909 lines
21 KiB
C
909 lines
21 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Based on drivers/serial/8250.c by Russell King.
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Feb 20, 2003
|
|
* Copyright: (C) 2003 Monta Vista Software, Inc.
|
|
*
|
|
* Note 1: This driver is made separate from the already too overloaded
|
|
* 8250.c because it needs some kirks of its own and that'll make it
|
|
* easier to add DMA support.
|
|
*
|
|
* Note 2: I'm too sick of device allocation policies for serial ports.
|
|
* If someone else wants to request an "official" allocation of major/minor
|
|
* for this driver please be my guest. And don't forget that new hardware
|
|
* to come from Intel might have more than 3 or 4 of those UARTs. Let's
|
|
* hope for a better port registration and dynamic device allocation scheme
|
|
* with the serial core maintainer satisfaction to appear soon.
|
|
*/
|
|
|
|
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/circ_buf.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define PXA_NAME_LEN 8
|
|
|
|
struct uart_pxa_port {
|
|
struct uart_port port;
|
|
unsigned char ier;
|
|
unsigned char lcr;
|
|
unsigned char mcr;
|
|
unsigned int lsr_break_flag;
|
|
struct clk *clk;
|
|
char name[PXA_NAME_LEN];
|
|
};
|
|
|
|
static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
|
|
{
|
|
offset <<= 2;
|
|
return readl(up->port.membase + offset);
|
|
}
|
|
|
|
static inline void serial_out(struct uart_pxa_port *up, int offset, int value)
|
|
{
|
|
offset <<= 2;
|
|
writel(value, up->port.membase + offset);
|
|
}
|
|
|
|
static void serial_pxa_enable_ms(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
up->ier |= UART_IER_MSI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
|
|
static void serial_pxa_stop_tx(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
if (up->ier & UART_IER_THRI) {
|
|
up->ier &= ~UART_IER_THRI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
}
|
|
|
|
static void serial_pxa_stop_rx(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
up->ier &= ~UART_IER_RLSI;
|
|
up->port.read_status_mask &= ~UART_LSR_DR;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
|
|
static inline void receive_chars(struct uart_pxa_port *up, int *status)
|
|
{
|
|
unsigned int ch, flag;
|
|
int max_count = 256;
|
|
|
|
do {
|
|
/* work around Errata #20 according to
|
|
* Intel(R) PXA27x Processor Family
|
|
* Specification Update (May 2005)
|
|
*
|
|
* Step 2
|
|
* Disable the Reciever Time Out Interrupt via IER[RTOEI]
|
|
*/
|
|
up->ier &= ~UART_IER_RTOIE;
|
|
serial_out(up, UART_IER, up->ier);
|
|
|
|
ch = serial_in(up, UART_RX);
|
|
flag = TTY_NORMAL;
|
|
up->port.icount.rx++;
|
|
|
|
if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
|
|
UART_LSR_FE | UART_LSR_OE))) {
|
|
/*
|
|
* For statistics only
|
|
*/
|
|
if (*status & UART_LSR_BI) {
|
|
*status &= ~(UART_LSR_FE | UART_LSR_PE);
|
|
up->port.icount.brk++;
|
|
/*
|
|
* We do the SysRQ and SAK checking
|
|
* here because otherwise the break
|
|
* may get masked by ignore_status_mask
|
|
* or read_status_mask.
|
|
*/
|
|
if (uart_handle_break(&up->port))
|
|
goto ignore_char;
|
|
} else if (*status & UART_LSR_PE)
|
|
up->port.icount.parity++;
|
|
else if (*status & UART_LSR_FE)
|
|
up->port.icount.frame++;
|
|
if (*status & UART_LSR_OE)
|
|
up->port.icount.overrun++;
|
|
|
|
/*
|
|
* Mask off conditions which should be ignored.
