2027 lines
50 KiB
C
2027 lines
50 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Cadence CDNSP DRD Driver.
|
|
*
|
|
* Copyright (C) 2020 Cadence.
|
|
*
|
|
* Author: Pawel Laszczak <pawell@cadence.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/module.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/dmi.h>
|
|
|
|
#include "core.h"
|
|
#include "gadget-export.h"
|
|
#include "drd.h"
|
|
#include "cdnsp-gadget.h"
|
|
#include "cdnsp-trace.h"
|
|
|
|
unsigned int cdnsp_port_speed(unsigned int port_status)
|
|
{
|
|
/*Detect gadget speed based on PORTSC register*/
|
|
if (DEV_SUPERSPEEDPLUS(port_status))
|
|
return USB_SPEED_SUPER_PLUS;
|
|
else if (DEV_SUPERSPEED(port_status))
|
|
return USB_SPEED_SUPER;
|
|
else if (DEV_HIGHSPEED(port_status))
|
|
return USB_SPEED_HIGH;
|
|
else if (DEV_FULLSPEED(port_status))
|
|
return USB_SPEED_FULL;
|
|
|
|
/* If device is detached then speed will be USB_SPEED_UNKNOWN.*/
|
|
return USB_SPEED_UNKNOWN;
|
|
}
|
|
|
|
/*
|
|
* Given a port state, this function returns a value that would result in the
|
|
* port being in the same state, if the value was written to the port status
|
|
* control register.
|
|
* Save Read Only (RO) bits and save read/write bits where
|
|
* writing a 0 clears the bit and writing a 1 sets the bit (RWS).
|
|
* For all other types (RW1S, RW1CS, RW, and RZ), writing a '0' has no effect.
|
|
*/
|
|
u32 cdnsp_port_state_to_neutral(u32 state)
|
|
{
|
|
/* Save read-only status and port state. */
|
|
return (state & CDNSP_PORT_RO) | (state & CDNSP_PORT_RWS);
|
|
}
|
|
|
|
/**
|
|
* cdnsp_find_next_ext_cap - Find the offset of the extended capabilities
|
|
* with capability ID id.
|
|
* @base: PCI MMIO registers base address.
|
|
* @start: Address at which to start looking, (0 or HCC_PARAMS to start at
|
|
* beginning of list)
|
|
* @id: Extended capability ID to search for.
|
|
*
|
|
* Returns the offset of the next matching extended capability structure.
|
|
* Some capabilities can occur several times,
|
|
* e.g., the EXT_CAPS_PROTOCOL, and this provides a way to find them all.
|
|
*/
|
|
int cdnsp_find_next_ext_cap(void __iomem *base, u32 start, int id)
|
|
{
|
|
u32 offset = start;
|
|
u32 next;
|
|
u32 val;
|
|
|
|
if (!start || start == HCC_PARAMS_OFFSET) {
|
|
val = readl(base + HCC_PARAMS_OFFSET);
|
|
if (val == ~0)
|
|
return 0;
|
|
|
|
offset = HCC_EXT_CAPS(val) << 2;
|
|
if (!offset)
|
|
return 0;
|
|
}
|
|
|
|
do {
|
|
val = readl(base + offset);
|
|
if (val == ~0)
|
|
return 0;
|
|
|
|
if (EXT_CAPS_ID(val) == id && offset != start)
|
|
return offset;
|
|
|
|
next = EXT_CAPS_NEXT(val);
|
|
offset += next << 2;
|
|
} while (next);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void cdnsp_set_link_state(struct cdnsp_device *pdev,
|
|
__le32 __iomem *port_regs,
|
|
u32 link_state)
|
|
{
|
|
int port_num = 0xFF;
|
|
u32 temp;
|
|
|
|
temp = readl(port_regs);
|
|
temp = cdnsp_port_state_to_neutral(temp);
|
|
temp |= PORT_WKCONN_E | PORT_WKDISC_E;
|
|
writel(temp, port_regs);
|
|
|
|
temp &= ~PORT_PLS_MASK;
|
|
temp |= PORT_LINK_STROBE | link_state;
|
|
|
|
if (pdev->active_port)
|
|
port_num = pdev->active_port->port_num;
|
|
|
|
trace_cdnsp_handle_port_status(port_num, readl(port_regs));
|
|
writel(temp, port_regs);
|
|
trace_cdnsp_link_state_changed(port_num, readl(port_regs));
|
|
}
|
|
|
|
static void cdnsp_disable_port(struct cdnsp_device *pdev,
|
|
__le32 __iomem *port_regs)
|
|
{
|
|
u32 temp = cdnsp_port_state_to_neutral(readl(port_regs));
|
|
|
|
writel(temp | PORT_PED, port_regs);
|
|
}
|
|
|
|
static void cdnsp_clear_port_change_bit(struct cdnsp_device *pdev,
|
|
__le32 __iomem *port_regs)
|
|
{
|
|
u32 portsc = readl(port_regs);
|
|
|
|
writel(cdnsp_port_state_to_neutral(portsc) |
|
|
(portsc & PORT_CHANGE_BITS), port_regs);
|
|
}
|
|
|
|
static void cdnsp_set_chicken_bits_2(struct cdnsp_device *pdev, u32 bit)
|
|
{
|
|
__le32 __iomem *reg;
|
|
void __iomem *base;
|
|
u32 offset = 0;
|
|
|
|
base = &pdev->cap_regs->hc_capbase;
|
|
offset = cdnsp_find_next_ext_cap(base, offset, D_XEC_PRE_REGS_CAP);
|
|
reg = base + offset + REG_CHICKEN_BITS_2_OFFSET;
|
|
|
|
bit = readl(reg) | bit;
|
|
writel(bit, reg);
|
|
}
|
|
|
|
static void cdnsp_clear_chicken_bits_2(struct cdnsp_device *pdev, u32 bit)
|
|
{
|
|
__le32 __iomem *reg;
|
|
void __iomem *base;
|
|
u32 offset = 0;
|
|
|
|
base = &pdev->cap_regs->hc_capbase;
|
|
offset = cdnsp_find_next_ext_cap(base, offset, D_XEC_PRE_REGS_CAP);
|
|
reg = base + offset + REG_CHICKEN_BITS_2_OFFSET;
|
|
|
|
bit = readl(reg) & ~bit;
|
|
writel(bit, reg);
|
|
}
|
|
|
|
/*
|
|
* Disable interrupts and begin the controller halting process.
|
|
*/
|
|
static void cdnsp_quiesce(struct cdnsp_device *pdev)
|
|
{
|
|
u32 halted;
|
|
u32 mask;
|
|
u32 cmd;
|
|
|
|
mask = ~(u32)(CDNSP_IRQS);
|
|
|
|
halted = readl(&pdev->op_regs->status) & STS_HALT;
|
|
if (!halted)
|
|
mask &= ~(CMD_R_S | CMD_DEVEN);
|
|
|
|
cmd = readl(&pdev->op_regs->command);
|
|
cmd &= mask;
|
|
writel(cmd, &pdev->op_regs->command);
|
|
}
|
|
|
|
/*
|
|
* Force controller into halt state.
|
|
*
|
|
* Disable any IRQs and clear the run/stop bit.
|
|
* Controller will complete any current and actively pipelined transactions, and
|
|
* should halt within 16 ms of the run/stop bit being cleared.
|
|
* Read controller Halted bit in the status register to see when the
|
|
* controller is finished.
|
|
*/
|
|
int cdnsp_halt(struct cdnsp_device *pdev)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
cdnsp_quiesce(pdev);
|
|
|
|
ret = readl_poll_timeout_atomic(&pdev->op_regs->status, val,
|
|
val & STS_HALT, 1,
|
|
CDNSP_MAX_HALT_USEC);
|
|
if (ret) {
|
|
dev_err(pdev->dev, "ERROR: Device halt failed\n");
|
|
return ret;
|
|
}
|
|
|
|
pdev->cdnsp_state |= CDNSP_STATE_HALTED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* device controller died, register read returns 0xffffffff, or command never
|
|
* ends.
|
|
*/
|
|
void cdnsp_died(struct cdnsp_device *pdev)
|
|
{
|
|
dev_err(pdev->dev, "ERROR: CDNSP controller not responding\n");
|
|
pdev->cdnsp_state |= CDNSP_STATE_DYING;
|
|
cdnsp_halt(pdev);
|
|
}
|
|
|
|
/*
|
|
* Set the run bit and wait for the device to be running.
|
|
*/
|
|
static int cdnsp_start(struct cdnsp_device *pdev)
|
|
{
|
|
u32 temp;
|
|
int ret;
|
|
|
|
temp = readl(&pdev->op_regs->command);
|
|
temp |= (CMD_R_S | CMD_DEVEN);
|
|
writel(temp, &pdev->op_regs->command);
|
|
|
|
pdev->cdnsp_state = 0;
|
|
|
|
/*
|
|
* Wait for the STS_HALT Status bit to be 0 to indicate the device is
|
|
* running.
|
|
*/
|
|
ret = readl_poll_timeout_atomic(&pdev->op_regs->status, temp,
|
|
!(temp & STS_HALT), 1,
|
|
CDNSP_MAX_HALT_USEC);
|
|
if (ret) {
|
|
pdev->cdnsp_state = CDNSP_STATE_DYING;
|
|
dev_err(pdev->dev, "ERROR: Controller run failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Reset a halted controller.
|
|
*
|
|
* This resets pipelines, timers, counters, state machines, etc.
|
|
* Transactions will be terminated immediately, and operational registers
|
|
* will be set to their defaults.
