kvj
/
linux-zen-server
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-server/drivers/net/wireless/ath/wil6210/txrx_edma.h

603 lines
18 KiB
C
Raw Blame History

/* SPDX-License-Identifier: ISC */
/*
* Copyright (c) 2012-2016,2018-2019, The Linux Foundation. All rights reserved.
*/
#ifndef WIL6210_TXRX_EDMA_H
#define WIL6210_TXRX_EDMA_H
#include "wil6210.h"
/* limit status ring size in range [ring size..max ring size] */
#define WIL_SRING_SIZE_ORDER_MIN (WIL_RING_SIZE_ORDER_MIN)
#define WIL_SRING_SIZE_ORDER_MAX (WIL_RING_SIZE_ORDER_MAX)
/* RX sring order should be bigger than RX ring order */
#define WIL_RX_SRING_SIZE_ORDER_DEFAULT (12)
#define WIL_TX_SRING_SIZE_ORDER_DEFAULT (14)
#define WIL_RX_BUFF_ARR_SIZE_DEFAULT (2600)
#define WIL_DEFAULT_RX_STATUS_RING_ID 0
#define WIL_RX_DESC_RING_ID 0
#define WIL_RX_STATUS_IRQ_IDX 0
#define WIL_TX_STATUS_IRQ_IDX 1
#define WIL_EDMA_AGG_WATERMARK (0xffff)
#define WIL_EDMA_AGG_WATERMARK_POS (16)
#define WIL_EDMA_IDLE_TIME_LIMIT_USEC (50)
#define WIL_EDMA_TIME_UNIT_CLK_CYCLES (330) /* fits 1 usec */
/* Error field */
#define WIL_RX_EDMA_ERROR_MIC (1)
#define WIL_RX_EDMA_ERROR_KEY (2) /* Key missing */
#define WIL_RX_EDMA_ERROR_REPLAY (3)
#define WIL_RX_EDMA_ERROR_AMSDU (4)
#define WIL_RX_EDMA_ERROR_FCS (7)
#define WIL_RX_EDMA_ERROR_L3_ERR (BIT(0) | BIT(1))
#define WIL_RX_EDMA_ERROR_L4_ERR (BIT(0) | BIT(1))
#define WIL_RX_EDMA_DLPF_LU_MISS_BIT BIT(11)
#define WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK 0x7
#define WIL_RX_EDMA_DLPF_LU_HIT_CID_TID_MASK 0xf
#define WIL_RX_EDMA_DLPF_LU_MISS_CID_POS 2
#define WIL_RX_EDMA_DLPF_LU_HIT_CID_POS 4
#define WIL_RX_EDMA_DLPF_LU_MISS_TID_POS 5
#define WIL_RX_EDMA_MID_VALID_BIT BIT(20)
#define WIL_EDMA_DESC_TX_MAC_CFG_0_QID_POS 16
#define WIL_EDMA_DESC_TX_MAC_CFG_0_QID_LEN 6
#define WIL_EDMA_DESC_TX_CFG_EOP_POS 0
#define WIL_EDMA_DESC_TX_CFG_EOP_LEN 1
#define WIL_EDMA_DESC_TX_CFG_TSO_DESC_TYPE_POS 3
#define WIL_EDMA_DESC_TX_CFG_TSO_DESC_TYPE_LEN 2
#define WIL_EDMA_DESC_TX_CFG_SEG_EN_POS 5
#define WIL_EDMA_DESC_TX_CFG_SEG_EN_LEN 1
#define WIL_EDMA_DESC_TX_CFG_INSERT_IP_CHKSUM_POS 6
#define WIL_EDMA_DESC_TX_CFG_INSERT_IP_CHKSUM_LEN 1
#define WIL_EDMA_DESC_TX_CFG_INSERT_TCP_CHKSUM_POS 7
#define WIL_EDMA_DESC_TX_CFG_INSERT_TCP_CHKSUM_LEN 1
#define WIL_EDMA_DESC_TX_CFG_L4_TYPE_POS 15
#define WIL_EDMA_DESC_TX_CFG_L4_TYPE_LEN 1
#define WIL_EDMA_DESC_TX_CFG_PSEUDO_HEADER_CALC_EN_POS 5
#define WIL_EDMA_DESC_TX_CFG_PSEUDO_HEADER_CALC_EN_LEN 1
/* Enhanced Rx descriptor - MAC part
* [dword 0] : Reserved
* [dword 1] : Reserved
* [dword 2] : Reserved
* [dword 3]
* bit 0..15 : Buffer ID
* bit 16..31 : Reserved
*/
struct wil_ring_rx_enhanced_mac {
u32 d[3];
