGMAC_BUSY), 100, 10000)) {
|
|
ret = -EBUSY;
|
|
goto err_disable_clks;
|
|
}
|
|
|
|
/* Set the MII address register to read */
|
|
writel(addr, priv->ioaddr + mii_address);
|
|
writel(value, priv->ioaddr + mii_data);
|
|
|
|
/* Wait until any existing MII operation is complete */
|
|
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
|
|
!(tmp & MII_XGMAC_BUSY), 100, 10000)) {
|
|
ret = -EBUSY;
|
|
goto err_disable_clks;
|
|
}
|
|
|
|
/* Read the data from the MII data register */
|
|
ret = (int)readl(priv->ioaddr + mii_data) & GENMASK(15, 0);
|
|
|
|
err_disable_clks:
|
|
pm_runtime_put(priv->device);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stmmac_xgmac2_mdio_read_c22(struct mii_bus *bus, int phyaddr,
|
|
int phyreg)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv;
|
|
u32 addr;
|
|
|
|
priv = netdev_priv(ndev);
|
|
|
|
/* HW does not support C22 addr >= 4 */
|
|
if (phyaddr > MII_XGMAC_MAX_C22ADDR)
|
|
return -ENODEV;
|
|
|
|
stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
|
|
|
|
return stmmac_xgmac2_mdio_read(priv, addr, MII_XGMAC_BUSY);
|
|
}
|
|
|
|
static int stmmac_xgmac2_mdio_read_c45(struct mii_bus *bus, int phyaddr,
|
|
int devad, int phyreg)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv;
|
|
u32 addr;
|
|
|
|
priv = netdev_priv(ndev);
|
|
|
|
stmmac_xgmac2_c45_format(priv, phyaddr, devad, phyreg, &addr);
|
|
|
|
return stmmac_xgmac2_mdio_read(priv, addr, MII_XGMAC_BUSY);
|
|
}
|
|
|
|
static int stmmac_xgmac2_mdio_write(struct stmmac_priv *priv, u32 addr,
|
|
u32 value, u16 phydata)
|
|
{
|
|
unsigned int mii_address = priv->hw->mii.addr;
|
|
unsigned int mii_data = priv->hw->mii.data;
|
|
u32 tmp;
|
|
int ret;
|
|
|
|
ret = pm_runtime_resume_and_get(priv->device);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Wait until any existing MII operation is complete */
|
|
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
|
|
!(tmp & MII_XGMAC_BUSY), 100, 10000)) {
|
|
ret = -EBUSY;
|
|
goto err_disable_clks;
|
|
}
|
|
|
|
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
|
|
& priv->hw->mii.clk_csr_mask;
|
|
value |= phydata;
|
|
value |= MII_XGMAC_WRITE;
|
|
|
|
/* Wait until any existing MII operation is complete */
|
|
if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
|
|
!(tmp & MII_XGMAC_BUSY), 100, 10000)) {
|
|
ret = -EBUSY;
|
|
goto err_disable_clks;
|
|
}
|
|
|
|
/* Set the MII address register to write */
|
|
writel(addr, priv->ioaddr + mii_address);
|
|
writel(value, priv->ioaddr + mii_data);
|
|
|
|
/* Wait until any existing MII operation is complete */
|
|
ret = readl_poll_timeout(priv->ioaddr + mii_data, tmp,
|
|
!(tmp & MII_XGMAC_BUSY), 100, 10000);
|
|
|
|
err_disable_clks:
|
|
pm_runtime_put(priv->device);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stmmac_xgmac2_mdio_write_c22(struct mii_bus *bus, int phyaddr,
|
|