|
|
*/
|
|
int cdnsp_reset(struct cdnsp_device *pdev)
|
|
{
|
|
u32 command;
|
|
u32 temp;
|
|
int ret;
|
|
|
|
temp = readl(&pdev->op_regs->status);
|
|
|
|
if (temp == ~(u32)0) {
|
|
dev_err(pdev->dev, "Device not accessible, reset failed.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((temp & STS_HALT) == 0) {
|
|
dev_err(pdev->dev, "Controller not halted, aborting reset.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
command = readl(&pdev->op_regs->command);
|
|
command |= CMD_RESET;
|
|
writel(command, &pdev->op_regs->command);
|
|
|
|
ret = readl_poll_timeout_atomic(&pdev->op_regs->command, temp,
|
|
!(temp & CMD_RESET), 1,
|
|
10 * 1000);
|
|
if (ret) {
|
|
dev_err(pdev->dev, "ERROR: Controller reset failed\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* CDNSP cannot write any doorbells or operational registers other
|
|
* than status until the "Controller Not Ready" flag is cleared.
|
|
*/
|
|
ret = readl_poll_timeout_atomic(&pdev->op_regs->status, temp,
|
|
!(temp & STS_CNR), 1,
|
|
10 * 1000);
|
|
|
|
if (ret) {
|
|
dev_err(pdev->dev, "ERROR: Controller not ready to work\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(pdev->dev, "Controller ready to work");
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* cdnsp_get_endpoint_index - Find the index for an endpoint given its
|
|
* descriptor.Use the return value to right shift 1 for the bitmask.
|
|
*
|
|
* Index = (epnum * 2) + direction - 1,
|
|
* where direction = 0 for OUT, 1 for IN.
|
|
* For control endpoints, the IN index is used (OUT index is unused), so
|
|
* index = (epnum * 2) + direction - 1 = (epnum * 2) + 1 - 1 = (epnum * 2)
|
|
*/
|
|
static unsigned int
|
|
cdnsp_get_endpoint_index(const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
unsigned int index = (unsigned int)usb_endpoint_num(desc);
|
|
|
|
if (usb_endpoint_xfer_control(desc))
|
|
return index * 2;
|
|
|
|
return (index * 2) + (usb_endpoint_dir_in(desc) ? 1 : 0) - 1;
|
|
}
|
|
|
|
/*
|
|
* Find the flag for this endpoint (for use in the control context). Use the
|
|
* endpoint index to create a bitmask. The slot context is bit 0, endpoint 0 is
|
|
* bit 1, etc.
|
|
*/
|
|
static unsigned int
|
|
cdnsp_get_endpoint_flag(const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
return 1 << (cdnsp_get_endpoint_index(desc) + 1);
|
|
}
|
|
|
|
int cdnsp_ep_enqueue(struct cdnsp_ep *pep, struct cdnsp_request *preq)
|
|
{
|
|
struct cdnsp_device *pdev = pep->pdev;
|
|
struct usb_request *request;
|
|
int ret;
|
|
|
|
if (preq->epnum == 0 && !list_empty(&pep->pending_list)) {
|
|
trace_cdnsp_request_enqueue_busy(preq);
|
|
return -EBUSY;
|
|
}
|
|
|
|
request = &preq->request;
|
|
request->actual = 0;
|
|
request->status = -EINPROGRESS;
|
|
preq->direction = pep->direction;
|
|
preq->epnum = pep->number;
|
|
preq->td.drbl = 0;
|
|
|
|
ret = usb_gadget_map_request_by_dev(pdev->dev, request, pep->direction);
|
|
if (ret) {
|
|
trace_cdnsp_request_enqueue_error(preq);
|
|
return ret;
|
|
}
|
|
|
|
list_add_tail(&preq->list, &pep->pending_list);
|
|
|
|
trace_cdnsp_request_enqueue(preq);
|
|
|
|
switch (usb_endpoint_type(pep->endpoint.desc)) {
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
ret = cdnsp_queue_ctrl_tx(pdev, preq);
|
|
break;
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
case USB_ENDPOINT_XFER_INT:
|
|
ret = cdnsp_queue_bulk_tx(pdev, preq);
|
|
break;
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
ret = cdnsp_queue_isoc_tx(pdev, preq);
|
|
}
|
|
|
|
if (ret)
|
|
goto unmap;
|
|
|
|
return 0;
|
|
|
|
unmap:
|
|
usb_gadget_unmap_request_by_dev(pdev->dev, &preq->request,
|
|
pep->direction);
|
|
list_del(&preq->list);
|
|
trace_cdnsp_request_enqueue_error(preq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Remove the request's TD from the endpoint ring. This may cause the
|
|
* controller to stop USB transfers, potentially stopping in the middle of a
|
|
* TRB buffer. The controller should pick up where it left off in the TD,
|
|
* unless a Set Transfer Ring Dequeue Pointer is issued.
|
|
*
|
|
* The TRBs that make up the buffers for the canceled request will be "removed"
|
|
* from the ring. Since the ring is a contiguous structure, they can't be
|
|
* physically removed. Instead, there are two options:
|
|
*
|
|
* 1) If the controller is in the middle of processing the request to be
|
|
* canceled, we simply move the ring's dequeue pointer past those TRBs
|
|
* using the Set Transfer Ring Dequeue Pointer command. This will be
|
|
* the common case, when drivers timeout on the last submitted request
|
|
* and attempt to cancel.
|
|
*
|
|
* 2) If the controller is in the middle of a different TD, we turn the TRBs
|
|
* into a series of 1-TRB transfer no-op TDs. No-ops shouldn't be chained.
|
|
* The controller will need to invalidate the any TRBs it has cached after
|
|
* the stop endpoint command.
|
|
*
|
|
* 3) The TD may have completed by the time the Stop Endpoint Command
|
|
* completes, so software needs to handle that case too.
|
|
*
|
|
*/
|
|
int cdnsp_ep_dequeue(struct cdnsp_ep *pep, struct cdnsp_request *preq)
|
|
{
|
|
struct cdnsp_device *pdev = pep->pdev;
|
|
int ret_stop = 0;
|
|
int ret_rem;
|
|
|
|
trace_cdnsp_request_dequeue(preq);
|
|
|
|
if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_RUNNING)
|
|
ret_stop = cdnsp_cmd_stop_ep(pdev, pep);
|
|
|
|
ret_rem = cdnsp_remove_request(pdev, preq, pep);
|
|
|
|
return ret_rem ? ret_rem : ret_stop;
|
|
}
|
|
|
|
static void cdnsp_zero_in_ctx(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_input_control_ctx *ctrl_ctx;
|
|
struct cdnsp_slot_ctx *slot_ctx;
|
|
struct cdnsp_ep_ctx *ep_ctx;
|
|
int i;
|
|
|
|
ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
|
|
|
|
/*
|
|
* When a device's add flag and drop flag are zero, any subsequent
|
|
* configure endpoint command will leave that endpoint's state
|
|
* untouched. Make sure we don't leave any old state in the input
|
|
* endpoint contexts.
|
|
*/
|
|
ctrl_ctx->drop_flags = 0;
|
|
ctrl_ctx->add_flags = 0;
|
|
slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
|
|
slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
|
|
|
|
/* Endpoint 0 is always valid */
|
|
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1));
|
|
for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i) {
|
|
ep_ctx = cdnsp_get_ep_ctx(&pdev->in_ctx, i);
|
|
ep_ctx->ep_info = 0;
|
|
ep_ctx->ep_info2 = 0;
|
|
ep_ctx->deq = 0;
|
|
ep_ctx->tx_info = 0;
|
|
}
|
|
}
|
|
|
|
/* Issue a configure endpoint command and wait for it to finish. */
|
|
static int cdnsp_configure_endpoint(struct cdnsp_device *pdev)
|
|
{
|
|
int ret;
|
|
|
|
cdnsp_queue_configure_endpoint(pdev, pdev->cmd.in_ctx->dma);
|
|
cdnsp_ring_cmd_db(pdev);
|
|
ret = cdnsp_wait_for_cmd_compl(pdev);
|
|
if (ret) {
|
|
dev_err(pdev->dev,
|
|
"ERR: unexpected command completion code 0x%x.\n", ret);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void cdnsp_invalidate_ep_events(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep)
|
|
{
|
|
struct cdnsp_segment *segment;
|
|
union cdnsp_trb *event;
|
|
u32 cycle_state;
|
|
u32 data;
|
|
|
|
event = pdev->event_ring->dequeue;
|
|
segment = pdev->event_ring->deq_seg;
|
|
cycle_state = pdev->event_ring->cycle_state;
|
|
|
|
while (1) {
|
|
data = le32_to_cpu(event->trans_event.flags);
|
|
|
|
/* Check the owner of the TRB. */
|
|
if ((data & TRB_CYCLE) != cycle_state)
|
|
break;
|
|
|
|
if (TRB_FIELD_TO_TYPE(data) == TRB_TRANSFER &&
|
|
TRB_TO_EP_ID(data) == (pep->idx + 1)) {
|
|
data |= TRB_EVENT_INVALIDATE;
|
|
event->trans_event.flags = cpu_to_le32(data);
|
|
}
|
|
|
|
if (cdnsp_last_trb_on_seg(segment, event)) {
|
|
cycle_state ^= 1;
|
|
segment = pdev->event_ring->deq_seg->next;
|
|
event = segment->trbs;
|
|
} else {
|
|
event++;
|
|
}
|
|
}
|
|
}
|
|
|
|
int cdnsp_wait_for_cmd_compl(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_segment *event_deq_seg;
|
|
union cdnsp_trb *cmd_trb;
|
|
dma_addr_t cmd_deq_dma;
|
|
union cdnsp_trb *event;
|
|
u32 cycle_state;
|
|
int ret, val;
|
|
u64 cmd_dma;
|
|
u32 flags;
|
|
|
|
cmd_trb = pdev->cmd.command_trb;
|
|
pdev->cmd.status = 0;
|
|
|
|
trace_cdnsp_cmd_wait_for_compl(pdev->cmd_ring, &cmd_trb->generic);
|
|
|
|
ret = readl_poll_timeout_atomic(&pdev->op_regs->cmd_ring, val,
|
|
!CMD_RING_BUSY(val), 1,
|
|
CDNSP_CMD_TIMEOUT);
|
|
if (ret) {
|
|
dev_err(pdev->dev, "ERR: Timeout while waiting for command\n");
|
|
trace_cdnsp_cmd_timeout(pdev->cmd_ring, &cmd_trb->generic);
|
|
pdev->cdnsp_state = CDNSP_STATE_DYING;
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
event = pdev->event_ring->dequeue;
|
|
event_deq_seg = pdev->event_ring->deq_seg;
|
|
cycle_state = pdev->event_ring->cycle_state;
|
|
|
|
cmd_deq_dma = cdnsp_trb_virt_to_dma(pdev->cmd_ring->deq_seg, cmd_trb);
|
|
if (!cmd_deq_dma)
|
|
return -EINVAL;
|
|
|
|
while (1) {
|
|
flags = le32_to_cpu(event->event_cmd.flags);
|
|
|
|
/* Check the owner of the TRB. */
|
|
if ((flags & TRB_CYCLE) != cycle_state)
|
|
return -EINVAL;
|
|
|
|
cmd_dma = le64_to_cpu(event->event_cmd.cmd_trb);
|
|
|
|
/*
|
|
* Check whether the completion event is for last queued
|
|
* command.