|
|
*/
|
|
*status &= up->port.read_status_mask;
|
|
|
|
#ifdef CONFIG_SERIAL_PXA_CONSOLE
|
|
if (up->port.line == up->port.cons->index) {
|
|
/* Recover the break flag from console xmit */
|
|
*status |= up->lsr_break_flag;
|
|
up->lsr_break_flag = 0;
|
|
}
|
|
#endif
|
|
if (*status & UART_LSR_BI) {
|
|
flag = TTY_BREAK;
|
|
} else if (*status & UART_LSR_PE)
|
|
flag = TTY_PARITY;
|
|
else if (*status & UART_LSR_FE)
|
|
flag = TTY_FRAME;
|
|
}
|
|
|
|
if (uart_handle_sysrq_char(&up->port, ch))
|
|
goto ignore_char;
|
|
|
|
uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
|
|
|
|
ignore_char:
|
|
*status = serial_in(up, UART_LSR);
|
|
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
|
|
tty_flip_buffer_push(&up->port.state->port);
|
|
|
|
/* work around Errata #20 according to
|
|
* Intel(R) PXA27x Processor Family
|
|
* Specification Update (May 2005)
|
|
*
|
|
* Step 6:
|
|
* No more data in FIFO: Re-enable RTO interrupt via IER[RTOIE]
|
|
*/
|
|
up->ier |= UART_IER_RTOIE;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
|
|
static void transmit_chars(struct uart_pxa_port *up)
|
|
{
|
|
u8 ch;
|
|
|
|
uart_port_tx_limited(&up->port, ch, up->port.fifosize / 2,
|
|
true,
|
|
serial_out(up, UART_TX, ch),
|
|
({}));
|
|
}
|
|
|
|
static void serial_pxa_start_tx(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
if (!(up->ier & UART_IER_THRI)) {
|
|
up->ier |= UART_IER_THRI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
}
|
|
|
|
/* should hold up->port.lock */
|
|
static inline void check_modem_status(struct uart_pxa_port *up)
|
|
{
|
|
int status;
|
|
|
|
status = serial_in(up, UART_MSR);
|
|
|
|
if ((status & UART_MSR_ANY_DELTA) == 0)
|
|
return;
|
|
|
|
if (status & UART_MSR_TERI)
|
|
up->port.icount.rng++;
|
|
if (status & UART_MSR_DDSR)
|
|
up->port.icount.dsr++;
|
|
if (status & UART_MSR_DDCD)
|
|
uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
|
|
if (status & UART_MSR_DCTS)
|
|
uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
|
|
|
|
wake_up_interruptible(&up->port.state->port.delta_msr_wait);
|
|
}
|
|
|
|
/*
|
|
* This handles the interrupt from one port.
|
|
*/
|
|
static inline irqreturn_t serial_pxa_irq(int irq, void *dev_id)
|
|
{
|
|
struct uart_pxa_port *up = dev_id;
|
|
unsigned int iir, lsr;
|
|
|
|
iir = serial_in(up, UART_IIR);
|
|
if (iir & UART_IIR_NO_INT)
|
|
return IRQ_NONE;
|
|
spin_lock(&up->port.lock);
|
|
lsr = serial_in(up, UART_LSR);
|
|
if (lsr & UART_LSR_DR)
|
|
receive_chars(up, &lsr);
|
|
check_modem_status(up);
|
|
if (lsr & UART_LSR_THRE)
|
|
transmit_chars(up);
|
|
spin_unlock(&up->port.lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int serial_pxa_tx_empty(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned long flags;
|
|
unsigned int ret;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned char status;
|
|
unsigned int ret;
|
|
|
|
status = serial_in(up, UART_MSR);
|
|
|
|
ret = 0;
|
|
if (status & UART_MSR_DCD)
|
|
ret |= TIOCM_CAR;
|
|
if (status & UART_MSR_RI)
|
|
ret |= TIOCM_RNG;
|
|
if (status & UART_MSR_DSR)
|
|
ret |= TIOCM_DSR;
|
|
if (status & UART_MSR_CTS)
|
|
ret |= TIOCM_CTS;
|
|
return ret;
|
|
}
|
|
|
|
static void serial_pxa_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned char mcr = 0;
|
|
|
|
if (mctrl & TIOCM_RTS)
|
|
mcr |= UART_MCR_RTS;
|
|
if (mctrl & TIOCM_DTR)
|
|
mcr |= UART_MCR_DTR;
|
|
if (mctrl & TIOCM_OUT1)
|
|
mcr |= UART_MCR_OUT1;
|
|
if (mctrl & TIOCM_OUT2)
|
|
mcr |= UART_MCR_OUT2;
|
|
if (mctrl & TIOCM_LOOP)
|
|
mcr |= UART_MCR_LOOP;
|
|
|
|
mcr |= up->mcr;
|
|
|
|
serial_out(up, UART_MCR, mcr);
|
|
}
|
|
|
|
static void serial_pxa_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
if (break_state == -1)
|
|
up->lcr |= UART_LCR_SBC;
|
|
else
|
|
up->lcr &= ~UART_LCR_SBC;
|
|
serial_out(up, UART_LCR, up->lcr);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
static int serial_pxa_startup(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned long flags;
|
|
int retval;
|
|
|
|
if (port->line == 3) /* HWUART */
|
|
up->mcr |= UART_MCR_AFE;
|
|
else
|
|
up->mcr = 0;
|
|
|
|
up->port.uartclk = clk_get_rate(up->clk);
|
|
|
|
/*
|
|
* Allocate the IRQ
|
|
*/
|
|
retval = request_irq(up->port.irq, serial_pxa_irq, 0, up->name, up);
|
|
if (retval)
|
|
return retval;
|
|
|
|
/*
|
|
* Clear the FIFO buffers and disable them.