int phyreg, u16 phydata)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv;
|
|
u32 addr;
|
|
|
|
priv = netdev_priv(ndev);
|
|
|
|
/* HW does not support C22 addr >= 4 */
|
|
if (phyaddr > MII_XGMAC_MAX_C22ADDR)
|
|
return -ENODEV;
|
|
|
|
stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
|
|
|
|
return stmmac_xgmac2_mdio_write(priv, addr,
|
|
MII_XGMAC_BUSY | MII_XGMAC_SADDR, phydata);
|
|
}
|
|
|
|
static int stmmac_xgmac2_mdio_write_c45(struct mii_bus *bus, int phyaddr,
|
|
int devad, int phyreg, u16 phydata)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv;
|
|
u32 addr;
|
|
|
|
priv = netdev_priv(ndev);
|
|
|
|
stmmac_xgmac2_c45_format(priv, phyaddr, devad, phyreg, &addr);
|
|
|
|
return stmmac_xgmac2_mdio_write(priv, addr, MII_XGMAC_BUSY,
|
|
phydata);
|
|
}
|
|
|
|
static int stmmac_mdio_read(struct stmmac_priv *priv, int data, u32 value)
|
|
{
|
|
unsigned int mii_address = priv->hw->mii.addr;
|
|
unsigned int mii_data = priv->hw->mii.data;
|
|
u32 v;
|
|
|
|
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
|
|
100, 10000))
|
|
return -EBUSY;
|
|
|
|
writel(data, priv->ioaddr + mii_data);
|
|
writel(value, priv->ioaddr + mii_address);
|
|
|
|
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
|
|
100, 10000))
|
|
return -EBUSY;
|
|
|
|
/* Read the data from the MII data register */
|
|
return readl(priv->ioaddr + mii_data) & MII_DATA_MASK;
|
|
}
|
|
|
|
/**
|
|
* stmmac_mdio_read_c22
|
|
* @bus: points to the mii_bus structure
|
|
* @phyaddr: MII addr
|
|
* @phyreg: MII reg
|
|
* Description: it reads data from the MII register from within the phy device.
|
|
* For the 7111 GMAC, we must set the bit 0 in the MII address register while
|
|
* accessing the PHY registers.
|
|
* Fortunately, it seems this has no drawback for the 7109 MAC.
|
|
*/
|
|
static int stmmac_mdio_read_c22(struct mii_bus *bus, int phyaddr, int phyreg)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
u32 value = MII_BUSY;
|
|
int data = 0;
|
|
|
|
data = pm_runtime_resume_and_get(priv->device);
|
|
if (data < 0)
|
|
return data;
|
|
|
|
value |= (phyaddr << priv->hw->mii.addr_shift)
|
|
& priv->hw->mii.addr_mask;
|
|
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
|
|
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
|
|
& priv->hw->mii.clk_csr_mask;
|
|
if (priv->plat->has_gmac4) {
|
|
value |= MII_GMAC4_READ;
|
|
}
|
|
|
|
data = stmmac_mdio_read(priv, data, value);
|
|
|
|
pm_runtime_put(priv->device);
|
|
|
|
return data;
|
|
}
|
|
|
|
/**
|
|
* stmmac_mdio_read_c45
|
|
* @bus: points to the mii_bus structure
|
|
* @phyaddr: MII addr
|
|
* @devad: device address to read
|
|
* @phyreg: MII reg
|
|
* Description: it reads data from the MII register from within the phy device.
|
|
* For the 7111 GMAC, we must set the bit 0 in the MII address register while
|
|
* accessing the PHY registers.
|
|
* Fortunately, it seems this has no drawback for the 7109 MAC.