|
|
*/
|
|
if (TRB_FIELD_TO_TYPE(flags) != TRB_COMPLETION ||
|
|
cmd_dma != (u64)cmd_deq_dma) {
|
|
if (!cdnsp_last_trb_on_seg(event_deq_seg, event)) {
|
|
event++;
|
|
continue;
|
|
}
|
|
|
|
if (cdnsp_last_trb_on_ring(pdev->event_ring,
|
|
event_deq_seg, event))
|
|
cycle_state ^= 1;
|
|
|
|
event_deq_seg = event_deq_seg->next;
|
|
event = event_deq_seg->trbs;
|
|
continue;
|
|
}
|
|
|
|
trace_cdnsp_handle_command(pdev->cmd_ring, &cmd_trb->generic);
|
|
|
|
pdev->cmd.status = GET_COMP_CODE(le32_to_cpu(event->event_cmd.status));
|
|
if (pdev->cmd.status == COMP_SUCCESS)
|
|
return 0;
|
|
|
|
return -pdev->cmd.status;
|
|
}
|
|
}
|
|
|
|
int cdnsp_halt_endpoint(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep,
|
|
int value)
|
|
{
|
|
int ret;
|
|
|
|
trace_cdnsp_ep_halt(value ? "Set" : "Clear");
|
|
|
|
ret = cdnsp_cmd_stop_ep(pdev, pep);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (value) {
|
|
if (GET_EP_CTX_STATE(pep->out_ctx) == EP_STATE_STOPPED) {
|
|
cdnsp_queue_halt_endpoint(pdev, pep->idx);
|
|
cdnsp_ring_cmd_db(pdev);
|
|
ret = cdnsp_wait_for_cmd_compl(pdev);
|
|
}
|
|
|
|
pep->ep_state |= EP_HALTED;
|
|
} else {
|
|
cdnsp_queue_reset_ep(pdev, pep->idx);
|
|
cdnsp_ring_cmd_db(pdev);
|
|
ret = cdnsp_wait_for_cmd_compl(pdev);
|
|
trace_cdnsp_handle_cmd_reset_ep(pep->out_ctx);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
pep->ep_state &= ~EP_HALTED;
|
|
|
|
if (pep->idx != 0 && !(pep->ep_state & EP_WEDGE))
|
|
cdnsp_ring_doorbell_for_active_rings(pdev, pep);
|
|
|
|
pep->ep_state &= ~EP_WEDGE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdnsp_update_eps_configuration(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep)
|
|
{
|
|
struct cdnsp_input_control_ctx *ctrl_ctx;
|
|
struct cdnsp_slot_ctx *slot_ctx;
|
|
int ret = 0;
|
|
u32 ep_sts;
|
|
int i;
|
|
|
|
ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
|
|
|
|
/* Don't issue the command if there's no endpoints to update. */
|
|
if (ctrl_ctx->add_flags == 0 && ctrl_ctx->drop_flags == 0)
|
|
return 0;
|
|
|
|
ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG);
|
|
ctrl_ctx->add_flags &= cpu_to_le32(~EP0_FLAG);
|
|
ctrl_ctx->drop_flags &= cpu_to_le32(~(SLOT_FLAG | EP0_FLAG));
|
|
|
|
/* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */
|
|
slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
|
|
for (i = CDNSP_ENDPOINTS_NUM; i >= 1; i--) {
|
|
__le32 le32 = cpu_to_le32(BIT(i));
|
|
|
|
if ((pdev->eps[i - 1].ring && !(ctrl_ctx->drop_flags & le32)) ||
|
|
(ctrl_ctx->add_flags & le32) || i == 1) {
|
|
slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK);
|
|
slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i));
|
|
break;
|
|
}
|
|
}
|
|
|
|
ep_sts = GET_EP_CTX_STATE(pep->out_ctx);
|
|
|
|
if ((ctrl_ctx->add_flags != cpu_to_le32(SLOT_FLAG) &&
|
|
ep_sts == EP_STATE_DISABLED) ||
|
|
(ep_sts != EP_STATE_DISABLED && ctrl_ctx->drop_flags))
|
|
ret = cdnsp_configure_endpoint(pdev);
|
|
|
|
trace_cdnsp_configure_endpoint(cdnsp_get_slot_ctx(&pdev->out_ctx));
|
|
trace_cdnsp_handle_cmd_config_ep(pep->out_ctx);
|
|
|
|
cdnsp_zero_in_ctx(pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This submits a Reset Device Command, which will set the device state to 0,
|
|
* set the device address to 0, and disable all the endpoints except the default
|
|
* control endpoint. The USB core should come back and call
|
|
* cdnsp_setup_device(), and then re-set up the configuration.
|
|
*/
|
|
int cdnsp_reset_device(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_slot_ctx *slot_ctx;
|
|
int slot_state;
|
|
int ret, i;
|
|
|
|
slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
|
|
slot_ctx->dev_info = 0;
|
|
pdev->device_address = 0;
|
|
|
|
/* If device is not setup, there is no point in resetting it. */
|
|
slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
|
|
slot_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
|
|
trace_cdnsp_reset_device(slot_ctx);
|
|
|
|
if (slot_state <= SLOT_STATE_DEFAULT &&
|
|
pdev->eps[0].ep_state & EP_HALTED) {
|
|
cdnsp_halt_endpoint(pdev, &pdev->eps[0], 0);
|
|
}
|
|
|
|
/*
|
|
* During Reset Device command controller shall transition the
|
|
* endpoint ep0 to the Running State.
|
|
*/
|
|
pdev->eps[0].ep_state &= ~(EP_STOPPED | EP_HALTED);
|
|
pdev->eps[0].ep_state |= EP_ENABLED;
|
|
|
|
if (slot_state <= SLOT_STATE_DEFAULT)
|
|
return 0;
|
|
|
|
cdnsp_queue_reset_device(pdev);
|
|
cdnsp_ring_cmd_db(pdev);
|
|
ret = cdnsp_wait_for_cmd_compl(pdev);
|
|
|
|
/*
|
|
* After Reset Device command all not default endpoints
|
|
* are in Disabled state.
|
|
*/
|
|
for (i = 1; i < CDNSP_ENDPOINTS_NUM; ++i)
|
|
pdev->eps[i].ep_state |= EP_STOPPED | EP_UNCONFIGURED;
|
|
|
|
trace_cdnsp_handle_cmd_reset_dev(slot_ctx);
|
|
|
|
if (ret)
|
|
dev_err(pdev->dev, "Reset device failed with error code %d",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Sets the MaxPStreams field and the Linear Stream Array field.
|
|
* Sets the dequeue pointer to the stream context array.
|
|
*/
|
|
static void cdnsp_setup_streams_ep_input_ctx(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep_ctx *ep_ctx,
|
|
struct cdnsp_stream_info *stream_info)
|
|
{
|
|
u32 max_primary_streams;
|
|
|
|
/* MaxPStreams is the number of stream context array entries, not the
|
|
* number we're actually using. Must be in 2^(MaxPstreams + 1) format.
|
|
* fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc.
|
|
*/
|
|
max_primary_streams = fls(stream_info->num_stream_ctxs) - 2;
|
|
ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK);
|
|
ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams)
|
|
| EP_HAS_LSA);
|
|
ep_ctx->deq = cpu_to_le64(stream_info->ctx_array_dma);
|
|
}
|
|
|
|
/*
|
|
* The drivers use this function to prepare a bulk endpoints to use streams.
|
|
*
|
|
* Don't allow the call to succeed if endpoint only supports one stream
|
|
* (which means it doesn't support streams at all).
