1212 lines
32 KiB
C
1212 lines
32 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// Driver for Microchip S/PDIF RX Controller
|
|
//
|
|
// Copyright (C) 2020 Microchip Technology Inc. and its subsidiaries
|
|
//
|
|
// Author: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <sound/dmaengine_pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
|
|
/*
|
|
* ---- S/PDIF Receiver Controller Register map ----
|
|
*/
|
|
#define SPDIFRX_CR 0x00 /* Control Register */
|
|
#define SPDIFRX_MR 0x04 /* Mode Register */
|
|
|
|
#define SPDIFRX_IER 0x10 /* Interrupt Enable Register */
|
|
#define SPDIFRX_IDR 0x14 /* Interrupt Disable Register */
|
|
#define SPDIFRX_IMR 0x18 /* Interrupt Mask Register */
|
|
#define SPDIFRX_ISR 0x1c /* Interrupt Status Register */
|
|
#define SPDIFRX_RSR 0x20 /* Status Register */
|
|
#define SPDIFRX_RHR 0x24 /* Holding Register */
|
|
|
|
#define SPDIFRX_CHSR(channel, reg) \
|
|
(0x30 + (channel) * 0x30 + (reg) * 4) /* Channel x Status Registers */
|
|
|
|
#define SPDIFRX_CHUD(channel, reg) \
|
|
(0x48 + (channel) * 0x30 + (reg) * 4) /* Channel x User Data Registers */
|
|
|
|
#define SPDIFRX_WPMR 0xE4 /* Write Protection Mode Register */
|
|
#define SPDIFRX_WPSR 0xE8 /* Write Protection Status Register */
|
|
|
|
#define SPDIFRX_VERSION 0xFC /* Version Register */
|
|
|
|
/*
|
|
* ---- Control Register (Write-only) ----
|
|
*/
|
|
#define SPDIFRX_CR_SWRST BIT(0) /* Software Reset */
|
|
|
|
/*
|
|
* ---- Mode Register (Read/Write) ----
|
|
*/
|
|
/* Receive Enable */
|
|
#define SPDIFRX_MR_RXEN_MASK GENMASK(0, 0)
|
|
#define SPDIFRX_MR_RXEN_DISABLE (0 << 0) /* SPDIF Receiver Disabled */
|
|
#define SPDIFRX_MR_RXEN_ENABLE (1 << 0) /* SPDIF Receiver Enabled */
|
|
|
|
/* Validity Bit Mode */
|
|
#define SPDIFRX_MR_VBMODE_MASK GENAMSK(1, 1)
|
|
#define SPDIFRX_MR_VBMODE_ALWAYS_LOAD \
|
|
(0 << 1) /* Load sample regardless of validity bit value */
|
|
#define SPDIFRX_MR_VBMODE_DISCARD_IF_VB1 \
|
|
(1 << 1) /* Load sample only if validity bit is 0 */
|
|
|
|
/* Data Word Endian Mode */
|
|
#define SPDIFRX_MR_ENDIAN_MASK GENMASK(2, 2)
|
|
#define SPDIFRX_MR_ENDIAN_LITTLE (0 << 2) /* Little Endian Mode */
|
|
#define SPDIFRX_MR_ENDIAN_BIG (1 << 2) /* Big Endian Mode */
|
|
|
|
/* Parity Bit Mode */
|
|
#define SPDIFRX_MR_PBMODE_MASK GENMASK(3, 3)
|
|
#define SPDIFRX_MR_PBMODE_PARCHECK (0 << 3) /* Parity Check Enabled */
|
|
#define SPDIFRX_MR_PBMODE_NOPARCHECK (1 << 3) /* Parity Check Disabled */
|
|
|
|
/* Sample Data Width */
|
|
#define SPDIFRX_MR_DATAWIDTH_MASK GENMASK(5, 4)
|
|
#define SPDIFRX_MR_DATAWIDTH(width) \
|
|
(((6 - (width) / 4) << 4) & SPDIFRX_MR_DATAWIDTH_MASK)
|
|
|
|
/* Packed Data Mode in Receive Holding Register */
|
|
#define SPDIFRX_MR_PACK_MASK GENMASK(7, 7)
|
|
#define SPDIFRX_MR_PACK_DISABLED (0 << 7)
|
|
#define SPDIFRX_MR_PACK_ENABLED (1 << 7)
|
|
|
|
/* Start of Block Bit Mode */
|
|
#define SPDIFRX_MR_SBMODE_MASK GENMASK(8, 8)
|
|
#define SPDIFRX_MR_SBMODE_ALWAYS_LOAD (0 << 8)
|
|
#define SPDIFRX_MR_SBMODE_DISCARD (1 << 8)
|
|
|
|
/* Consecutive Preamble Error Threshold Automatic Restart */
|
|