__le16 buff_id;
u16 reserved;
} __packed;
/* Enhanced Rx descriptor - DMA part
* [dword 0] - Reserved
* [dword 1]
* bit 0..31 : addr_low:32 The payload buffer address, bits 0-31
* [dword 2]
* bit 0..15 : addr_high_low:16 The payload buffer address, bits 32-47
* bit 16..31 : Reserved
* [dword 3]
* bit 0..15 : addr_high_high:16 The payload buffer address, bits 48-63
* bit 16..31 : length
*/
struct wil_ring_rx_enhanced_dma {
u32 d0;
struct wil_ring_dma_addr addr;
u16 w5;
__le16 addr_high_high;
__le16 length;
} __packed;
struct wil_rx_enhanced_desc {
struct wil_ring_rx_enhanced_mac mac;
struct wil_ring_rx_enhanced_dma dma;
} __packed;
/* Enhanced Tx descriptor - DMA part
* [dword 0]
* Same as legacy
* [dword 1]
* bit 0..31 : addr_low:32 The payload buffer address, bits 0-31
* [dword 2]
* bit 0..15 : addr_high_low:16 The payload buffer address, bits 32-47
* bit 16..23 : ip_length:8 The IP header length for the TX IP checksum
* offload feature
* bit 24..30 : mac_length:7
* bit 31 : ip_version:1 1 - IPv4, 0 - IPv6
* [dword 3]
* bit 0..15 : addr_high_high:16 The payload buffer address, bits 48-63
* bit 16..31 : length
*/
struct wil_ring_tx_enhanced_dma {
u8 l4_hdr_len;
u8 cmd;
u16 w1;
struct wil_ring_dma_addr addr;
u8 ip_length;
u8 b11; /* 0..6: mac_length; 7:ip_version */
__le16 addr_high_high;
__le16 length;
} __packed;
/* Enhanced Tx descriptor - MAC part
* [dword 0]
* bit 0.. 9 : lifetime_expiry_value:10
* bit 10 : interrupt_en:1
* bit 11 : status_en:1
* bit 12..13 : txss_override:2
* bit 14 : timestamp_insertion:1
* bit 15 : duration_preserve:1
* bit 16..21 : reserved0:6
* bit 22..26 : mcs_index:5
* bit 27 : mcs_en:1
* bit 28..30 : reserved1:3
* bit 31 : sn_preserved:1
* [dword 1]
* bit 0.. 3 : pkt_mode:4
* bit 4 : pkt_mode_en:1
* bit 5..14 : reserved0:10
* bit 15 : ack_policy_en:1
* bit 16..19 : dst_index:4
* bit 20 : dst_index_en:1
* bit 21..22 : ack_policy:2
* bit 23 : lifetime_en:1
* bit 24..30 : max_retry:7
* bit 31 : max_retry_en:1
* [dword 2]
* bit 0.. 7 : num_of_descriptors:8
* bit 8..17 : reserved:10
* bit 18..19 : l2_translation_type:2 00 - bypass, 01 - 802.3, 10 - 802.11
* bit 20 : snap_hdr_insertion_en:1
* bit 21 : vlan_removal_en:1
* bit 22..23 : reserved0:2
* bit 24 : Dest ID extension:1
* bit 25..31 : reserved0:7
* [dword 3]
* bit 0..15 : tso_mss:16
* bit 16..31 : descriptor_scratchpad:16 - mailbox between driver and ucode
*/
struct wil_ring_tx_enhanced_mac {
u32 d[3];
__le16 tso_mss;
u16 scratchpad;
} __packed;
struct wil_tx_enhanced_desc {
struct wil_ring_tx_enhanced_mac mac;
struct wil_ring_tx_enhanced_dma dma;
} __packed;
#define TX_STATUS_DESC_READY_POS 7
/* Enhanced TX status message
* [dword 0]