|
|
*/
|
|
int cdnsp_alloc_streams(struct cdnsp_device *pdev, struct cdnsp_ep *pep)
|
|
{
|
|
unsigned int num_streams = usb_ss_max_streams(pep->endpoint.comp_desc);
|
|
unsigned int num_stream_ctxs;
|
|
int ret;
|
|
|
|
if (num_streams == 0)
|
|
return 0;
|
|
|
|
if (num_streams > STREAM_NUM_STREAMS)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Add two to the number of streams requested to account for
|
|
* stream 0 that is reserved for controller usage and one additional
|
|
* for TASK SET FULL response.
|
|
*/
|
|
num_streams += 2;
|
|
|
|
/* The stream context array size must be a power of two */
|
|
num_stream_ctxs = roundup_pow_of_two(num_streams);
|
|
|
|
trace_cdnsp_stream_number(pep, num_stream_ctxs, num_streams);
|
|
|
|
ret = cdnsp_alloc_stream_info(pdev, pep, num_stream_ctxs, num_streams);
|
|
if (ret)
|
|
return ret;
|
|
|
|
cdnsp_setup_streams_ep_input_ctx(pdev, pep->in_ctx, &pep->stream_info);
|
|
|
|
pep->ep_state |= EP_HAS_STREAMS;
|
|
pep->stream_info.td_count = 0;
|
|
pep->stream_info.first_prime_det = 0;
|
|
|
|
/* Subtract 1 for stream 0, which drivers can't use. */
|
|
return num_streams - 1;
|
|
}
|
|
|
|
int cdnsp_disable_slot(struct cdnsp_device *pdev)
|
|
{
|
|
int ret;
|
|
|
|
cdnsp_queue_slot_control(pdev, TRB_DISABLE_SLOT);
|
|
cdnsp_ring_cmd_db(pdev);
|
|
ret = cdnsp_wait_for_cmd_compl(pdev);
|
|
|
|
pdev->slot_id = 0;
|
|
pdev->active_port = NULL;
|
|
|
|
trace_cdnsp_handle_cmd_disable_slot(cdnsp_get_slot_ctx(&pdev->out_ctx));
|
|
|
|
memset(pdev->in_ctx.bytes, 0, CDNSP_CTX_SIZE);
|
|
memset(pdev->out_ctx.bytes, 0, CDNSP_CTX_SIZE);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int cdnsp_enable_slot(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_slot_ctx *slot_ctx;
|
|
int slot_state;
|
|
int ret;
|
|
|
|
/* If device is not setup, there is no point in resetting it */
|
|
slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
|
|
slot_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
|
|
|
|
if (slot_state != SLOT_STATE_DISABLED)
|
|
return 0;
|
|
|
|
cdnsp_queue_slot_control(pdev, TRB_ENABLE_SLOT);
|
|
cdnsp_ring_cmd_db(pdev);
|
|
ret = cdnsp_wait_for_cmd_compl(pdev);
|
|
if (ret)
|
|
goto show_trace;
|
|
|
|
pdev->slot_id = 1;
|
|
|
|
show_trace:
|
|
trace_cdnsp_handle_cmd_enable_slot(cdnsp_get_slot_ctx(&pdev->out_ctx));
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Issue an Address Device command with BSR=0 if setup is SETUP_CONTEXT_ONLY
|
|
* or with BSR = 1 if set_address is SETUP_CONTEXT_ADDRESS.
|
|
*/
|
|
int cdnsp_setup_device(struct cdnsp_device *pdev, enum cdnsp_setup_dev setup)
|
|
{
|
|
struct cdnsp_input_control_ctx *ctrl_ctx;
|
|
struct cdnsp_slot_ctx *slot_ctx;
|
|
int dev_state = 0;
|
|
int ret;
|
|
|
|
if (!pdev->slot_id) {
|
|
trace_cdnsp_slot_id("incorrect");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!pdev->active_port->port_num)
|
|
return -EINVAL;
|
|
|
|
slot_ctx = cdnsp_get_slot_ctx(&pdev->out_ctx);
|
|
dev_state = GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state));
|
|
|
|
if (setup == SETUP_CONTEXT_ONLY && dev_state == SLOT_STATE_DEFAULT) {
|
|
trace_cdnsp_slot_already_in_default(slot_ctx);
|
|
return 0;
|
|
}
|
|
|
|
slot_ctx = cdnsp_get_slot_ctx(&pdev->in_ctx);
|
|
ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
|
|
|
|
if (!slot_ctx->dev_info || dev_state == SLOT_STATE_DEFAULT) {
|
|
ret = cdnsp_setup_addressable_priv_dev(pdev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
cdnsp_copy_ep0_dequeue_into_input_ctx(pdev);
|
|
|
|
ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
|
|
ctrl_ctx->drop_flags = 0;
|
|
|
|
trace_cdnsp_setup_device_slot(slot_ctx);
|
|
|
|
cdnsp_queue_address_device(pdev, pdev->in_ctx.dma, setup);
|
|
cdnsp_ring_cmd_db(pdev);
|
|
ret = cdnsp_wait_for_cmd_compl(pdev);
|
|
|
|
trace_cdnsp_handle_cmd_addr_dev(cdnsp_get_slot_ctx(&pdev->out_ctx));
|
|
|
|
/* Zero the input context control for later use. */
|
|
ctrl_ctx->add_flags = 0;
|
|
ctrl_ctx->drop_flags = 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
void cdnsp_set_usb2_hardware_lpm(struct cdnsp_device *pdev,
|
|
struct usb_request *req,
|
|
int enable)
|
|
{
|
|
if (pdev->active_port != &pdev->usb2_port || !pdev->gadget.lpm_capable)
|
|
return;
|
|
|
|
trace_cdnsp_lpm(enable);
|
|
|
|
if (enable)
|
|
writel(PORT_BESL(CDNSP_DEFAULT_BESL) | PORT_L1S_NYET | PORT_HLE,
|
|
&pdev->active_port->regs->portpmsc);
|
|
else
|
|
writel(PORT_L1S_NYET, &pdev->active_port->regs->portpmsc);
|
|
}
|
|
|
|
static int cdnsp_get_frame(struct cdnsp_device *pdev)
|
|
{
|
|
return readl(&pdev->run_regs->microframe_index) >> 3;
|
|
}
|
|
|
|
static int cdnsp_gadget_ep_enable(struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct cdnsp_input_control_ctx *ctrl_ctx;
|
|
struct cdnsp_device *pdev;
|
|
struct cdnsp_ep *pep;
|
|
unsigned long flags;
|
|
u32 added_ctxs;
|
|
int ret;
|
|
|
|
if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT ||
|
|
!desc->wMaxPacketSize)
|
|
return -EINVAL;
|
|
|
|
pep = to_cdnsp_ep(ep);
|
|
pdev = pep->pdev;
|
|
pep->ep_state &= ~EP_UNCONFIGURED;
|
|
|
|
if (dev_WARN_ONCE(pdev->dev, pep->ep_state & EP_ENABLED,
|
|
"%s is already enabled\n", pep->name))
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
|
|
added_ctxs = cdnsp_get_endpoint_flag(desc);
|
|
if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) {
|
|
dev_err(pdev->dev, "ERROR: Bad endpoint number\n");
|
|
ret = -EINVAL;
|
|
goto unlock;
|
|
}
|
|
|
|
pep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
|
|
|
|
if (pdev->gadget.speed == USB_SPEED_FULL) {
|
|
if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_INT)
|
|
pep->interval = desc->bInterval << 3;
|
|
if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_ISOC)
|
|
pep->interval = BIT(desc->bInterval - 1) << 3;
|
|
}
|
|
|
|
if (usb_endpoint_type(desc) == USB_ENDPOINT_XFER_ISOC) {
|
|
if (pep->interval > BIT(12)) {
|
|
dev_err(pdev->dev, "bInterval %d not supported\n",
|
|
desc->bInterval);
|
|
ret = -EINVAL;
|
|
goto unlock;
|
|
}
|
|
cdnsp_set_chicken_bits_2(pdev, CHICKEN_XDMA_2_TP_CACHE_DIS);
|
|
}
|
|
|
|
ret = cdnsp_endpoint_init(pdev, pep, GFP_ATOMIC);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
|
|
ctrl_ctx->add_flags = cpu_to_le32(added_ctxs);
|
|
ctrl_ctx->drop_flags = 0;
|
|
|
|
ret = cdnsp_update_eps_configuration(pdev, pep);
|
|
if (ret) {
|
|
cdnsp_free_endpoint_rings(pdev, pep);
|
|
goto unlock;
|
|
}
|
|
|
|
pep->ep_state |= EP_ENABLED;
|
|
pep->ep_state &= ~EP_STOPPED;
|
|
|
|
unlock:
|
|
trace_cdnsp_ep_enable_end(pep, 0);
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cdnsp_gadget_ep_disable(struct usb_ep *ep)
|
|
{
|
|
struct cdnsp_input_control_ctx *ctrl_ctx;
|
|
struct cdnsp_request *preq;
|
|
struct cdnsp_device *pdev;
|
|
struct cdnsp_ep *pep;
|
|
unsigned long flags;
|
|
u32 drop_flag;
|
|
int ret = 0;
|
|
|
|
if (!ep)
|
|
return -EINVAL;
|
|
|
|
pep = to_cdnsp_ep(ep);
|
|