#define SPDIFRX_MR_AUTORST_MASK GENMASK(24, 24)
|
|
#define SPDIFRX_MR_AUTORST_NOACTION (0 << 24)
|
|
#define SPDIFRX_MR_AUTORST_UNLOCK_ON_PRE_ERR (1 << 24)
|
|
|
|
/*
|
|
* ---- Interrupt Enable/Disable/Mask/Status Register (Write/Read-only) ----
|
|
*/
|
|
#define SPDIFRX_IR_RXRDY BIT(0)
|
|
#define SPDIFRX_IR_LOCKED BIT(1)
|
|
#define SPDIFRX_IR_LOSS BIT(2)
|
|
#define SPDIFRX_IR_BLOCKEND BIT(3)
|
|
#define SPDIFRX_IR_SFE BIT(4)
|
|
#define SPDIFRX_IR_PAR_ERR BIT(5)
|
|
#define SPDIFRX_IR_OVERRUN BIT(6)
|
|
#define SPDIFRX_IR_RXFULL BIT(7)
|
|
#define SPDIFRX_IR_CSC(ch) BIT((ch) + 8)
|
|
#define SPDIFRX_IR_SECE BIT(10)
|
|
#define SPDIFRX_IR_BLOCKST BIT(11)
|
|
#define SPDIFRX_IR_NRZ_ERR BIT(12)
|
|
#define SPDIFRX_IR_PRE_ERR BIT(13)
|
|
#define SPDIFRX_IR_CP_ERR BIT(14)
|
|
|
|
/*
|
|
* ---- Receiver Status Register (Read/Write) ----
|
|
*/
|
|
/* Enable Status */
|
|
#define SPDIFRX_RSR_ULOCK BIT(0)
|
|
#define SPDIFRX_RSR_BADF BIT(1)
|
|
#define SPDIFRX_RSR_LOWF BIT(2)
|
|
#define SPDIFRX_RSR_NOSIGNAL BIT(3)
|
|
#define SPDIFRX_RSR_IFS_MASK GENMASK(27, 16)
|
|
#define SPDIFRX_RSR_IFS(reg) \
|
|
(((reg) & SPDIFRX_RSR_IFS_MASK) >> 16)
|
|
|
|
/*
|
|
* ---- Version Register (Read-only) ----
|
|
*/
|
|
#define SPDIFRX_VERSION_MASK GENMASK(11, 0)
|
|
#define SPDIFRX_VERSION_MFN_MASK GENMASK(18, 16)
|
|
#define SPDIFRX_VERSION_MFN(reg) (((reg) & SPDIFRX_VERSION_MFN_MASK) >> 16)
|
|
|
|
static bool mchp_spdifrx_readable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case SPDIFRX_MR:
|
|
case SPDIFRX_IMR:
|
|
case SPDIFRX_ISR:
|
|
case SPDIFRX_RSR:
|
|
case SPDIFRX_CHSR(0, 0):
|
|
case SPDIFRX_CHSR(0, 1):
|
|
case SPDIFRX_CHSR(0, 2):
|
|
case SPDIFRX_CHSR(0, 3):
|
|
case SPDIFRX_CHSR(0, 4):
|
|
case SPDIFRX_CHSR(0, 5):
|
|
case SPDIFRX_CHUD(0, 0):
|
|
case SPDIFRX_CHUD(0, 1):
|
|
case SPDIFRX_CHUD(0, 2):
|
|
case SPDIFRX_CHUD(0, 3):
|
|
case SPDIFRX_CHUD(0, 4):
|
|
case SPDIFRX_CHUD(0, 5):
|
|
case SPDIFRX_CHSR(1, 0):
|
|
case SPDIFRX_CHSR(1, 1):
|
|
case SPDIFRX_CHSR(1, 2):
|
|
case SPDIFRX_CHSR(1, 3):
|
|
case SPDIFRX_CHSR(1, 4):
|
|
case SPDIFRX_CHSR(1, 5):
|
|
case SPDIFRX_CHUD(1, 0):
|
|
case SPDIFRX_CHUD(1, 1):
|
|
case SPDIFRX_CHUD(1, 2):
|
|
case SPDIFRX_CHUD(1, 3):
|
|
case SPDIFRX_CHUD(1, 4):
|
|
case SPDIFRX_CHUD(1, 5):
|
|
case SPDIFRX_WPMR:
|
|
case SPDIFRX_WPSR:
|
|
case SPDIFRX_VERSION:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mchp_spdifrx_writeable_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case SPDIFRX_CR:
|
|
case SPDIFRX_MR:
|
|
case SPDIFRX_IER:
|
|
case SPDIFRX_IDR:
|
|
case SPDIFRX_WPMR:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mchp_spdifrx_precious_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case SPDIFRX_ISR:
|
|
case SPDIFRX_RHR:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool mchp_spdifrx_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case SPDIFRX_IMR:
|
|
case SPDIFRX_ISR:
|
|
case SPDIFRX_RSR:
|
|
case SPDIFRX_CHSR(0, 0):
|
|
case SPDIFRX_CHSR(0, 1):
|
|
case SPDIFRX_CHSR(0, 2):
|
|
case SPDIFRX_CHSR(0, 3):
|
|
case SPDIFRX_CHSR(0, 4):
|
|
case SPDIFRX_CHSR(0, 5):
|
|
case SPDIFRX_CHUD(0, 0):