* bit 0.. 7 : Number of Descriptor:8 - The number of descriptors that
* are used to form the packets. It is needed for WB when
* releasing the packet
* bit 8..15 : tx_ring_id:8 The transmission ring ID that is related to
* the message
* bit 16..23 : Status:8 - The TX status Code
* 0x0 - A successful transmission
* 0x1 - Retry expired
* 0x2 - Lifetime Expired
* 0x3 - Released
* 0x4-0xFF - Reserved
* bit 24..30 : Reserved:7
* bit 31 : Descriptor Ready bit:1 - It is initiated to
* zero by the driver when the ring is created. It is set by the HW
* to one for each completed status message. Each wrap around,
* the DR bit value is flipped.
* [dword 1]
* bit 0..31 : timestamp:32 - Set when MPDU is transmitted.
* [dword 2]
* bit 0.. 4 : MCS:5 - The transmitted MCS value
* bit 5 : Reserved:1
* bit 6.. 7 : CB mode:2 - 0-DMG 1-EDMG 2-Wide
* bit 8..12 : QID:5 - The QID that was used for the transmission
* bit 13..15 : Reserved:3
* bit 16..20 : Num of MSDUs:5 - Number of MSDUs in the aggregation
* bit 21..22 : Reserved:2
* bit 23 : Retry:1 - An indication that the transmission was retried
* bit 24..31 : TX-Sector:8 - the antenna sector that was used for
* transmission
* [dword 3]
* bit 0..11 : Sequence number:12 - The Sequence Number that was used
* for the MPDU transmission
* bit 12..31 : Reserved:20
*/
struct wil_ring_tx_status {
u8 num_descriptors;
u8 ring_id;
u8 status;
u8 desc_ready; /* Only the last bit should be set */
u32 timestamp;
u32 d2;
u16 seq_number; /* Only the first 12 bits */
u16 w7;
} __packed;
/* Enhanced Rx status message - compressed part
* [dword 0]
* bit 0.. 2 : L2 Rx Status:3 - The L2 packet reception Status
* 0-Success, 1-MIC Error, 2-Key Error, 3-Replay Error,
* 4-A-MSDU Error, 5-Reserved, 6-Reserved, 7-FCS Error
* bit 3.. 4 : L3 Rx Status:2 - Bit0 - L3I - L3 identified and checksum
* calculated, Bit1- L3Err - IPv4 Checksum Error
* bit 5.. 6 : L4 Rx Status:2 - Bit0 - L4I - L4 identified and checksum
* calculated, Bit1- L4Err - TCP/UDP Checksum Error
* bit 7 : Reserved:1
* bit 8..19 : Flow ID:12 - MSDU flow ID
* bit 20 : MID_V:1 - The MAC ID field is valid
* bit 21..22 : MID:2 - The MAC ID
* bit 23 : L3T:1 - IP types: 0-IPv6, 1-IPv4
* bit 24 : L4T:1 - Layer 4 Type: 0-UDP, 1-TCP
* bit 25 : BC:1 - The received MPDU is broadcast
* bit 26 : MC:1 - The received MPDU is multicast
* bit 27 : Raw:1 - The MPDU received with no translation
* bit 28 : Sec:1 - The FC control (b14) - Frame Protected
* bit 29 : Error:1 - An error is set when (L2 status != 0) ||
* (L3 status == 3) || (L4 status == 3)
* bit 30 : EOP:1 - End of MSDU signaling. It is set to mark the end
* of the transfer, otherwise the status indicates buffer
* only completion.