pdev = pep->pdev;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
|
|
if (!(pep->ep_state & EP_ENABLED)) {
|
|
dev_err(pdev->dev, "%s is already disabled\n", pep->name);
|
|
ret = -EINVAL;
|
|
goto finish;
|
|
}
|
|
|
|
pep->ep_state |= EP_DIS_IN_RROGRESS;
|
|
|
|
/* Endpoint was unconfigured by Reset Device command. */
|
|
if (!(pep->ep_state & EP_UNCONFIGURED)) {
|
|
cdnsp_cmd_stop_ep(pdev, pep);
|
|
cdnsp_cmd_flush_ep(pdev, pep);
|
|
}
|
|
|
|
/* Remove all queued USB requests. */
|
|
while (!list_empty(&pep->pending_list)) {
|
|
preq = next_request(&pep->pending_list);
|
|
cdnsp_ep_dequeue(pep, preq);
|
|
}
|
|
|
|
cdnsp_invalidate_ep_events(pdev, pep);
|
|
|
|
pep->ep_state &= ~EP_DIS_IN_RROGRESS;
|
|
drop_flag = cdnsp_get_endpoint_flag(pep->endpoint.desc);
|
|
ctrl_ctx = cdnsp_get_input_control_ctx(&pdev->in_ctx);
|
|
ctrl_ctx->drop_flags = cpu_to_le32(drop_flag);
|
|
ctrl_ctx->add_flags = 0;
|
|
|
|
cdnsp_endpoint_zero(pdev, pep);
|
|
|
|
if (!(pep->ep_state & EP_UNCONFIGURED))
|
|
ret = cdnsp_update_eps_configuration(pdev, pep);
|
|
|
|
cdnsp_free_endpoint_rings(pdev, pep);
|
|
|
|
pep->ep_state &= ~(EP_ENABLED | EP_UNCONFIGURED);
|
|
pep->ep_state |= EP_STOPPED;
|
|
|
|
finish:
|
|
trace_cdnsp_ep_disable_end(pep, 0);
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct usb_request *cdnsp_gadget_ep_alloc_request(struct usb_ep *ep,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct cdnsp_ep *pep = to_cdnsp_ep(ep);
|
|
struct cdnsp_request *preq;
|
|
|
|
preq = kzalloc(sizeof(*preq), gfp_flags);
|
|
if (!preq)
|
|
return NULL;
|
|
|
|
preq->epnum = pep->number;
|
|
preq->pep = pep;
|
|
|
|
trace_cdnsp_alloc_request(preq);
|
|
|
|
return &preq->request;
|
|
}
|
|
|
|
static void cdnsp_gadget_ep_free_request(struct usb_ep *ep,
|
|
struct usb_request *request)
|
|
{
|
|
struct cdnsp_request *preq = to_cdnsp_request(request);
|
|
|
|
trace_cdnsp_free_request(preq);
|
|
kfree(preq);
|
|
}
|
|
|
|
static int cdnsp_gadget_ep_queue(struct usb_ep *ep,
|
|
struct usb_request *request,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct cdnsp_request *preq;
|
|
struct cdnsp_device *pdev;
|
|
struct cdnsp_ep *pep;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (!request || !ep)
|
|
return -EINVAL;
|
|
|
|
pep = to_cdnsp_ep(ep);
|
|
pdev = pep->pdev;
|
|
|
|
if (!(pep->ep_state & EP_ENABLED)) {
|
|
dev_err(pdev->dev, "%s: can't queue to disabled endpoint\n",
|
|
pep->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
preq = to_cdnsp_request(request);
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
ret = cdnsp_ep_enqueue(pep, preq);
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cdnsp_gadget_ep_dequeue(struct usb_ep *ep,
|
|
struct usb_request *request)
|
|
{
|
|
struct cdnsp_ep *pep = to_cdnsp_ep(ep);
|
|
struct cdnsp_device *pdev = pep->pdev;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (!pep->endpoint.desc) {
|
|
dev_err(pdev->dev,
|
|
"%s: can't dequeue to disabled endpoint\n",
|
|
pep->name);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
/* Requests has been dequeued during disabling endpoint. */
|
|
if (!(pep->ep_state & EP_ENABLED))
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
ret = cdnsp_ep_dequeue(pep, to_cdnsp_request(request));
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cdnsp_gadget_ep_set_halt(struct usb_ep *ep, int value)
|
|
{
|
|
struct cdnsp_ep *pep = to_cdnsp_ep(ep);
|
|
struct cdnsp_device *pdev = pep->pdev;
|
|
struct cdnsp_request *preq;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
|
|
preq = next_request(&pep->pending_list);
|
|
if (value) {
|
|
if (preq) {
|
|
trace_cdnsp_ep_busy_try_halt_again(pep, 0);
|
|
ret = -EAGAIN;
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
ret = cdnsp_halt_endpoint(pdev, pep, value);
|
|
|
|
done:
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int cdnsp_gadget_ep_set_wedge(struct usb_ep *ep)
|
|
{
|
|
struct cdnsp_ep *pep = to_cdnsp_ep(ep);
|
|
struct cdnsp_device *pdev = pep->pdev;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
pep->ep_state |= EP_WEDGE;
|
|
ret = cdnsp_halt_endpoint(pdev, pep, 1);
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct usb_ep_ops cdnsp_gadget_ep0_ops = {
|
|
.enable = cdnsp_gadget_ep_enable,
|
|
.disable = cdnsp_gadget_ep_disable,
|
|
.alloc_request = cdnsp_gadget_ep_alloc_request,
|
|
.free_request = cdnsp_gadget_ep_free_request,
|
|
.queue = cdnsp_gadget_ep_queue,
|
|
.dequeue = cdnsp_gadget_ep_dequeue,
|
|
.set_halt = cdnsp_gadget_ep_set_halt,
|
|
.set_wedge = cdnsp_gadget_ep_set_wedge,
|
|
};
|
|
|
|
static const struct usb_ep_ops cdnsp_gadget_ep_ops = {
|
|
.enable = cdnsp_gadget_ep_enable,
|
|
.disable = cdnsp_gadget_ep_disable,
|
|
.alloc_request = cdnsp_gadget_ep_alloc_request,
|
|
.free_request = cdnsp_gadget_ep_free_request,
|
|
.queue = cdnsp_gadget_ep_queue,
|
|
.dequeue = cdnsp_gadget_ep_dequeue,
|
|
.set_halt = cdnsp_gadget_ep_set_halt,
|
|
.set_wedge = cdnsp_gadget_ep_set_wedge,
|
|
};
|
|
|
|
void cdnsp_gadget_giveback(struct cdnsp_ep *pep,
|
|
struct cdnsp_request *preq,
|
|
int status)
|
|
{
|
|
struct cdnsp_device *pdev = pep->pdev;
|
|
|
|
list_del(&preq->list);
|
|
|
|
if (preq->request.status == -EINPROGRESS)
|
|
preq->request.status = status;
|
|
|
|
usb_gadget_unmap_request_by_dev(pdev->dev, &preq->request,
|
|
preq->direction);
|
|
|
|
trace_cdnsp_request_giveback(preq);
|
|
|
|
if (preq != &pdev->ep0_preq) {
|
|
spin_unlock(&pdev->lock);
|
|
usb_gadget_giveback_request(&pep->endpoint, &preq->request);
|
|
spin_lock(&pdev->lock);
|
|
}
|
|
}
|
|
|
|
static struct usb_endpoint_descriptor cdnsp_gadget_ep0_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
|
|
};
|
|
|
|
static int cdnsp_run(struct cdnsp_device *pdev,
|
|
enum usb_device_speed speed)
|
|
{
|
|
u32 fs_speed = 0;
|
|
u32 temp;
|
|
int ret;
|
|
|
|
temp = readl(&pdev->ir_set->irq_control);
|
|
temp &= ~IMOD_INTERVAL_MASK;
|
|
temp |= ((IMOD_DEFAULT_INTERVAL / 250) & IMOD_INTERVAL_MASK);
|
|
writel(temp, &pdev->ir_set->irq_control);
|
|
|
|
temp = readl(&pdev->port3x_regs->mode_addr);
|
|
|
|
switch (speed) {
|
|
case USB_SPEED_SUPER_PLUS:
|
|
temp |= CFG_3XPORT_SSP_SUPPORT;
|
|
break;
|
|
case USB_SPEED_SUPER:
|
|
temp &= ~CFG_3XPORT_SSP_SUPPORT;
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
break;
|
|
case USB_SPEED_FULL:
|
|
fs_speed = PORT_REG6_FORCE_FS;
|
|
break;
|
|
default:
|
|
dev_err(pdev->dev, "invalid maximum_speed parameter %d\n",
|
|
speed);
|
|
fallthrough;
|
|
case USB_SPEED_UNKNOWN:
|
|
/* Default to superspeed. */
|
|
speed = USB_SPEED_SUPER;
|
|
break;
|
|
}
|
|
|
|
if (speed >= USB_SPEED_SUPER) {
|
|
writel(temp, &pdev->port3x_regs->mode_addr);
|
|
cdnsp_set_link_state(pdev, &pdev->usb3_port.regs->portsc,
|
|
XDEV_RXDETECT);
|
|
} else {
|
|
cdnsp_disable_port(pdev, &pdev->usb3_port.regs->portsc);
|
|
}
|
|
|
|
cdnsp_set_link_state(pdev, &pdev->usb2_port.regs->portsc,
|
|
XDEV_RXDETECT);
|
|
|
|
cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