|
|
*/
|
|
static int stmmac_mdio_read_c45(struct mii_bus *bus, int phyaddr, int devad,
|
|
int phyreg)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
u32 value = MII_BUSY;
|
|
int data = 0;
|
|
|
|
data = pm_runtime_get_sync(priv->device);
|
|
if (data < 0) {
|
|
pm_runtime_put_noidle(priv->device);
|
|
return data;
|
|
}
|
|
|
|
value |= (phyaddr << priv->hw->mii.addr_shift)
|
|
& priv->hw->mii.addr_mask;
|
|
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
|
|
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
|
|
& priv->hw->mii.clk_csr_mask;
|
|
value |= MII_GMAC4_READ;
|
|
value |= MII_GMAC4_C45E;
|
|
value &= ~priv->hw->mii.reg_mask;
|
|
value |= (devad << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
|
|
|
|
data |= phyreg << MII_GMAC4_REG_ADDR_SHIFT;
|
|
|
|
data = stmmac_mdio_read(priv, data, value);
|
|
|
|
pm_runtime_put(priv->device);
|
|
|
|
return data;
|
|
}
|
|
|
|
static int stmmac_mdio_write(struct stmmac_priv *priv, int data, u32 value)
|
|
{
|
|
unsigned int mii_address = priv->hw->mii.addr;
|
|
unsigned int mii_data = priv->hw->mii.data;
|
|
u32 v;
|
|
|
|
/* Wait until any existing MII operation is complete */
|
|
if (readl_poll_timeout(priv->ioaddr + mii_address, v, !(v & MII_BUSY),
|
|
100, 10000))
|
|
return -EBUSY;
|
|
|
|
/* Set the MII address register to write */
|
|
writel(data, priv->ioaddr + mii_data);
|
|
writel(value, priv->ioaddr + mii_address);
|
|
|
|
/* Wait until any existing MII operation is complete */
|
|
return readl_poll_timeout(priv->ioaddr + mii_address, v,
|
|
!(v & MII_BUSY), 100, 10000);
|
|
}
|
|
|
|
/**
|
|
* stmmac_mdio_write_c22
|
|
* @bus: points to the mii_bus structure
|
|
* @phyaddr: MII addr
|
|
* @phyreg: MII reg
|
|
* @phydata: phy data
|
|
* Description: it writes the data into the MII register from within the device.
|
|
*/
|
|
static int stmmac_mdio_write_c22(struct mii_bus *bus, int phyaddr, int phyreg,
|
|
u16 phydata)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
int ret, data = phydata;
|
|
u32 value = MII_BUSY;
|
|
|
|
ret = pm_runtime_resume_and_get(priv->device);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
value |= (phyaddr << priv->hw->mii.addr_shift)
|
|
& priv->hw->mii.addr_mask;
|
|
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
|
|
|
|
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
|
|
& priv->hw->mii.clk_csr_mask;
|
|
if (priv->plat->has_gmac4)
|
|
value |= MII_GMAC4_WRITE;
|
|
else
|
|
value |= MII_WRITE;
|
|
|
|
ret = stmmac_mdio_write(priv, data, value);
|
|
|
|
pm_runtime_put(priv->device);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* stmmac_mdio_write_c45
|
|
* @bus: points to the mii_bus structure
|
|
* @phyaddr: MII addr
|
|
* @phyreg: MII reg
|
|
* @devad: device address to read
|
|
* @phydata: phy data
|
|
* Description: it writes the data into the MII register from within the device.
|
|
*/
|
|
static int stmmac_mdio_write_c45(struct mii_bus *bus, int phyaddr,
|
|
int devad, int phyreg, u16 phydata)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
int ret, data = phydata;
|
|
u32 value = MII_BUSY;
|
|
|
|
ret = pm_runtime_get_sync(priv->device);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(priv->device);
|
|
return ret;
|
|
}
|
|
|
|
value |= (phyaddr << priv->hw->mii.addr_shift)
|
|
& priv->hw->mii.addr_mask;
|
|
value |= (phyreg << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
|
|
|
|
value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
|
|
& priv->hw->mii.clk_csr_mask;
|
|
|
|
value |= MII_GMAC4_WRITE;
|
|
value |= MII_GMAC4_C45E;
|
|
value &= ~priv->hw->mii.reg_mask;
|
|
value |= (devad << priv->hw->mii.reg_shift) & priv->hw->mii.reg_mask;
|
|
|
|
data |= phyreg << MII_GMAC4_REG_ADDR_SHIFT;
|
|
|
|
ret = stmmac_mdio_write(priv, data, value);
|
|
|
|
pm_runtime_put(priv->device);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* stmmac_mdio_reset
|
|
* @bus: points to the mii_bus structure
|
|
* Description: reset the MII bus
|
|
*/
|
|
int stmmac_mdio_reset(struct mii_bus *bus)
|
|
{
|
|
#if IS_ENABLED(CONFIG_STMMAC_PLATFORM)
|
|
struct net_device *ndev = bus->priv;
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
unsigned int mii_address = priv->hw->mii.addr;
|
|
|
|
#ifdef CONFIG_OF
|
|
if (priv->device->of_node) {
|
|
struct gpio_desc *reset_gpio;
|
|
u32 delays[3] = { 0, 0, 0 };
|
|
|
|
reset_gpio = devm_gpiod_get_optional(priv->device,
|
|
"snps,reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(reset_gpio))
|
|
return PTR_ERR(reset_gpio);
|
|
|
|
device_property_read_u32_array(priv->device,
|
|
"snps,reset-delays-us",
|
|
delays, ARRAY_SIZE(delays));
|
|
|
|
if (delays[0])
|
|
msleep(DIV_ROUND_UP(delays[0], 1000));
|
|
|
|
gpiod_set_value_cansleep(reset_gpio, 1);
|
|
if (delays[1])
|
|
msleep(DIV_ROUND_UP(delays[1], 1000));
|
|
|
|
gpiod_set_value_cansleep(reset_gpio, 0);
|
|
if (delays[2])
|
|
msleep(DIV_ROUND_UP(delays[2], 1000));
|
|
}
|
|
#endif
|
|
|
|
/* This is a workaround for problems with the STE101P PHY.