|
|
case SPDIFRX_CHUD(0, 1):
|
|
case SPDIFRX_CHUD(0, 2):
|
|
case SPDIFRX_CHUD(0, 3):
|
|
case SPDIFRX_CHUD(0, 4):
|
|
case SPDIFRX_CHUD(0, 5):
|
|
case SPDIFRX_CHSR(1, 0):
|
|
case SPDIFRX_CHSR(1, 1):
|
|
case SPDIFRX_CHSR(1, 2):
|
|
case SPDIFRX_CHSR(1, 3):
|
|
case SPDIFRX_CHSR(1, 4):
|
|
case SPDIFRX_CHSR(1, 5):
|
|
case SPDIFRX_CHUD(1, 0):
|
|
case SPDIFRX_CHUD(1, 1):
|
|
case SPDIFRX_CHUD(1, 2):
|
|
case SPDIFRX_CHUD(1, 3):
|
|
case SPDIFRX_CHUD(1, 4):
|
|
case SPDIFRX_CHUD(1, 5):
|
|
case SPDIFRX_VERSION:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config mchp_spdifrx_regmap_config = {
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
.max_register = SPDIFRX_VERSION,
|
|
.readable_reg = mchp_spdifrx_readable_reg,
|
|
.writeable_reg = mchp_spdifrx_writeable_reg,
|
|
.precious_reg = mchp_spdifrx_precious_reg,
|
|
.volatile_reg = mchp_spdifrx_volatile_reg,
|
|
.cache_type = REGCACHE_FLAT,
|
|
};
|
|
|
|
#define SPDIFRX_GCLK_RATIO_MIN (12 * 64)
|
|
|
|
#define SPDIFRX_CS_BITS 192
|
|
#define SPDIFRX_UD_BITS 192
|
|
|
|
#define SPDIFRX_CHANNELS 2
|
|
|
|
/**
|
|
* struct mchp_spdifrx_ch_stat: MCHP SPDIFRX channel status
|
|
* @data: channel status bits
|
|
* @done: completion to signal channel status bits acquisition done
|
|
*/
|
|
struct mchp_spdifrx_ch_stat {
|
|
unsigned char data[SPDIFRX_CS_BITS / 8];
|
|
struct completion done;
|
|
};
|
|
|
|
/**
|
|
* struct mchp_spdifrx_user_data: MCHP SPDIFRX user data
|
|
* @data: user data bits
|
|
* @done: completion to signal user data bits acquisition done
|
|
*/
|
|
struct mchp_spdifrx_user_data {
|
|
unsigned char data[SPDIFRX_UD_BITS / 8];
|
|
struct completion done;
|
|
};
|
|
|
|
/**
|
|
* struct mchp_spdifrx_mixer_control: MCHP SPDIFRX mixer control data structure
|
|
* @ch_stat: array of channel statuses
|
|
* @user_data: array of user data
|
|
* @ulock: ulock bit status
|
|
* @badf: badf bit status
|
|
* @signal: signal bit status
|
|
*/
|
|
struct mchp_spdifrx_mixer_control {
|
|
struct mchp_spdifrx_ch_stat ch_stat[SPDIFRX_CHANNELS];
|
|
struct mchp_spdifrx_user_data user_data[SPDIFRX_CHANNELS];
|
|
bool ulock;
|
|
bool badf;
|
|
bool signal;
|
|
};
|
|
|
|
/**
|
|
* struct mchp_spdifrx_dev: MCHP SPDIFRX device data structure
|
|
* @capture: DAI DMA configuration data
|
|
* @control: mixer controls
|
|
* @mlock: mutex to protect concurency b/w configuration and control APIs
|
|
* @dev: struct device
|
|
* @regmap: regmap for this device
|
|
* @pclk: peripheral clock
|
|
* @gclk: generic clock
|
|
* @trigger_enabled: true if enabled though trigger() ops
|
|
*/
|
|
struct mchp_spdifrx_dev {
|
|
struct snd_dmaengine_dai_dma_data capture;
|
|
struct mchp_spdifrx_mixer_control control;
|
|
struct mutex mlock;
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct clk *pclk;
|
|
struct clk *gclk;
|
|
unsigned int trigger_enabled;
|
|
};
|
|
|
|
static void mchp_spdifrx_channel_status_read(struct mchp_spdifrx_dev *dev,
|
|
int channel)
|
|
{
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
u8 *ch_stat = &ctrl->ch_stat[channel].data[0];
|
|