* bit 31 : Descriptor Ready bit:1 - It is initiated to
* zero by the driver when the ring is created. It is set
* by the HW to one for each completed status message.
* Each wrap around, the DR bit value is flipped.
* [dword 1]
* bit 0.. 5 : MAC Len:6 - The number of bytes that are used for L2 header
* bit 6..11 : IPLEN:6 - The number of DW that are used for L3 header
* bit 12..15 : I4Len:4 - The number of DW that are used for L4 header
* bit 16..21 : MCS:6 - The received MCS field from the PLCP Header
* bit 22..23 : CB mode:2 - The CB Mode: 0-DMG, 1-EDMG, 2-Wide
* bit 24..27 : Data Offset:4 - The data offset, a code that describe the
* payload shift from the beginning of the buffer:
* 0 - 0 Bytes, 3 - 2 Bytes
* bit 28 : A-MSDU Present:1 - The QoS (b7) A-MSDU present field
* bit 29 : A-MSDU Type:1 The QoS (b8) A-MSDU Type field
* bit 30 : A-MPDU:1 - Packet is part of aggregated MPDU
* bit 31 : Key ID:1 - The extracted Key ID from the encryption header
* [dword 2]
* bit 0..15 : Buffer ID:16 - The Buffer Identifier
* bit 16..31 : Length:16 - It indicates the valid bytes that are stored
* in the current descriptor buffer. For multiple buffer
* descriptor, SW need to sum the total descriptor length
* in all buffers to produce the packet length
* [dword 3]
* bit 0..31 : timestamp:32 - The MPDU Timestamp.
*/
struct wil_rx_status_compressed {
u32 d0;
u32 d1;
__le16 buff_id;
__le16 length;
u32 timestamp;
} __packed;
/* Enhanced Rx status message - extension part
* [dword 0]
* bit 0.. 4 : QID:5 - The Queue Identifier that the packet is received
* from
* bit 5.. 7 : Reserved:3
* bit 8..11 : TID:4 - The QoS (b3-0) TID Field
* bit 12..15 Source index:4 - The Source index that was found
during Parsing the TA. This field is used to define the
source of the packet
* bit 16..18 : Destination index:3 - The Destination index that
was found during Parsing the RA.
* bit 19..20 : DS Type:2 - The FC Control (b9-8) - From / To DS
* bit 21..22 : MIC ICR:2 - this signal tells the DMA to assert an
interrupt after it writes the packet
* bit 23 : ESOP:1 - The QoS (b4) ESOP field
* bit 24 : RDG:1
* bit 25..31 : Reserved:7
* [dword 1]
* bit 0.. 1 : Frame Type:2 - The FC Control (b3-2) - MPDU Type
(management, data, control and extension)
* bit 2.. 5 : Syb type:4 - The FC Control (b7-4) - Frame Subtype
* bit 6..11 : Ext sub type:6 - The FC Control (b11-8) - Frame Extended
* Subtype
* bit 12..13 : ACK Policy:2 - The QoS (b6-5) ACK Policy fields
* bit 14 : DECRYPT_BYP:1 - The MPDU is bypass by the decryption unit
* bit 15..23 : Reserved:9
* bit 24..31 : RSSI/SNR:8 - The RSSI / SNR measurement for the received
* MPDU
* [dword 2]
* bit 0..11 : SN:12 - The received Sequence number field
* bit 12..15 : Reserved:4
* bit 16..31 : PN bits [15:0]:16
* [dword 3]
* bit 0..31 : PN bits [47:16]:32
*/
struct wil_rx_status_extension {
u32 d0;
u32 d1;
__le16 seq_num; /* only lower 12 bits */
u16 pn_15_0;
u32 pn_47_16;
} __packed;
struct wil_rx_status_extended {
struct wil_rx_status_compressed comp;
struct wil_rx_status_extension ext;
} __packed;
static inline void *wil_skb_rxstatus(struct sk_buff *skb)
{
return (void *)skb->cb;
}
static inline __le16 wil_rx_status_get_length(void *msg)
{
return ((struct wil_rx_status_compressed *)msg)->length;
}
static inline u8 wil_rx_status_get_mcs(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
16, 21);
}