|
|
* (they will be reenabled in set_termios())
|
|
*/
|
|
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
|
|
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
|
|
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
|
|
serial_out(up, UART_FCR, 0);
|
|
|
|
/*
|
|
* Clear the interrupt registers.
|
|
*/
|
|
(void) serial_in(up, UART_LSR);
|
|
(void) serial_in(up, UART_RX);
|
|
(void) serial_in(up, UART_IIR);
|
|
(void) serial_in(up, UART_MSR);
|
|
|
|
/*
|
|
* Now, initialize the UART
|
|
*/
|
|
serial_out(up, UART_LCR, UART_LCR_WLEN8);
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
up->port.mctrl |= TIOCM_OUT2;
|
|
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
/*
|
|
* Finally, enable interrupts. Note: Modem status interrupts
|
|
* are set via set_termios(), which will be occurring imminently
|
|
* anyway, so we don't enable them here.
|
|
*/
|
|
up->ier = UART_IER_RLSI | UART_IER_RDI | UART_IER_RTOIE | UART_IER_UUE;
|
|
serial_out(up, UART_IER, up->ier);
|
|
|
|
/*
|
|
* And clear the interrupt registers again for luck.
|
|
*/
|
|
(void) serial_in(up, UART_LSR);
|
|
(void) serial_in(up, UART_RX);
|
|
(void) serial_in(up, UART_IIR);
|
|
(void) serial_in(up, UART_MSR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void serial_pxa_shutdown(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned long flags;
|
|
|
|
free_irq(up->port.irq, up);
|
|
|
|
/*
|
|
* Disable interrupts from this port
|
|
*/
|
|
up->ier = 0;
|
|
serial_out(up, UART_IER, 0);
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
up->port.mctrl &= ~TIOCM_OUT2;
|
|
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
/*
|
|
* Disable break condition and FIFOs
|
|
*/
|
|
serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
|
|
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
|
|
UART_FCR_CLEAR_RCVR |
|
|
UART_FCR_CLEAR_XMIT);
|
|
serial_out(up, UART_FCR, 0);
|
|
}
|
|
|
|
static void
|
|
serial_pxa_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
const struct ktermios *old)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned char cval, fcr = 0;
|
|
unsigned long flags;
|
|
unsigned int baud, quot;
|
|
unsigned int dll;
|
|
|
|
cval = UART_LCR_WLEN(tty_get_char_size(termios->c_cflag));
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
cval |= UART_LCR_STOP;
|
|
if (termios->c_cflag & PARENB)
|
|
cval |= UART_LCR_PARITY;
|
|
if (!(termios->c_cflag & PARODD))
|
|
cval |= UART_LCR_EPAR;
|
|
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
if ((up->port.uartclk / quot) < (2400 * 16))
|
|
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR1;
|
|
else if ((up->port.uartclk / quot) < (230400 * 16))
|
|
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR8;
|
|
else
|
|
fcr = UART_FCR_ENABLE_FIFO | UART_FCR_PXAR32;
|
|
|
|
/*
|
|
* Ok, we're now changing the port state. Do it with
|
|
* interrupts disabled.
|
|
*/
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
/*
|
|
* Ensure the port will be enabled.
|
|
* This is required especially for serial console.