u32 val;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ctrl->ch_stat[channel].data) / 4; i++) {
|
|
regmap_read(dev->regmap, SPDIFRX_CHSR(channel, i), &val);
|
|
*ch_stat++ = val & 0xFF;
|
|
*ch_stat++ = (val >> 8) & 0xFF;
|
|
*ch_stat++ = (val >> 16) & 0xFF;
|
|
*ch_stat++ = (val >> 24) & 0xFF;
|
|
}
|
|
}
|
|
|
|
static void mchp_spdifrx_channel_user_data_read(struct mchp_spdifrx_dev *dev,
|
|
int channel)
|
|
{
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
u8 *user_data = &ctrl->user_data[channel].data[0];
|
|
u32 val;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ctrl->user_data[channel].data) / 4; i++) {
|
|
regmap_read(dev->regmap, SPDIFRX_CHUD(channel, i), &val);
|
|
*user_data++ = val & 0xFF;
|
|
*user_data++ = (val >> 8) & 0xFF;
|
|
*user_data++ = (val >> 16) & 0xFF;
|
|
*user_data++ = (val >> 24) & 0xFF;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t mchp_spdif_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mchp_spdifrx_dev *dev = dev_id;
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
u32 sr, imr, pending;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
int ch;
|
|
|
|
regmap_read(dev->regmap, SPDIFRX_ISR, &sr);
|
|
regmap_read(dev->regmap, SPDIFRX_IMR, &imr);
|
|
pending = sr & imr;
|
|
dev_dbg(dev->dev, "ISR: %#x, IMR: %#x, pending: %#x\n", sr, imr,
|
|
pending);
|
|
|
|
if (!pending)
|
|
return IRQ_NONE;
|
|
|
|
if (pending & SPDIFRX_IR_BLOCKEND) {
|
|
for (ch = 0; ch < SPDIFRX_CHANNELS; ch++) {
|
|
mchp_spdifrx_channel_user_data_read(dev, ch);
|
|
complete(&ctrl->user_data[ch].done);
|
|
}
|
|
regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_BLOCKEND);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
for (ch = 0; ch < SPDIFRX_CHANNELS; ch++) {
|
|
if (pending & SPDIFRX_IR_CSC(ch)) {
|
|
mchp_spdifrx_channel_status_read(dev, ch);
|
|
complete(&ctrl->ch_stat[ch].done);
|
|
regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_CSC(ch));
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
if (pending & SPDIFRX_IR_OVERRUN) {
|
|
dev_warn(dev->dev, "Overrun detected\n");
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mchp_spdifrx_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
int ret = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
mutex_lock(&dev->mlock);
|
|
/* Enable overrun interrupts */
|
|
regmap_write(dev->regmap, SPDIFRX_IER, SPDIFRX_IR_OVERRUN);
|
|
|
|
/* Enable receiver. */
|
|
regmap_update_bits(dev->regmap, SPDIFRX_MR, SPDIFRX_MR_RXEN_MASK,
|
|
SPDIFRX_MR_RXEN_ENABLE);
|
|
dev->trigger_enabled = true;
|
|
mutex_unlock(&dev->mlock);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
mutex_lock(&dev->mlock);
|
|
/* Disable overrun interrupts */
|
|
regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_OVERRUN);
|
|
|
|
/* Disable receiver. */
|
|
regmap_update_bits(dev->regmap, SPDIFRX_MR, SPDIFRX_MR_RXEN_MASK,
|
|
SPDIFRX_MR_RXEN_DISABLE);
|
|
dev->trigger_enabled = false;
|
|
mutex_unlock(&dev->mlock);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int mchp_spdifrx_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
u32 mr = 0;
|
|
int ret;
|
|
|
|
dev_dbg(dev->dev, "%s() rate=%u format=%#x width=%u channels=%u\n",
