linux-zen-server/drivers/net/wireless/ath/ath11k/ce.h

214 lines
5.9 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
*/
#ifndef ATH11K_CE_H
#define ATH11K_CE_H
#define CE_COUNT_MAX 12
/* Byte swap data words */
#define CE_ATTR_BYTE_SWAP_DATA 2
/* no interrupt on copy completion */
#define CE_ATTR_DIS_INTR 8
/* Host software's Copy Engine configuration. */
#ifdef __BIG_ENDIAN
#define CE_ATTR_FLAGS CE_ATTR_BYTE_SWAP_DATA
#else
#define CE_ATTR_FLAGS 0
#endif
/* Threshold to poll for tx completion in case of Interrupt disabled CE's */
#define ATH11K_CE_USAGE_THRESHOLD 32
void ath11k_ce_byte_swap(void *mem, u32 len);
/*
* Directions for interconnect pipe configuration.
* These definitions may be used during configuration and are shared
* between Host and Target.
*
* Pipe Directions are relative to the Host, so PIPEDIR_IN means
* "coming IN over air through Target to Host" as with a WiFi Rx operation.
* Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air"
* as with a WiFi Tx operation. This is somewhat awkward for the "middle-man"
* Target since things that are "PIPEDIR_OUT" are coming IN to the Target
* over the interconnect.
*/
#define PIPEDIR_NONE 0
#define PIPEDIR_IN 1 /* Target-->Host, WiFi Rx direction */
#define PIPEDIR_OUT 2 /* Host->Target, WiFi Tx direction */
#define PIPEDIR_INOUT 3 /* bidirectional */
#define PIPEDIR_INOUT_H2H 4 /* bidirectional, host to host */
/* CE address/mask */
#define CE_HOST_IE_ADDRESS 0x00A1803C
#define CE_HOST_IE_2_ADDRESS 0x00A18040
#define CE_HOST_IE_3_ADDRESS CE_HOST_IE_ADDRESS
/* CE IE registers are different for IPQ5018 */
#define CE_HOST_IPQ5018_IE_ADDRESS 0x0841804C
#define CE_HOST_IPQ5018_IE_2_ADDRESS 0x08418050
#define CE_HOST_IPQ5018_IE_3_ADDRESS CE_HOST_IPQ5018_IE_ADDRESS
#define CE_HOST_IE_3_SHIFT 0xC
#define CE_RING_IDX_INCR(nentries_mask, idx) (((idx) + 1) & (nentries_mask))
#define ATH11K_CE_RX_POST_RETRY_JIFFIES 50
struct ath11k_base;
/*
* Establish a mapping between a service/direction and a pipe.
* Configuration information for a Copy Engine pipe and services.
* Passed from Host to Target through QMI message and must be in
* little endian format.
*/
struct service_to_pipe {
__le32 service_id;
__le32 pipedir;
__le32 pipenum;
};
/*
* Configuration information for a Copy Engine pipe.
* Passed from Host to Target through QMI message during startup (one per CE).
*
* NOTE: Structure is shared between Host software and Target firmware!
*/
struct ce_pipe_config {
__le32 pipenum;
__le32 pipedir;
__le32 nentries;
__le32 nbytes_max;
__le32 flags;
__le32 reserved;
};
struct ce_ie_addr {
u32 ie1_reg_addr;
u32 ie2_reg_addr;
u32 ie3_reg_addr;
};
struct ce_remap {
u32 base;
u32 size;
};
struct ce_attr {
/* CE_ATTR_* values */
unsigned int flags;
/* #entries in source ring - Must be a power of 2 */
unsigned int src_nentries;
/*
* Max source send size for this CE.
* This is also the minimum size of a destination buffer.
*/
unsigned int src_sz_max;
/* #entries in destination ring - Must be a power of 2 */
unsigned int dest_nentries;
void (*recv_cb)(struct ath11k_base *, struct sk_buff *);
void (*send_cb)(struct ath11k_base *, struct sk_buff *);
};
#define CE_DESC_RING_ALIGN 8
struct ath11k_ce_ring {
/* Number of entries in this ring; must be power of 2 */
unsigned int nentries;
unsigned int nentries_mask;
/* For dest ring, this is the next index to be processed
* by software after it was/is received into.
*
* For src ring, this is the last descriptor that was sent
* and completion processed by software.
*
* Regardless of src or dest ring, this is an invariant
* (modulo ring size):
* write index >= read index >= sw_index
*/
unsigned int sw_index;
/* cached copy */
unsigned int write_index;
/* Start of DMA-coherent area reserved for descriptors */
/* Host address space */
void *base_addr_owner_space_unaligned;
/* CE address space */
u32 base_addr_ce_space_unaligned;
/* Actual start of descriptors.
* Aligned to descriptor-size boundary.
* Points into reserved DMA-coherent area, above.
*/
/* Host address space */
void *base_addr_owner_space;
/* CE address space */
u32 base_addr_ce_space;
/* HAL ring id */
u32 hal_ring_id;
/* keep last */
struct sk_buff *skb[];
};
struct ath11k_ce_pipe {
struct ath11k_base *ab;
u16 pipe_num;
unsigned int attr_flags;
unsigned int buf_sz;
unsigned int rx_buf_needed;
void (*send_cb)(struct ath11k_base *, struct sk_buff *);
void (*recv_cb)(struct ath11k_base *, struct sk_buff *);
struct tasklet_struct intr_tq;
struct ath11k_ce_ring *src_ring;
struct ath11k_ce_ring *dest_ring;
struct ath11k_ce_ring *status_ring;
u64 timestamp;
};
struct ath11k_ce {
struct ath11k_ce_pipe ce_pipe[CE_COUNT_MAX];
/* Protects rings of all ce pipes */
spinlock_t ce_lock;
struct ath11k_hp_update_timer hp_timer[CE_COUNT_MAX];
};
extern const struct ce_attr ath11k_host_ce_config_ipq8074[];
extern const struct ce_attr ath11k_host_ce_config_qca6390[];
extern const struct ce_attr ath11k_host_ce_config_qcn9074[];
void ath11k_ce_cleanup_pipes(struct ath11k_base *ab);
void ath11k_ce_rx_replenish_retry(struct timer_list *t);
void ath11k_ce_per_engine_service(struct ath11k_base *ab, u16 ce_id);
int ath11k_ce_send(struct ath11k_base *ab, struct sk_buff *skb, u8 pipe_id,
u16 transfer_id);
void ath11k_ce_rx_post_buf(struct ath11k_base *ab);
int ath11k_ce_init_pipes(struct ath11k_base *ab);
int ath11k_ce_alloc_pipes(struct ath11k_base *ab);
void ath11k_ce_free_pipes(struct ath11k_base *ab);
int ath11k_ce_get_attr_flags(struct ath11k_base *ab, int ce_id);
void ath11k_ce_poll_send_completed(struct ath11k_base *ab, u8 pipe_id);
int ath11k_ce_map_service_to_pipe(struct ath11k_base *ab, u16 service_id,
u8 *ul_pipe, u8 *dl_pipe);
int ath11k_ce_attr_attach(struct ath11k_base *ab);
void ath11k_ce_get_shadow_config(struct ath11k_base *ab,
u32 **shadow_cfg, u32 *shadow_cfg_len);
void ath11k_ce_stop_shadow_timers(struct ath11k_base *ab);
#endif