|
|
*/
|
|
up->ier |= UART_IER_UUE;
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
|
|
if (termios->c_iflag & INPCK)
|
|
up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
|
|
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
|
|
up->port.read_status_mask |= UART_LSR_BI;
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
up->port.ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
|
|
if (termios->c_iflag & IGNBRK) {
|
|
up->port.ignore_status_mask |= UART_LSR_BI;
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
up->port.ignore_status_mask |= UART_LSR_OE;
|
|
}
|
|
|
|
/*
|
|
* ignore all characters if CREAD is not set
|
|
*/
|
|
if ((termios->c_cflag & CREAD) == 0)
|
|
up->port.ignore_status_mask |= UART_LSR_DR;
|
|
|
|
/*
|
|
* CTS flow control flag and modem status interrupts
|
|
*/
|
|
up->ier &= ~UART_IER_MSI;
|
|
if (UART_ENABLE_MS(&up->port, termios->c_cflag))
|
|
up->ier |= UART_IER_MSI;
|
|
|
|
serial_out(up, UART_IER, up->ier);
|
|
|
|
if (termios->c_cflag & CRTSCTS)
|
|
up->mcr |= UART_MCR_AFE;
|
|
else
|
|
up->mcr &= ~UART_MCR_AFE;
|
|
|
|
serial_out(up, UART_LCR, cval | UART_LCR_DLAB); /* set DLAB */
|
|
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
|
|
|
|
/*
|
|
* work around Errata #75 according to Intel(R) PXA27x Processor Family
|
|
* Specification Update (Nov 2005)
|
|
*/
|
|
dll = serial_in(up, UART_DLL);
|
|
WARN_ON(dll != (quot & 0xff));
|
|
|
|
serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
|
|
serial_out(up, UART_LCR, cval); /* reset DLAB */
|
|
up->lcr = cval; /* Save LCR */
|
|
serial_pxa_set_mctrl(&up->port, up->port.mctrl);
|
|
serial_out(up, UART_FCR, fcr);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
static void
|
|
serial_pxa_pm(struct uart_port *port, unsigned int state,
|
|
unsigned int oldstate)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
if (!state)
|
|
clk_prepare_enable(up->clk);
|
|
else
|
|
clk_disable_unprepare(up->clk);
|
|
}
|
|
|
|
static void serial_pxa_release_port(struct uart_port *port)
|
|
{
|
|
}
|
|
|
|
static int serial_pxa_request_port(struct uart_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void serial_pxa_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
up->port.type = PORT_PXA;
|
|
}
|
|
|
|
static int
|
|
serial_pxa_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
/* we don't want the core code to modify any port params */
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const char *
|
|
serial_pxa_type(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
return up->name;
|
|
}
|
|
|
|
static struct uart_pxa_port *serial_pxa_ports[4];
|
|
static struct uart_driver serial_pxa_reg;
|
|
|
|
#ifdef CONFIG_SERIAL_PXA_CONSOLE
|
|
|
|
/*
|
|
* Wait for transmitter & holding register to empty
|
|
*/
|
|
static void wait_for_xmitr(struct uart_pxa_port *up)
|
|
{
|
|
unsigned int status, tmout = 10000;
|
|
|
|
/* Wait up to 10ms for the character(s) to be sent. */
|
|
do {
|
|
status = serial_in(up, UART_LSR);
|
|
|
|
if (status & UART_LSR_BI)
|
|
up->lsr_break_flag = UART_LSR_BI;
|
|
|
|
if (--tmout == 0)
|
|
break;
|
|
udelay(1);
|
|
} while (!uart_lsr_tx_empty(status));
|
|
|
|
/* Wait up to 1s for flow control if necessary */
|
|
if (up->port.flags & UPF_CONS_FLOW) {
|
|
tmout = 1000000;
|
|
while (--tmout &&
|
|
((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
|
|
udelay(1);
|
|
}
|
|
}
|
|
|
|
static void serial_pxa_console_putchar(struct uart_port *port, unsigned char ch)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
wait_for_xmitr(up);
|
|
serial_out(up, UART_TX, ch);
|
|
}
|
|
|
|
/*
|
|
* Print a string to the serial port trying not to disturb
|
|
* any possible real use of the port...
|
|
*
|
|
* The console_lock must be held when we get here.
|
|
*/
|
|
static void
|
|
serial_pxa_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct uart_pxa_port *up = serial_pxa_ports[co->index];
|
|
unsigned int ier;
|
|
unsigned long flags;
|
|
int locked = 1;
|
|
|
|
clk_enable(up->clk);
|
|
local_irq_save(flags);
|
|
if (up->port.sysrq)
|
|
locked = 0;
|
|
else if (oops_in_progress)
|
|
locked = spin_trylock(&up->port.lock);
|
|
else
|
|
spin_lock(&up->port.lock);
|
|
|
|
/*
|
|
* First save the IER then disable the interrupts
|
|
*/
|
|
ier = serial_in(up, UART_IER);
|
|
serial_out(up, UART_IER, UART_IER_UUE);
|
|
|
|
uart_console_write(&up->port, s, count, serial_pxa_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore the IER
|
|
*/
|
|
wait_for_xmitr(up);
|
|
serial_out(up, UART_IER, ier);
|
|
|
|
if (locked)
|
|
spin_unlock(&up->port.lock);
|
|
local_irq_restore(flags);
|
|
clk_disable(up->clk);
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
/*
|
|
* Console polling routines for writing and reading from the uart while
|
|
* in an interrupt or debug context.