|
|
__func__, params_rate(params), params_format(params),
|
|
params_width(params), params_channels(params));
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
dev_err(dev->dev, "Playback is not supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (params_channels(params) != SPDIFRX_CHANNELS) {
|
|
dev_err(dev->dev, "unsupported number of channels: %d\n",
|
|
params_channels(params));
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_BE:
|
|
case SNDRV_PCM_FORMAT_S20_3BE:
|
|
case SNDRV_PCM_FORMAT_S24_3BE:
|
|
case SNDRV_PCM_FORMAT_S24_BE:
|
|
mr |= SPDIFRX_MR_ENDIAN_BIG;
|
|
fallthrough;
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
case SNDRV_PCM_FORMAT_S24_3LE:
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
mr |= SPDIFRX_MR_DATAWIDTH(params_width(params));
|
|
break;
|
|
default:
|
|
dev_err(dev->dev, "unsupported PCM format: %d\n",
|
|
params_format(params));
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&dev->mlock);
|
|
if (dev->trigger_enabled) {
|
|
dev_err(dev->dev, "PCM already running\n");
|
|
ret = -EBUSY;
|
|
goto unlock;
|
|
}
|
|
|
|
/* GCLK is enabled by runtime PM. */
|
|
clk_disable_unprepare(dev->gclk);
|
|
|
|
ret = clk_set_min_rate(dev->gclk, params_rate(params) *
|
|
SPDIFRX_GCLK_RATIO_MIN + 1);
|
|
if (ret) {
|
|
dev_err(dev->dev,
|
|
"unable to set gclk min rate: rate %u * ratio %u + 1\n",
|
|
params_rate(params), SPDIFRX_GCLK_RATIO_MIN);
|
|
/* Restore runtime PM state. */
|
|
clk_prepare_enable(dev->gclk);
|
|
goto unlock;
|
|
}
|
|
ret = clk_prepare_enable(dev->gclk);
|
|
if (ret) {
|
|
dev_err(dev->dev, "unable to enable gclk: %d\n", ret);
|
|
goto unlock;
|
|
}
|
|
|
|
dev_dbg(dev->dev, "GCLK range min set to %d\n",
|
|
params_rate(params) * SPDIFRX_GCLK_RATIO_MIN + 1);
|
|
|
|
ret = regmap_write(dev->regmap, SPDIFRX_MR, mr);
|
|
|
|
unlock:
|
|
mutex_unlock(&dev->mlock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops mchp_spdifrx_dai_ops = {
|
|
.trigger = mchp_spdifrx_trigger,
|
|
.hw_params = mchp_spdifrx_hw_params,
|
|
};
|
|
|
|
#define MCHP_SPDIF_RATES SNDRV_PCM_RATE_8000_192000
|
|
|
|
#define MCHP_SPDIF_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
|
|
SNDRV_PCM_FMTBIT_U16_BE | \
|
|
SNDRV_PCM_FMTBIT_S20_3LE | \
|
|
SNDRV_PCM_FMTBIT_S20_3BE | \
|
|
SNDRV_PCM_FMTBIT_S24_3LE | \
|
|
SNDRV_PCM_FMTBIT_S24_3BE | \
|
|
SNDRV_PCM_FMTBIT_S24_LE | \
|
|
SNDRV_PCM_FMTBIT_S24_BE \
|
|
)
|
|
|
|
static int mchp_spdifrx_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_IEC958;
|
|
uinfo->count = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_spdifrx_cs_get(struct mchp_spdifrx_dev *dev,
|
|
int channel,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
struct mchp_spdifrx_ch_stat *ch_stat = &ctrl->ch_stat[channel];
|
|
int ret = 0;
|
|
|
|
mutex_lock(&dev->mlock);
|
|
|
|
ret = pm_runtime_resume_and_get(dev->dev);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
/*
|
|
* We may reach this point with both clocks enabled but the receiver
|
|
* still disabled. To void waiting for completion and return with
|
|
* timeout check the dev->trigger_enabled.