|
|
|
|
writel(PORT_REG6_L1_L0_HW_EN | fs_speed, &pdev->port20_regs->port_reg6);
|
|
|
|
ret = cdnsp_start(pdev);
|
|
if (ret) {
|
|
ret = -ENODEV;
|
|
goto err;
|
|
}
|
|
|
|
temp = readl(&pdev->op_regs->command);
|
|
temp |= (CMD_INTE);
|
|
writel(temp, &pdev->op_regs->command);
|
|
|
|
temp = readl(&pdev->ir_set->irq_pending);
|
|
writel(IMAN_IE_SET(temp), &pdev->ir_set->irq_pending);
|
|
|
|
trace_cdnsp_init("Controller ready to work");
|
|
return 0;
|
|
err:
|
|
cdnsp_halt(pdev);
|
|
return ret;
|
|
}
|
|
|
|
static int cdnsp_gadget_udc_start(struct usb_gadget *g,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
enum usb_device_speed max_speed = driver->max_speed;
|
|
struct cdnsp_device *pdev = gadget_to_cdnsp(g);
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
pdev->gadget_driver = driver;
|
|
|
|
/* limit speed if necessary */
|
|
max_speed = min(driver->max_speed, g->max_speed);
|
|
ret = cdnsp_run(pdev, max_speed);
|
|
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Update Event Ring Dequeue Pointer:
|
|
* - When all events have finished
|
|
* - To avoid "Event Ring Full Error" condition
|
|
*/
|
|
void cdnsp_update_erst_dequeue(struct cdnsp_device *pdev,
|
|
union cdnsp_trb *event_ring_deq,
|
|
u8 clear_ehb)
|
|
{
|
|
u64 temp_64;
|
|
dma_addr_t deq;
|
|
|
|
temp_64 = cdnsp_read_64(&pdev->ir_set->erst_dequeue);
|
|
|
|
/* If necessary, update the HW's version of the event ring deq ptr. */
|
|
if (event_ring_deq != pdev->event_ring->dequeue) {
|
|
deq = cdnsp_trb_virt_to_dma(pdev->event_ring->deq_seg,
|
|
pdev->event_ring->dequeue);
|
|
temp_64 &= ERST_PTR_MASK;
|
|
temp_64 |= ((u64)deq & (u64)~ERST_PTR_MASK);
|
|
}
|
|
|
|
/* Clear the event handler busy flag (RW1C). */
|
|
if (clear_ehb)
|
|
temp_64 |= ERST_EHB;
|
|
else
|
|
temp_64 &= ~ERST_EHB;
|
|
|
|
cdnsp_write_64(temp_64, &pdev->ir_set->erst_dequeue);
|
|
}
|
|
|
|
static void cdnsp_clear_cmd_ring(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_segment *seg;
|
|
u64 val_64;
|
|
int i;
|
|
|
|
cdnsp_initialize_ring_info(pdev->cmd_ring);
|
|
|
|
seg = pdev->cmd_ring->first_seg;
|
|
for (i = 0; i < pdev->cmd_ring->num_segs; i++) {
|
|
memset(seg->trbs, 0,
|
|
sizeof(union cdnsp_trb) * (TRBS_PER_SEGMENT - 1));
|
|
seg = seg->next;
|
|
}
|
|
|
|
/* Set the address in the Command Ring Control register. */
|
|
val_64 = cdnsp_read_64(&pdev->op_regs->cmd_ring);
|
|
val_64 = (val_64 & (u64)CMD_RING_RSVD_BITS) |
|
|
(pdev->cmd_ring->first_seg->dma & (u64)~CMD_RING_RSVD_BITS) |
|
|
pdev->cmd_ring->cycle_state;
|
|
cdnsp_write_64(val_64, &pdev->op_regs->cmd_ring);
|
|
}
|
|
|
|
static void cdnsp_consume_all_events(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_segment *event_deq_seg;
|
|
union cdnsp_trb *event_ring_deq;
|
|
union cdnsp_trb *event;
|
|
u32 cycle_bit;
|
|
|
|
event_ring_deq = pdev->event_ring->dequeue;
|
|
event_deq_seg = pdev->event_ring->deq_seg;
|
|
event = pdev->event_ring->dequeue;
|
|
|
|
/* Update ring dequeue pointer. */
|
|
while (1) {
|
|
cycle_bit = (le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE);
|
|
|
|
/* Does the controller or driver own the TRB? */
|
|
if (cycle_bit != pdev->event_ring->cycle_state)
|
|
break;
|
|
|
|
cdnsp_inc_deq(pdev, pdev->event_ring);
|
|
|
|
if (!cdnsp_last_trb_on_seg(event_deq_seg, event)) {
|
|
event++;
|
|
continue;
|
|
}
|
|
|
|
if (cdnsp_last_trb_on_ring(pdev->event_ring, event_deq_seg,
|
|
event))
|
|
cycle_bit ^= 1;
|
|
|
|
event_deq_seg = event_deq_seg->next;
|
|
event = event_deq_seg->trbs;
|
|
}
|
|
|
|
cdnsp_update_erst_dequeue(pdev, event_ring_deq, 1);
|
|
}
|
|
|
|
static void cdnsp_stop(struct cdnsp_device *pdev)
|
|
{
|
|
u32 temp;
|
|
|
|
cdnsp_cmd_flush_ep(pdev, &pdev->eps[0]);
|
|
|
|
/* Remove internally queued request for ep0. */
|
|
if (!list_empty(&pdev->eps[0].pending_list)) {
|
|
struct cdnsp_request *req;
|
|
|
|
req = next_request(&pdev->eps[0].pending_list);
|
|
if (req == &pdev->ep0_preq)
|
|
cdnsp_ep_dequeue(&pdev->eps[0], req);
|
|
}
|
|
|
|
cdnsp_disable_port(pdev, &pdev->usb2_port.regs->portsc);
|
|
cdnsp_disable_port(pdev, &pdev->usb3_port.regs->portsc);
|
|
cdnsp_disable_slot(pdev);
|
|
cdnsp_halt(pdev);
|
|
|
|
temp = readl(&pdev->op_regs->status);
|
|
writel((temp & ~0x1fff) | STS_EINT, &pdev->op_regs->status);
|
|
temp = readl(&pdev->ir_set->irq_pending);
|
|
writel(IMAN_IE_CLEAR(temp), &pdev->ir_set->irq_pending);
|
|
|
|
cdnsp_clear_port_change_bit(pdev, &pdev->usb2_port.regs->portsc);
|
|
cdnsp_clear_port_change_bit(pdev, &pdev->usb3_port.regs->portsc);
|
|
|
|
/* Clear interrupt line */
|
|
temp = readl(&pdev->ir_set->irq_pending);
|
|
temp |= IMAN_IP;
|
|
writel(temp, &pdev->ir_set->irq_pending);
|
|
|
|
cdnsp_consume_all_events(pdev);
|
|
cdnsp_clear_cmd_ring(pdev);
|
|
|
|
trace_cdnsp_exit("Controller stopped.");
|
|
}
|
|
|
|
/*
|
|
* Stop controller.
|
|
* This function is called by the gadget core when the driver is removed.
|
|
* Disable slot, disable IRQs, and quiesce the controller.
|
|
*/
|
|
static int cdnsp_gadget_udc_stop(struct usb_gadget *g)
|
|
{
|
|
struct cdnsp_device *pdev = gadget_to_cdnsp(g);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
cdnsp_stop(pdev);
|
|
pdev->gadget_driver = NULL;
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdnsp_gadget_get_frame(struct usb_gadget *g)
|
|
{
|
|
struct cdnsp_device *pdev = gadget_to_cdnsp(g);
|
|
|
|
return cdnsp_get_frame(pdev);
|
|
}
|
|
|
|
static void __cdnsp_gadget_wakeup(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_port_regs __iomem *port_regs;
|
|
u32 portpm, portsc;
|
|
|
|
port_regs = pdev->active_port->regs;
|
|
portsc = readl(&port_regs->portsc) & PORT_PLS_MASK;
|
|
|
|
/* Remote wakeup feature is not enabled by host. */
|
|
if (pdev->gadget.speed < USB_SPEED_SUPER && portsc == XDEV_U2) {
|
|
portpm = readl(&port_regs->portpmsc);
|
|
|
|
if (!(portpm & PORT_RWE))
|
|
return;
|
|
}
|
|
|
|
if (portsc == XDEV_U3 && !pdev->may_wakeup)
|
|
return;
|
|
|
|
cdnsp_set_link_state(pdev, &port_regs->portsc, XDEV_U0);
|
|
|
|
pdev->cdnsp_state |= CDNSP_WAKEUP_PENDING;
|
|
}
|
|
|
|
static int cdnsp_gadget_wakeup(struct usb_gadget *g)
|
|
{
|
|
struct cdnsp_device *pdev = gadget_to_cdnsp(g);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
__cdnsp_gadget_wakeup(pdev);
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdnsp_gadget_set_selfpowered(struct usb_gadget *g,
|
|
int is_selfpowered)
|
|
{
|
|
struct cdnsp_device *pdev = gadget_to_cdnsp(g);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
g->is_selfpowered = !!is_selfpowered;
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdnsp_gadget_pullup(struct usb_gadget *gadget, int is_on)
|
|
{
|
|
struct cdnsp_device *pdev = gadget_to_cdnsp(gadget);
|
|
struct cdns *cdns = dev_get_drvdata(pdev->dev);
|
|
unsigned long flags;
|
|
|
|
trace_cdnsp_pullup(is_on);
|
|
|
|
/*
|
|
* Disable events handling while controller is being
|
|
* enabled/disabled.