static inline u8 wil_rx_status_get_cb_mode(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
22, 23);
}
static inline u16 wil_rx_status_get_flow_id(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
8, 19);
}
static inline u8 wil_rx_status_get_mcast(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
26, 26);
}
/**
* In case of DLPF miss the parsing of flow Id should be as follows:
* dest_id:2
* src_id :3 - cid
* tid:3
* Otherwise:
* tid:4
* cid:4
*/
static inline u8 wil_rx_status_get_cid(void *msg)
{
u16 val = wil_rx_status_get_flow_id(msg);
if (val & WIL_RX_EDMA_DLPF_LU_MISS_BIT)
/* CID is in bits 2..4 */
return (val >> WIL_RX_EDMA_DLPF_LU_MISS_CID_POS) &
WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK;
else
/* CID is in bits 4..7 */
return (val >> WIL_RX_EDMA_DLPF_LU_HIT_CID_POS) &
WIL_RX_EDMA_DLPF_LU_HIT_CID_TID_MASK;
}
static inline u8 wil_rx_status_get_tid(void *msg)
{
u16 val = wil_rx_status_get_flow_id(msg);
if (val & WIL_RX_EDMA_DLPF_LU_MISS_BIT)
/* TID is in bits 5..7 */
return (val >> WIL_RX_EDMA_DLPF_LU_MISS_TID_POS) &
WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK;
else
/* TID is in bits 0..3 */
return val & WIL_RX_EDMA_DLPF_LU_MISS_CID_TID_MASK;
}
static inline int wil_rx_status_get_eop(void *msg) /* EoP = End of Packet */
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
30, 30);
}
static inline void wil_rx_status_reset_buff_id(struct wil_status_ring *s)
{
((struct wil_rx_status_compressed *)
(s->va + (s->elem_size * s->swhead)))->buff_id = 0;
}
static inline __le16 wil_rx_status_get_buff_id(void *msg)
{
return ((struct wil_rx_status_compressed *)msg)->buff_id;
}
static inline u8 wil_rx_status_get_data_offset(void *msg)
{
u8 val = WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
24, 27);
switch (val) {
case 0: return 0;
case 3: return 2;
default: return 0xFF;
}
}
static inline int wil_rx_status_get_frame_type(struct wil6210_priv *wil,
void *msg)
{
if (wil->use_compressed_rx_status)
return IEEE80211_FTYPE_DATA;
return WIL_GET_BITS(((struct wil_rx_status_extended *)msg)->ext.d1,
0, 1) << 2;
}
static inline int wil_rx_status_get_fc1(struct wil6210_priv *wil, void *msg)
{
if (wil->use_compressed_rx_status)
return 0;
return WIL_GET_BITS(((struct wil_rx_status_extended *)msg)->ext.d1,
0, 5) << 2;
}
static inline __le16 wil_rx_status_get_seq(struct wil6210_priv *wil, void *msg)
{
if (wil->use_compressed_rx_status)
return 0;
return ((struct wil_rx_status_extended *)msg)->ext.seq_num;
}
static inline u8 wil_rx_status_get_retry(void *msg)
{
/* retry bit is missing in EDMA HW. return 1 to be on the safe side */
return 1;
}
static inline int wil_rx_status_get_mid(void *msg)
{
if (!(((struct wil_rx_status_compressed *)msg)->d0 &
WIL_RX_EDMA_MID_VALID_BIT))
return 0; /* use the default MID */
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
21, 22);
}
static inline int wil_rx_status_get_error(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
29, 29);
}
static inline int wil_rx_status_get_l2_rx_status(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
0, 2);
}
static inline int wil_rx_status_get_l3_rx_status(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
3, 4);
}
static inline int wil_rx_status_get_l4_rx_status(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
5, 6);
}
/* L4 L3 Expected result
* 0 0 Ok. No L3 and no L4 known protocols found.