|
|
*
|
|
* To retrieve data:
|
|
* - if the receiver is enabled CSC IRQ will update the data in software
|
|
* caches (ch_stat->data)
|
|
* - otherwise we just update it here the software caches with latest
|
|
* available information and return it; in this case we don't need
|
|
* spin locking as the IRQ is disabled and will not be raised from
|
|
* anywhere else.
|
|
*/
|
|
|
|
if (dev->trigger_enabled) {
|
|
reinit_completion(&ch_stat->done);
|
|
regmap_write(dev->regmap, SPDIFRX_IER, SPDIFRX_IR_CSC(channel));
|
|
/* Check for new data available */
|
|
ret = wait_for_completion_interruptible_timeout(&ch_stat->done,
|
|
msecs_to_jiffies(100));
|
|
/* Valid stream might not be present */
|
|
if (ret <= 0) {
|
|
dev_dbg(dev->dev, "channel status for channel %d timeout\n",
|
|
channel);
|
|
regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_CSC(channel));
|
|
ret = ret ? : -ETIMEDOUT;
|
|
goto pm_runtime_put;
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
} else {
|
|
/* Update software cache with latest channel status. */
|
|
mchp_spdifrx_channel_status_read(dev, channel);
|
|
}
|
|
|
|
memcpy(uvalue->value.iec958.status, ch_stat->data,
|
|
sizeof(ch_stat->data));
|
|
|
|
pm_runtime_put:
|
|
pm_runtime_mark_last_busy(dev->dev);
|
|
pm_runtime_put_autosuspend(dev->dev);
|
|
unlock:
|
|
mutex_unlock(&dev->mlock);
|
|
return ret;
|
|
}
|
|
|
|
static int mchp_spdifrx_cs1_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
|
|
return mchp_spdifrx_cs_get(dev, 0, uvalue);
|
|
}
|
|
|
|
static int mchp_spdifrx_cs2_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
|
|
return mchp_spdifrx_cs_get(dev, 1, uvalue);
|
|
}
|
|
|
|
static int mchp_spdifrx_cs_mask(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
memset(uvalue->value.iec958.status, 0xff,
|
|
sizeof(uvalue->value.iec958.status));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_spdifrx_subcode_ch_get(struct mchp_spdifrx_dev *dev,
|
|
int channel,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
struct mchp_spdifrx_user_data *user_data = &ctrl->user_data[channel];
|
|
int ret = 0;
|
|
|
|
mutex_lock(&dev->mlock);
|
|
|
|
ret = pm_runtime_resume_and_get(dev->dev);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
/*
|
|
* We may reach this point with both clocks enabled but the receiver
|
|
* still disabled. To void waiting for completion to just timeout we
|
|
* check here the dev->trigger_enabled flag.
|
|
*
|
|
* To retrieve data:
|
|
* - if the receiver is enabled we need to wait for blockend IRQ to read
|
|
* data to and update it for us in software caches
|
|
* - otherwise reading the SPDIFRX_CHUD() registers is enough.
|
|
*/
|
|
|
|
if (dev->trigger_enabled) {
|
|
reinit_completion(&user_data->done);
|
|
regmap_write(dev->regmap, SPDIFRX_IER, SPDIFRX_IR_BLOCKEND);
|
|
ret = wait_for_completion_interruptible_timeout(&user_data->done,
|
|
msecs_to_jiffies(100));
|
|
/* Valid stream might not be present. */
|
|
if (ret <= 0) {
|
|
dev_dbg(dev->dev, "user data for channel %d timeout\n",
|
|
channel);
|
|
regmap_write(dev->regmap, SPDIFRX_IDR, SPDIFRX_IR_BLOCKEND);
|
|
ret = ret ? : -ETIMEDOUT;
|
|
goto pm_runtime_put;
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
} else {
|
|
/* Update software cache with last available data. */
|
|
mchp_spdifrx_channel_user_data_read(dev, channel);
|
|
}
|
|
|
|
memcpy(uvalue->value.iec958.subcode, user_data->data,
|
|
sizeof(user_data->data));
|
|
|
|
pm_runtime_put:
|
|
pm_runtime_mark_last_busy(dev->dev);
|
|
pm_runtime_put_autosuspend(dev->dev);
|
|
unlock:
|
|
mutex_unlock(&dev->mlock);
|
|
return ret;
|
|
}
|
|
|
|
static int mchp_spdifrx_subcode_ch1_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
|
|
return mchp_spdifrx_subcode_ch_get(dev, 0, uvalue);
|
|
}
|
|
|
|
static int mchp_spdifrx_subcode_ch2_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
|
|
return mchp_spdifrx_subcode_ch_get(dev, 1, uvalue);
|
|
}
|
|
|
|
static int mchp_spdifrx_boolean_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_spdifrx_ulock_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
u32 val;
|
|
int ret;
|
|
bool ulock_old = ctrl->ulock;
|
|
|
|
mutex_lock(&dev->mlock);
|
|
|
|
ret = pm_runtime_resume_and_get(dev->dev);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
/*
|
|
* The RSR.ULOCK has wrong value if both pclk and gclk are enabled
|
|
* and the receiver is disabled. Thus we take into account the
|
|
* dev->trigger_enabled here to return a real status.