|
|
*/
|
|
|
|
static int serial_pxa_get_poll_char(struct uart_port *port)
|
|
{
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
unsigned char lsr = serial_in(up, UART_LSR);
|
|
|
|
while (!(lsr & UART_LSR_DR))
|
|
lsr = serial_in(up, UART_LSR);
|
|
|
|
return serial_in(up, UART_RX);
|
|
}
|
|
|
|
|
|
static void serial_pxa_put_poll_char(struct uart_port *port,
|
|
unsigned char c)
|
|
{
|
|
unsigned int ier;
|
|
struct uart_pxa_port *up = (struct uart_pxa_port *)port;
|
|
|
|
/*
|
|
* First save the IER then disable the interrupts
|
|
*/
|
|
ier = serial_in(up, UART_IER);
|
|
serial_out(up, UART_IER, UART_IER_UUE);
|
|
|
|
wait_for_xmitr(up);
|
|
/*
|
|
* Send the character out.
|
|
*/
|
|
serial_out(up, UART_TX, c);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore the IER
|
|
*/
|
|
wait_for_xmitr(up);
|
|
serial_out(up, UART_IER, ier);
|
|
}
|
|
|
|
#endif /* CONFIG_CONSOLE_POLL */
|
|
|
|
static int __init
|
|
serial_pxa_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_pxa_port *up;
|
|
int baud = 9600;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
if (co->index == -1 || co->index >= serial_pxa_reg.nr)
|
|
co->index = 0;
|
|
up = serial_pxa_ports[co->index];
|
|
if (!up)
|
|
return -ENODEV;
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(&up->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct console serial_pxa_console = {
|
|
.name = "ttyS",
|
|
.write = serial_pxa_console_write,
|
|
.device = uart_console_device,
|
|
.setup = serial_pxa_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &serial_pxa_reg,
|
|
};
|
|
|
|
#define PXA_CONSOLE &serial_pxa_console
|
|
#else
|
|
#define PXA_CONSOLE NULL
|
|
#endif
|
|
|
|
static const struct uart_ops serial_pxa_pops = {
|
|
.tx_empty = serial_pxa_tx_empty,
|
|
.set_mctrl = serial_pxa_set_mctrl,
|
|
.get_mctrl = serial_pxa_get_mctrl,
|
|
.stop_tx = serial_pxa_stop_tx,
|
|
.start_tx = serial_pxa_start_tx,
|
|
.stop_rx = serial_pxa_stop_rx,
|
|
.enable_ms = serial_pxa_enable_ms,
|
|
.break_ctl = serial_pxa_break_ctl,
|
|
.startup = serial_pxa_startup,
|
|
.shutdown = serial_pxa_shutdown,
|
|
.set_termios = serial_pxa_set_termios,
|
|
.pm = serial_pxa_pm,
|
|
.type = serial_pxa_type,
|
|
.release_port = serial_pxa_release_port,
|
|
.request_port = serial_pxa_request_port,
|
|
.config_port = serial_pxa_config_port,
|
|
.verify_port = serial_pxa_verify_port,
|
|
#if defined(CONFIG_CONSOLE_POLL) && defined(CONFIG_SERIAL_PXA_CONSOLE)
|
|
.poll_get_char = serial_pxa_get_poll_char,
|
|
.poll_put_char = serial_pxa_put_poll_char,
|
|
#endif
|
|
};
|
|
|
|
static struct uart_driver serial_pxa_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "PXA serial",
|
|
.dev_name = "ttyS",
|
|
.major = TTY_MAJOR,
|
|
.minor = 64,
|
|
.nr = 4,
|
|
.cons = PXA_CONSOLE,
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
static int serial_pxa_suspend(struct device *dev)
|
|
{
|
|
struct uart_pxa_port *sport = dev_get_drvdata(dev);
|
|
|
|
if (sport)
|
|
uart_suspend_port(&serial_pxa_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int serial_pxa_resume(struct device *dev)
|
|
{
|
|
struct uart_pxa_port *sport = dev_get_drvdata(dev);
|
|
|
|
if (sport)
|
|
uart_resume_port(&serial_pxa_reg, &sport->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops serial_pxa_pm_ops = {