* Treated as L2 packet. (no offloads on this packet)
* 0 1 Ok. It means that L3 was found, and checksum check passed.
* No known L4 protocol was found.
* 0 2 It means that L3 protocol was found, and checksum check failed.
* No L4 known protocol was found.
* 1 any Ok. It means that L4 was found, and checksum check passed.
* 3 0 Not a possible scenario.
* 3 1 Recalculate. It means that L3 protocol was found, and checksum
* passed. But L4 checksum failed. Need to see if really failed,
* or due to fragmentation.
* 3 2 Both L3 and L4 checksum check failed.
*/
static inline int wil_rx_status_get_checksum(void *msg,
struct wil_net_stats *stats)
{
int l3_rx_status = wil_rx_status_get_l3_rx_status(msg);
int l4_rx_status = wil_rx_status_get_l4_rx_status(msg);
if (l4_rx_status == 1)
return CHECKSUM_UNNECESSARY;
if (l4_rx_status == 0 && l3_rx_status == 1)
return CHECKSUM_UNNECESSARY;
if (l3_rx_status == 0 && l4_rx_status == 0)
/* L2 packet */
return CHECKSUM_NONE;
/* If HW reports bad checksum, let IP stack re-check it
* For example, HW doesn't understand Microsoft IP stack that
* mis-calculates TCP checksum - if it should be 0x0,
* it writes 0xffff in violation of RFC 1624
*/
stats->rx_csum_err++;
return CHECKSUM_NONE;
}
static inline int wil_rx_status_get_security(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
28, 28);
}
static inline u8 wil_rx_status_get_key_id(void *msg)
{
return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
31, 31);
}
static inline u8 wil_tx_status_get_mcs(struct wil_ring_tx_status *msg)
{
return WIL_GET_BITS(msg->d2, 0, 4);
}
static inline u32 wil_ring_next_head(struct wil_ring *ring)
{
return (ring->swhead + 1) % ring->size;
}
static inline void wil_desc_set_addr_edma(struct wil_ring_dma_addr *addr,
__le16 *addr_high_high,
dma_addr_t pa)
{
addr->addr_low = cpu_to_le32(lower_32_bits(pa));
addr->addr_high = cpu_to_le16((u16)upper_32_bits(pa));
*addr_high_high = cpu_to_le16((u16)(upper_32_bits(pa) >> 16));
}
static inline
dma_addr_t wil_tx_desc_get_addr_edma(struct wil_ring_tx_enhanced_dma *dma)
{
return le32_to_cpu(dma->addr.addr_low) |
((u64)le16_to_cpu(dma->addr.addr_high) << 32) |
((u64)le16_to_cpu(dma->addr_high_high) << 48);
}
static inline
dma_addr_t wil_rx_desc_get_addr_edma(struct wil_ring_rx_enhanced_dma *dma)
{
return le32_to_cpu(dma->addr.addr_low) |
((u64)le16_to_cpu(dma->addr.addr_high) << 32) |
((u64)le16_to_cpu(dma->addr_high_high) << 48);
}
void wil_configure_interrupt_moderation_edma(struct wil6210_priv *wil);
int wil_tx_sring_handler(struct wil6210_priv *wil,
struct wil_status_ring *sring);
void wil_rx_handle_edma(struct wil6210_priv *wil, int *quota);
void wil_init_txrx_ops_edma(struct wil6210_priv *wil);
#endif /* WIL6210_TXRX_EDMA_H */
Reference in New Issue View Git Blame Copy Permalink