|
|
*/
|
|
if (dev->trigger_enabled) {
|
|
regmap_read(dev->regmap, SPDIFRX_RSR, &val);
|
|
ctrl->ulock = !(val & SPDIFRX_RSR_ULOCK);
|
|
} else {
|
|
ctrl->ulock = 0;
|
|
}
|
|
|
|
uvalue->value.integer.value[0] = ctrl->ulock;
|
|
|
|
pm_runtime_mark_last_busy(dev->dev);
|
|
pm_runtime_put_autosuspend(dev->dev);
|
|
unlock:
|
|
mutex_unlock(&dev->mlock);
|
|
|
|
return ulock_old != ctrl->ulock;
|
|
}
|
|
|
|
static int mchp_spdifrx_badf_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
u32 val;
|
|
int ret;
|
|
bool badf_old = ctrl->badf;
|
|
|
|
mutex_lock(&dev->mlock);
|
|
|
|
ret = pm_runtime_resume_and_get(dev->dev);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
/*
|
|
* The RSR.ULOCK has wrong value if both pclk and gclk are enabled
|
|
* and the receiver is disabled. Thus we take into account the
|
|
* dev->trigger_enabled here to return a real status.
|
|
*/
|
|
if (dev->trigger_enabled) {
|
|
regmap_read(dev->regmap, SPDIFRX_RSR, &val);
|
|
ctrl->badf = !!(val & SPDIFRX_RSR_BADF);
|
|
} else {
|
|
ctrl->badf = 0;
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(dev->dev);
|
|
pm_runtime_put_autosuspend(dev->dev);
|
|
unlock:
|
|
mutex_unlock(&dev->mlock);
|
|
|
|
uvalue->value.integer.value[0] = ctrl->badf;
|
|
|
|
return badf_old != ctrl->badf;
|
|
}
|
|
|
|
static int mchp_spdifrx_signal_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *uvalue)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
u32 val = ~0U, loops = 10;
|
|
int ret;
|
|
bool signal_old = ctrl->signal;
|
|
|
|
mutex_lock(&dev->mlock);
|
|
|
|
ret = pm_runtime_resume_and_get(dev->dev);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
/*
|
|
* To get the signal we need to have receiver enabled. This
|
|
* could be enabled also from trigger() function thus we need to
|
|
* take care of not disabling the receiver when it runs.
|
|
*/
|
|
if (!dev->trigger_enabled) {
|
|
regmap_update_bits(dev->regmap, SPDIFRX_MR, SPDIFRX_MR_RXEN_MASK,
|
|
SPDIFRX_MR_RXEN_ENABLE);
|
|
|
|
/* Wait for RSR.ULOCK bit. */
|
|
while (--loops) {
|
|
regmap_read(dev->regmap, SPDIFRX_RSR, &val);
|
|
if (!(val & SPDIFRX_RSR_ULOCK))
|
|
break;
|
|
usleep_range(100, 150);
|
|
}
|
|
|
|
regmap_update_bits(dev->regmap, SPDIFRX_MR, SPDIFRX_MR_RXEN_MASK,
|
|
SPDIFRX_MR_RXEN_DISABLE);
|
|
} else {
|
|
regmap_read(dev->regmap, SPDIFRX_RSR, &val);
|
|
}
|
|
|
|
pm_runtime_mark_last_busy(dev->dev);
|
|
pm_runtime_put_autosuspend(dev->dev);
|
|
|
|
unlock:
|
|
mutex_unlock(&dev->mlock);
|
|
|
|
if (!(val & SPDIFRX_RSR_ULOCK))
|
|
ctrl->signal = !(val & SPDIFRX_RSR_NOSIGNAL);
|
|
else
|
|
ctrl->signal = 0;
|
|
uvalue->value.integer.value[0] = ctrl->signal;
|
|
|
|
return signal_old != ctrl->signal;
|
|
}
|
|
|
|
static int mchp_spdifrx_rate_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 1;
|
|
uinfo->value.integer.min = 0;
|
|
uinfo->value.integer.max = 192000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_spdifrx_rate_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_dai *dai = snd_kcontrol_chip(kcontrol);
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
unsigned long rate;
|
|
u32 val;
|
|
int ret;
|
|
|
|
mutex_lock(&dev->mlock);
|
|
|
|
ret = pm_runtime_resume_and_get(dev->dev);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
/*
|
|
* The RSR.ULOCK has wrong value if both pclk and gclk are enabled
|
|
* and the receiver is disabled. Thus we take into account the
|
|
* dev->trigger_enabled here to return a real status.