|
|
.suspend = serial_pxa_suspend,
|
|
.resume = serial_pxa_resume,
|
|
};
|
|
#endif
|
|
|
|
static const struct of_device_id serial_pxa_dt_ids[] = {
|
|
{ .compatible = "mrvl,pxa-uart", },
|
|
{ .compatible = "mrvl,mmp-uart", },
|
|
{}
|
|
};
|
|
|
|
static int serial_pxa_probe_dt(struct platform_device *pdev,
|
|
struct uart_pxa_port *sport)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
int ret;
|
|
|
|
if (!np)
|
|
return 1;
|
|
|
|
ret = of_alias_get_id(np, "serial");
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret);
|
|
return ret;
|
|
}
|
|
sport->port.line = ret;
|
|
return 0;
|
|
}
|
|
|
|
static int serial_pxa_probe(struct platform_device *dev)
|
|
{
|
|
struct uart_pxa_port *sport;
|
|
struct resource *mmres;
|
|
int ret;
|
|
int irq;
|
|
|
|
mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (!mmres)
|
|
return -ENODEV;
|
|
|
|
irq = platform_get_irq(dev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
sport = kzalloc(sizeof(struct uart_pxa_port), GFP_KERNEL);
|
|
if (!sport)
|
|
return -ENOMEM;
|
|
|
|
sport->clk = clk_get(&dev->dev, NULL);
|
|
if (IS_ERR(sport->clk)) {
|
|
ret = PTR_ERR(sport->clk);
|
|
goto err_free;
|
|
}
|
|
|
|
ret = clk_prepare(sport->clk);
|
|
if (ret) {
|
|
clk_put(sport->clk);
|
|
goto err_free;
|
|
}
|
|
|
|
sport->port.type = PORT_PXA;
|
|
sport->port.iotype = UPIO_MEM;
|
|
sport->port.mapbase = mmres->start;
|
|
sport->port.irq = irq;
|
|
sport->port.fifosize = 64;
|
|
sport->port.ops = &serial_pxa_pops;
|
|
sport->port.dev = &dev->dev;
|
|
sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
|
|
sport->port.uartclk = clk_get_rate(sport->clk);
|
|
sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PXA_CONSOLE);
|
|
|
|
ret = serial_pxa_probe_dt(dev, sport);
|
|
if (ret > 0)
|
|
sport->port.line = dev->id;
|
|
else if (ret < 0)
|
|
goto err_clk;
|
|
if (sport->port.line >= ARRAY_SIZE(serial_pxa_ports)) {
|
|
dev_err(&dev->dev, "serial%d out of range\n", sport->port.line);
|
|
ret = -EINVAL;
|
|
goto err_clk;
|
|
}
|
|
snprintf(sport->name, PXA_NAME_LEN - 1, "UART%d", sport->port.line + 1);
|
|
|
|
sport->port.membase = ioremap(mmres->start, resource_size(mmres));
|
|
if (!sport->port.membase) {
|
|
ret = -ENOMEM;
|
|
goto err_clk;
|
|
}
|
|
|
|
serial_pxa_ports[sport->port.line] = sport;
|
|
|
|
uart_add_one_port(&serial_pxa_reg, &sport->port);
|
|
platform_set_drvdata(dev, sport);
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
clk_unprepare(sport->clk);
|
|
clk_put(sport->clk);
|
|
err_free:
|
|
kfree(sport);
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver serial_pxa_driver = {
|
|
.probe = serial_pxa_probe,
|
|
|
|
.driver = {
|
|
.name = "pxa2xx-uart",
|
|
#ifdef CONFIG_PM
|
|
.pm = &serial_pxa_pm_ops,
|
|
#endif
|
|
.suppress_bind_attrs = true,
|
|
.of_match_table = serial_pxa_dt_ids,
|
|
},
|
|
};
|
|
|
|
|
|
/* 8250 driver for PXA serial ports should be used */
|
|
static int __init serial_pxa_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = uart_register_driver(&serial_pxa_reg);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
ret = platform_driver_register(&serial_pxa_driver);
|
|
if (ret != 0)
|
|
uart_unregister_driver(&serial_pxa_reg);
|
|
|
|
return ret;
|
|
}
|
|
device_initcall(serial_pxa_init);
|