|
|
* It doesn't complete its reset until at least one clock cycle
|
|
* on MDC, so perform a dummy mdio read. To be updated for GMAC4
|
|
* if needed.
|
|
*/
|
|
if (!priv->plat->has_gmac4)
|
|
writel(0, priv->ioaddr + mii_address);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int stmmac_xpcs_setup(struct mii_bus *bus)
|
|
{
|
|
struct net_device *ndev = bus->priv;
|
|
struct mdio_device *mdiodev;
|
|
struct stmmac_priv *priv;
|
|
struct dw_xpcs *xpcs;
|
|
int mode, addr;
|
|
|
|
priv = netdev_priv(ndev);
|
|
mode = priv->plat->phy_interface;
|
|
|
|
/* Try to probe the XPCS by scanning all addresses. */
|
|
for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
|
|
mdiodev = mdio_device_create(bus, addr);
|
|
if (IS_ERR(mdiodev))
|
|
continue;
|
|
|
|
xpcs = xpcs_create(mdiodev, mode);
|
|
if (IS_ERR_OR_NULL(xpcs)) {
|
|
mdio_device_free(mdiodev);
|
|
continue;
|
|
}
|
|
|
|
priv->hw->xpcs = xpcs;
|
|
break;
|
|
}
|
|
|
|
if (!priv->hw->xpcs) {
|
|
dev_warn(priv->device, "No xPCS found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* stmmac_mdio_register
|
|
* @ndev: net device structure
|
|
* Description: it registers the MII bus
|
|
*/
|
|
int stmmac_mdio_register(struct net_device *ndev)
|
|
{
|
|
int err = 0;
|
|
struct mii_bus *new_bus;
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
|
|
struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
|
|
struct device_node *mdio_node = priv->plat->mdio_node;
|
|
struct device *dev = ndev->dev.parent;
|
|
struct fwnode_handle *fixed_node;
|
|
int addr, found, max_addr;
|
|
|
|
if (!mdio_bus_data)
|
|
return 0;
|
|
|
|
new_bus = mdiobus_alloc();
|
|
if (!new_bus)
|
|
return -ENOMEM;
|
|
|
|
if (mdio_bus_data->irqs)
|
|
memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));
|
|
|
|
new_bus->name = "stmmac";
|
|
|
|
if (priv->plat->has_xgmac) {
|
|
new_bus->read = &stmmac_xgmac2_mdio_read_c22;
|
|
new_bus->write = &stmmac_xgmac2_mdio_write_c22;
|
|
new_bus->read_c45 = &stmmac_xgmac2_mdio_read_c45;
|
|
new_bus->write_c45 = &stmmac_xgmac2_mdio_write_c45;
|
|
|
|
/* Right now only C22 phys are supported */
|
|
max_addr = MII_XGMAC_MAX_C22ADDR + 1;
|
|
|
|
/* Check if DT specified an unsupported phy addr */
|
|
if (priv->plat->phy_addr > MII_XGMAC_MAX_C22ADDR)
|
|
dev_err(dev, "Unsupported phy_addr (max=%d)\n",
|
|
MII_XGMAC_MAX_C22ADDR);
|
|
} else {
|
|
new_bus->read = &stmmac_mdio_read_c22;
|
|
new_bus->write = &stmmac_mdio_write_c22;
|
|
if (priv->plat->has_gmac4) {
|
|
new_bus->read_c45 = &stmmac_mdio_read_c45;
|
|
new_bus->write_c45 = &stmmac_mdio_write_c45;
|
|
}
|
|
|
|
max_addr = PHY_MAX_ADDR;