|
|
*/
|
|
disable_irq(cdns->dev_irq);
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
|
|
if (!is_on) {
|
|
cdnsp_reset_device(pdev);
|
|
cdns_clear_vbus(cdns);
|
|
} else {
|
|
cdns_set_vbus(cdns);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
enable_irq(cdns->dev_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct usb_gadget_ops cdnsp_gadget_ops = {
|
|
.get_frame = cdnsp_gadget_get_frame,
|
|
.wakeup = cdnsp_gadget_wakeup,
|
|
.set_selfpowered = cdnsp_gadget_set_selfpowered,
|
|
.pullup = cdnsp_gadget_pullup,
|
|
.udc_start = cdnsp_gadget_udc_start,
|
|
.udc_stop = cdnsp_gadget_udc_stop,
|
|
};
|
|
|
|
static void cdnsp_get_ep_buffering(struct cdnsp_device *pdev,
|
|
struct cdnsp_ep *pep)
|
|
{
|
|
void __iomem *reg = &pdev->cap_regs->hc_capbase;
|
|
int endpoints;
|
|
|
|
reg += cdnsp_find_next_ext_cap(reg, 0, XBUF_CAP_ID);
|
|
|
|
if (!pep->direction) {
|
|
pep->buffering = readl(reg + XBUF_RX_TAG_MASK_0_OFFSET);
|
|
pep->buffering_period = readl(reg + XBUF_RX_TAG_MASK_1_OFFSET);
|
|
pep->buffering = (pep->buffering + 1) / 2;
|
|
pep->buffering_period = (pep->buffering_period + 1) / 2;
|
|
return;
|
|
}
|
|
|
|
endpoints = HCS_ENDPOINTS(pdev->hcs_params1) / 2;
|
|
|
|
/* Set to XBUF_TX_TAG_MASK_0 register. */
|
|
reg += XBUF_TX_CMD_OFFSET + (endpoints * 2 + 2) * sizeof(u32);
|
|
/* Set reg to XBUF_TX_TAG_MASK_N related with this endpoint. */
|
|
reg += pep->number * sizeof(u32) * 2;
|
|
|
|
pep->buffering = (readl(reg) + 1) / 2;
|
|
pep->buffering_period = pep->buffering;
|
|
}
|
|
|
|
static int cdnsp_gadget_init_endpoints(struct cdnsp_device *pdev)
|
|
{
|
|
int max_streams = HCC_MAX_PSA(pdev->hcc_params);
|
|
struct cdnsp_ep *pep;
|
|
int i;
|
|
|
|
INIT_LIST_HEAD(&pdev->gadget.ep_list);
|
|
|
|
if (max_streams < STREAM_LOG_STREAMS) {
|
|
dev_err(pdev->dev, "Stream size %d not supported\n",
|
|
max_streams);
|
|
return -EINVAL;
|
|
}
|
|
|
|
max_streams = STREAM_LOG_STREAMS;
|
|
|
|
for (i = 0; i < CDNSP_ENDPOINTS_NUM; i++) {
|
|
bool direction = !(i & 1); /* Start from OUT endpoint. */
|
|
u8 epnum = ((i + 1) >> 1);
|
|
|
|
if (!CDNSP_IF_EP_EXIST(pdev, epnum, direction))
|
|
continue;
|
|
|
|
pep = &pdev->eps[i];
|
|
pep->pdev = pdev;
|
|
pep->number = epnum;
|
|
pep->direction = direction; /* 0 for OUT, 1 for IN. */
|
|
|
|
/*
|
|
* Ep0 is bidirectional, so ep0in and ep0out are represented by
|
|
* pdev->eps[0]
|
|
*/
|
|
if (epnum == 0) {
|
|
snprintf(pep->name, sizeof(pep->name), "ep%d%s",
|
|
epnum, "BiDir");
|
|
|
|
pep->idx = 0;
|
|
usb_ep_set_maxpacket_limit(&pep->endpoint, 512);
|
|
pep->endpoint.maxburst = 1;
|
|
pep->endpoint.ops = &cdnsp_gadget_ep0_ops;
|
|
pep->endpoint.desc = &cdnsp_gadget_ep0_desc;
|
|
pep->endpoint.comp_desc = NULL;
|
|
pep->endpoint.caps.type_control = true;
|
|
pep->endpoint.caps.dir_in = true;
|
|
pep->endpoint.caps.dir_out = true;
|
|
|
|
pdev->ep0_preq.epnum = pep->number;
|
|
pdev->ep0_preq.pep = pep;
|
|
pdev->gadget.ep0 = &pep->endpoint;
|
|
} else {
|
|
snprintf(pep->name, sizeof(pep->name), "ep%d%s",
|
|
epnum, (pep->direction) ? "in" : "out");
|
|
|
|
pep->idx = (epnum * 2 + (direction ? 1 : 0)) - 1;
|
|
usb_ep_set_maxpacket_limit(&pep->endpoint, 1024);
|
|
|
|
pep->endpoint.max_streams = max_streams;
|
|
pep->endpoint.ops = &cdnsp_gadget_ep_ops;
|
|
list_add_tail(&pep->endpoint.ep_list,
|
|
&pdev->gadget.ep_list);
|
|
|
|
pep->endpoint.caps.type_iso = true;
|
|
pep->endpoint.caps.type_bulk = true;
|
|
pep->endpoint.caps.type_int = true;
|
|
|
|
pep->endpoint.caps.dir_in = direction;
|
|
pep->endpoint.caps.dir_out = !direction;
|
|
}
|
|
|
|
pep->endpoint.name = pep->name;
|
|
pep->in_ctx = cdnsp_get_ep_ctx(&pdev->in_ctx, pep->idx);
|
|
pep->out_ctx = cdnsp_get_ep_ctx(&pdev->out_ctx, pep->idx);
|
|
cdnsp_get_ep_buffering(pdev, pep);
|
|
|
|
dev_dbg(pdev->dev, "Init %s, MPS: %04x SupType: "
|
|
"CTRL: %s, INT: %s, BULK: %s, ISOC %s, "
|
|
"SupDir IN: %s, OUT: %s\n",
|
|
pep->name, 1024,
|
|
(pep->endpoint.caps.type_control) ? "yes" : "no",
|
|
(pep->endpoint.caps.type_int) ? "yes" : "no",
|
|
(pep->endpoint.caps.type_bulk) ? "yes" : "no",
|
|
(pep->endpoint.caps.type_iso) ? "yes" : "no",
|
|
(pep->endpoint.caps.dir_in) ? "yes" : "no",
|
|
(pep->endpoint.caps.dir_out) ? "yes" : "no");
|
|
|
|
INIT_LIST_HEAD(&pep->pending_list);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cdnsp_gadget_free_endpoints(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_ep *pep;
|
|
int i;
|
|
|
|
for (i = 0; i < CDNSP_ENDPOINTS_NUM; i++) {
|
|
pep = &pdev->eps[i];
|
|
if (pep->number != 0 && pep->out_ctx)
|
|
list_del(&pep->endpoint.ep_list);
|
|
}
|
|
}
|
|
|
|
void cdnsp_disconnect_gadget(struct cdnsp_device *pdev)
|
|
{
|
|
pdev->cdnsp_state |= CDNSP_STATE_DISCONNECT_PENDING;
|
|
|
|
if (pdev->gadget_driver && pdev->gadget_driver->disconnect) {
|
|
spin_unlock(&pdev->lock);
|
|
pdev->gadget_driver->disconnect(&pdev->gadget);
|
|
spin_lock(&pdev->lock);
|
|
}
|
|
|
|
pdev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
usb_gadget_set_state(&pdev->gadget, USB_STATE_NOTATTACHED);
|
|
|
|
pdev->cdnsp_state &= ~CDNSP_STATE_DISCONNECT_PENDING;
|
|
}
|
|
|
|
void cdnsp_suspend_gadget(struct cdnsp_device *pdev)
|
|
{
|
|
if (pdev->gadget_driver && pdev->gadget_driver->suspend) {
|
|
spin_unlock(&pdev->lock);
|
|
pdev->gadget_driver->suspend(&pdev->gadget);
|
|
spin_lock(&pdev->lock);
|
|
}
|
|
}
|
|
|
|
void cdnsp_resume_gadget(struct cdnsp_device *pdev)
|
|
{
|
|
if (pdev->gadget_driver && pdev->gadget_driver->resume) {
|
|
spin_unlock(&pdev->lock);
|
|
pdev->gadget_driver->resume(&pdev->gadget);
|
|
spin_lock(&pdev->lock);
|
|
}
|
|
}
|
|
|
|
void cdnsp_irq_reset(struct cdnsp_device *pdev)
|
|
{
|
|
struct cdnsp_port_regs __iomem *port_regs;
|
|
|
|
cdnsp_reset_device(pdev);
|
|
|
|
port_regs = pdev->active_port->regs;
|
|
pdev->gadget.speed = cdnsp_port_speed(readl(port_regs));
|
|
|
|
spin_unlock(&pdev->lock);
|
|
usb_gadget_udc_reset(&pdev->gadget, pdev->gadget_driver);
|
|
spin_lock(&pdev->lock);
|
|
|
|
switch (pdev->gadget.speed) {
|
|
case USB_SPEED_SUPER_PLUS:
|
|
case USB_SPEED_SUPER:
|
|
cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
|
|
pdev->gadget.ep0->maxpacket = 512;
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
case USB_SPEED_FULL:
|
|
cdnsp_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
|
|
pdev->gadget.ep0->maxpacket = 64;
|
|
break;
|
|
default:
|
|
/* Low speed is not supported. */
|
|
dev_err(pdev->dev, "Unknown device speed\n");
|
|
break;
|
|
}
|
|
|
|
cdnsp_clear_chicken_bits_2(pdev, CHICKEN_XDMA_2_TP_CACHE_DIS);
|
|
cdnsp_setup_device(pdev, SETUP_CONTEXT_ONLY);
|
|
usb_gadget_set_state(&pdev->gadget, USB_STATE_DEFAULT);
|
|
}
|
|
|
|
static void cdnsp_get_rev_cap(struct cdnsp_device *pdev)
|
|
{
|
|
void __iomem *reg = &pdev->cap_regs->hc_capbase;
|
|
|
|
reg += cdnsp_find_next_ext_cap(reg, 0, RTL_REV_CAP);
|
|
pdev->rev_cap = reg;
|
|
|
|
dev_info(pdev->dev, "Rev: %08x/%08x, eps: %08x, buff: %08x/%08x\n",
|
|
readl(&pdev->rev_cap->ctrl_revision),
|
|
readl(&pdev->rev_cap->rtl_revision),
|
|
readl(&pdev->rev_cap->ep_supported),
|
|
readl(&pdev->rev_cap->rx_buff_size),
|
|
readl(&pdev->rev_cap->tx_buff_size));
|
|
}
|
|
|
|
static int cdnsp_gen_setup(struct cdnsp_device *pdev)
|
|
{
|
|
int ret;
|
|
u32 reg;
|
|
|
|
pdev->cap_regs = pdev->regs;
|
|
pdev->op_regs = pdev->regs +
|
|
HC_LENGTH(readl(&pdev->cap_regs->hc_capbase));
|
|
pdev->run_regs = pdev->regs +
|
|
(readl(&pdev->cap_regs->run_regs_off) & RTSOFF_MASK);
|
|
|
|
/* Cache read-only capability registers */
|
|
pdev->hcs_params1 = readl(&pdev->cap_regs->hcs_params1);
|
|
pdev->hcc_params = readl(&pdev->cap_regs->hc_capbase);
|
|
pdev->hci_version = HC_VERSION(pdev->hcc_params);
|
|
pdev->hcc_params = readl(&pdev->cap_regs->hcc_params);
|
|
|
|
cdnsp_get_rev_cap(pdev);
|
|
|
|
/* Make sure the Device Controller is halted. */
|
|
ret = cdnsp_halt(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Reset the internal controller memory state and registers. */
|
|
ret = cdnsp_reset(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Set dma_mask and coherent_dma_mask to 64-bits,
|
|
* if controller supports 64-bit addressing.