|
|
}
|
|
|
|
if (mdio_bus_data->needs_reset)
|
|
new_bus->reset = &stmmac_mdio_reset;
|
|
|
|
snprintf(new_bus->id, MII_BUS_ID_SIZE, "%s-%x",
|
|
new_bus->name, priv->plat->bus_id);
|
|
new_bus->priv = ndev;
|
|
new_bus->phy_mask = mdio_bus_data->phy_mask;
|
|
new_bus->parent = priv->device;
|
|
|
|
err = of_mdiobus_register(new_bus, mdio_node);
|
|
if (err != 0) {
|
|
dev_err_probe(dev, err, "Cannot register the MDIO bus\n");
|
|
goto bus_register_fail;
|
|
}
|
|
|
|
/* Looks like we need a dummy read for XGMAC only and C45 PHYs */
|
|
if (priv->plat->has_xgmac)
|
|
stmmac_xgmac2_mdio_read_c45(new_bus, 0, 0, 0);
|
|
|
|
/* If fixed-link is set, skip PHY scanning */
|
|
if (!fwnode)
|
|
fwnode = dev_fwnode(priv->device);
|
|
|
|
if (fwnode) {
|
|
fixed_node = fwnode_get_named_child_node(fwnode, "fixed-link");
|
|
if (fixed_node) {
|
|
fwnode_handle_put(fixed_node);
|
|
goto bus_register_done;
|
|
}
|
|
}
|
|
|
|
if (priv->plat->phy_node || mdio_node)
|
|
goto bus_register_done;
|
|
|
|
found = 0;
|
|
for (addr = 0; addr < max_addr; addr++) {
|
|
struct phy_device *phydev = mdiobus_get_phy(new_bus, addr);
|
|
|
|
if (!phydev)
|
|
continue;
|
|
|
|
/*
|
|
* If an IRQ was provided to be assigned after
|
|
* the bus probe, do it here.
|
|
*/
|
|
if (!mdio_bus_data->irqs &&
|
|
(mdio_bus_data->probed_phy_irq > 0)) {
|
|
new_bus->irq[addr] = mdio_bus_data->probed_phy_irq;
|
|
phydev->irq = mdio_bus_data->probed_phy_irq;
|
|
}
|
|
|
|
/*
|
|
* If we're going to bind the MAC to this PHY bus,
|
|
* and no PHY number was provided to the MAC,
|
|
* use the one probed here.
|
|
*/
|
|
if (priv->plat->phy_addr == -1)
|
|
priv->plat->phy_addr = addr;
|
|
|
|
phy_attached_info(phydev);
|
|
found = 1;
|
|
}
|
|
|
|
if (!found && !mdio_node) {
|
|
dev_warn(dev, "No PHY found\n");
|
|
err = -ENODEV;
|
|
goto no_phy_found;
|
|
}
|
|
|
|
bus_register_done:
|
|
priv->mii = new_bus;
|
|
|
|
return 0;
|
|
|
|
no_phy_found:
|
|
mdiobus_unregister(new_bus);
|
|
bus_register_fail:
|
|
mdiobus_free(new_bus);
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* stmmac_mdio_unregister
|
|
* @ndev: net device structure
|
|
* Description: it unregisters the MII bus
|
|
*/
|
|
int stmmac_mdio_unregister(struct net_device *ndev)
|
|
{
|
|
struct stmmac_priv *priv = netdev_priv(ndev);
|
|
|
|
if (!priv->mii)
|
|
return 0;
|
|
|
|
if (priv->hw->xpcs) {
|
|
mdio_device_free(priv->hw->xpcs->mdiodev);
|
|
xpcs_destroy(priv->hw->xpcs);
|
|
}
|
|
|
|
mdiobus_unregister(priv->mii);
|
|
priv->mii->priv = NULL;
|
|
mdiobus_free(priv->mii);
|
|
priv->mii = NULL;
|
|
|
|
return 0;
|
|
}
|