|
|
*/
|
|
if (HCC_64BIT_ADDR(pdev->hcc_params) &&
|
|
!dma_set_mask(pdev->dev, DMA_BIT_MASK(64))) {
|
|
dev_dbg(pdev->dev, "Enabling 64-bit DMA addresses.\n");
|
|
dma_set_coherent_mask(pdev->dev, DMA_BIT_MASK(64));
|
|
} else {
|
|
/*
|
|
* This is to avoid error in cases where a 32-bit USB
|
|
* controller is used on a 64-bit capable system.
|
|
*/
|
|
ret = dma_set_mask(pdev->dev, DMA_BIT_MASK(32));
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(pdev->dev, "Enabling 32-bit DMA addresses.\n");
|
|
dma_set_coherent_mask(pdev->dev, DMA_BIT_MASK(32));
|
|
}
|
|
|
|
spin_lock_init(&pdev->lock);
|
|
|
|
ret = cdnsp_mem_init(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Software workaround for U1: after transition
|
|
* to U1 the controller starts gating clock, and in some cases,
|
|
* it causes that controller stack.
|
|
*/
|
|
reg = readl(&pdev->port3x_regs->mode_2);
|
|
reg &= ~CFG_3XPORT_U1_PIPE_CLK_GATE_EN;
|
|
writel(reg, &pdev->port3x_regs->mode_2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __cdnsp_gadget_init(struct cdns *cdns)
|
|
{
|
|
struct cdnsp_device *pdev;
|
|
u32 max_speed;
|
|
int ret = -ENOMEM;
|
|
|
|
cdns_drd_gadget_on(cdns);
|
|
|
|
pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
|
|
if (!pdev)
|
|
return -ENOMEM;
|
|
|
|
pm_runtime_get_sync(cdns->dev);
|
|
|
|
cdns->gadget_dev = pdev;
|
|
pdev->dev = cdns->dev;
|
|
pdev->regs = cdns->dev_regs;
|
|
max_speed = usb_get_maximum_speed(cdns->dev);
|
|
|
|
switch (max_speed) {
|
|
case USB_SPEED_FULL:
|
|
case USB_SPEED_HIGH:
|
|
case USB_SPEED_SUPER:
|
|
case USB_SPEED_SUPER_PLUS:
|
|
break;
|
|
default:
|
|
dev_err(cdns->dev, "invalid speed parameter %d\n", max_speed);
|
|
fallthrough;
|
|
case USB_SPEED_UNKNOWN:
|
|
/* Default to SSP */
|
|
max_speed = USB_SPEED_SUPER_PLUS;
|
|
break;
|
|
}
|
|
|
|
pdev->gadget.ops = &cdnsp_gadget_ops;
|
|
pdev->gadget.name = "cdnsp-gadget";
|
|
pdev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
pdev->gadget.sg_supported = 1;
|
|
pdev->gadget.max_speed = max_speed;
|
|
pdev->gadget.lpm_capable = 1;
|
|
|
|
pdev->setup_buf = kzalloc(CDNSP_EP0_SETUP_SIZE, GFP_KERNEL);
|
|
if (!pdev->setup_buf)
|
|
goto free_pdev;
|
|
|
|
/*
|
|
* Controller supports not aligned buffer but it should improve
|
|
* performance.
|
|
*/
|
|
pdev->gadget.quirk_ep_out_aligned_size = true;
|
|
|
|
ret = cdnsp_gen_setup(pdev);
|
|
if (ret) {
|
|
dev_err(pdev->dev, "Generic initialization failed %d\n", ret);
|
|
goto free_setup;
|
|
}
|
|
|
|
ret = cdnsp_gadget_init_endpoints(pdev);
|
|
if (ret) {
|
|
dev_err(pdev->dev, "failed to initialize endpoints\n");
|
|
goto halt_pdev;
|
|
}
|
|
|
|
ret = usb_add_gadget_udc(pdev->dev, &pdev->gadget);
|
|
if (ret) {
|
|
dev_err(pdev->dev, "failed to register udc\n");
|
|
goto free_endpoints;
|
|
}
|
|
|
|
ret = devm_request_threaded_irq(pdev->dev, cdns->dev_irq,
|
|
cdnsp_irq_handler,
|
|
cdnsp_thread_irq_handler, IRQF_SHARED,
|
|
dev_name(pdev->dev), pdev);
|
|
if (ret)
|
|
goto del_gadget;
|
|
|
|
return 0;
|
|
|
|
del_gadget:
|
|
usb_del_gadget_udc(&pdev->gadget);
|
|
free_endpoints:
|
|
cdnsp_gadget_free_endpoints(pdev);
|
|
halt_pdev:
|
|
cdnsp_halt(pdev);
|
|
cdnsp_reset(pdev);
|
|
cdnsp_mem_cleanup(pdev);
|
|
free_setup:
|
|
kfree(pdev->setup_buf);
|
|
free_pdev:
|
|
kfree(pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void cdnsp_gadget_exit(struct cdns *cdns)
|
|
{
|
|
struct cdnsp_device *pdev = cdns->gadget_dev;
|
|
|
|
devm_free_irq(pdev->dev, cdns->dev_irq, pdev);
|
|
pm_runtime_mark_last_busy(cdns->dev);
|
|
pm_runtime_put_autosuspend(cdns->dev);
|
|
usb_del_gadget_udc(&pdev->gadget);
|
|
cdnsp_gadget_free_endpoints(pdev);
|
|
cdnsp_mem_cleanup(pdev);
|
|
kfree(pdev);
|
|
cdns->gadget_dev = NULL;
|
|
cdns_drd_gadget_off(cdns);
|
|
}
|
|
|
|
static int cdnsp_gadget_suspend(struct cdns *cdns, bool do_wakeup)
|
|
{
|
|
struct cdnsp_device *pdev = cdns->gadget_dev;
|
|
unsigned long flags;
|
|
|
|
if (pdev->link_state == XDEV_U3)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
cdnsp_disconnect_gadget(pdev);
|
|
cdnsp_stop(pdev);
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdnsp_gadget_resume(struct cdns *cdns, bool hibernated)
|
|
{
|
|
struct cdnsp_device *pdev = cdns->gadget_dev;
|
|
enum usb_device_speed max_speed;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (!pdev->gadget_driver)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&pdev->lock, flags);
|
|
max_speed = pdev->gadget_driver->max_speed;
|
|
|
|
/* Limit speed if necessary. */
|
|
max_speed = min(max_speed, pdev->gadget.max_speed);
|
|
|
|
ret = cdnsp_run(pdev, max_speed);
|
|
|
|
if (pdev->link_state == XDEV_U3)
|
|
__cdnsp_gadget_wakeup(pdev);
|
|
|
|
spin_unlock_irqrestore(&pdev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdnsp_gadget_init - initialize device structure
|
|
* @cdns: cdnsp instance
|
|
*
|
|
* This function initializes the gadget.
|
|
*/
|
|
int cdnsp_gadget_init(struct cdns *cdns)
|
|
{
|
|
struct cdns_role_driver *rdrv;
|
|
|
|
rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
|
|
if (!rdrv)
|
|
return -ENOMEM;
|
|
|
|
rdrv->start = __cdnsp_gadget_init;
|
|
rdrv->stop = cdnsp_gadget_exit;
|
|
rdrv->suspend = cdnsp_gadget_suspend;
|
|
rdrv->resume = cdnsp_gadget_resume;
|
|
rdrv->state = CDNS_ROLE_STATE_INACTIVE;
|
|
rdrv->name = "gadget";
|
|
cdns->roles[USB_ROLE_DEVICE] = rdrv;
|
|
|
|
return 0;
|
|
}
|