|
|
*/
|
|
if (dev->trigger_enabled) {
|
|
regmap_read(dev->regmap, SPDIFRX_RSR, &val);
|
|
/* If the receiver is not locked, ISF data is invalid. */
|
|
if (val & SPDIFRX_RSR_ULOCK || !(val & SPDIFRX_RSR_IFS_MASK)) {
|
|
ucontrol->value.integer.value[0] = 0;
|
|
goto pm_runtime_put;
|
|
}
|
|
} else {
|
|
/* Reveicer is not locked, IFS data is invalid. */
|
|
ucontrol->value.integer.value[0] = 0;
|
|
goto pm_runtime_put;
|
|
}
|
|
|
|
rate = clk_get_rate(dev->gclk);
|
|
|
|
ucontrol->value.integer.value[0] = rate / (32 * SPDIFRX_RSR_IFS(val));
|
|
|
|
pm_runtime_put:
|
|
pm_runtime_mark_last_busy(dev->dev);
|
|
pm_runtime_put_autosuspend(dev->dev);
|
|
unlock:
|
|
mutex_unlock(&dev->mlock);
|
|
return ret;
|
|
}
|
|
|
|
static struct snd_kcontrol_new mchp_spdifrx_ctrls[] = {
|
|
/* Channel status controller */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT)
|
|
" Channel 1",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = mchp_spdifrx_info,
|
|
.get = mchp_spdifrx_cs1_get,
|
|
},
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, DEFAULT)
|
|
" Channel 2",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = mchp_spdifrx_info,
|
|
.get = mchp_spdifrx_cs2_get,
|
|
},
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, MASK),
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ,
|
|
.info = mchp_spdifrx_info,
|
|
.get = mchp_spdifrx_cs_mask,
|
|
},
|
|
/* User bits controller */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "IEC958 Subcode Capture Default Channel 1",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = mchp_spdifrx_info,
|
|
.get = mchp_spdifrx_subcode_ch1_get,
|
|
},
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "IEC958 Subcode Capture Default Channel 2",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = mchp_spdifrx_info,
|
|
.get = mchp_spdifrx_subcode_ch2_get,
|
|
},
|
|
/* Lock status */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) "Unlocked",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = mchp_spdifrx_boolean_info,
|
|
.get = mchp_spdifrx_ulock_get,
|
|
},
|
|
/* Bad format */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE)"Bad Format",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = mchp_spdifrx_boolean_info,
|
|
.get = mchp_spdifrx_badf_get,
|
|
},
|
|
/* Signal */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) "Signal",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = mchp_spdifrx_boolean_info,
|
|
.get = mchp_spdifrx_signal_get,
|
|
},
|
|
/* Sampling rate */
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = SNDRV_CTL_NAME_IEC958("", CAPTURE, NONE) "Rate",
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.info = mchp_spdifrx_rate_info,
|
|
.get = mchp_spdifrx_rate_get,
|
|
},
|
|
};
|
|
|
|
static int mchp_spdifrx_dai_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
struct mchp_spdifrx_mixer_control *ctrl = &dev->control;
|
|
int ch;
|
|
|
|
snd_soc_dai_init_dma_data(dai, NULL, &dev->capture);
|
|
|
|
/* Software reset the IP */
|
|
regmap_write(dev->regmap, SPDIFRX_CR, SPDIFRX_CR_SWRST);
|
|
|
|
/* Default configuration */
|
|
regmap_write(dev->regmap, SPDIFRX_MR,
|
|
SPDIFRX_MR_VBMODE_DISCARD_IF_VB1 |
|
|
SPDIFRX_MR_SBMODE_DISCARD |
|
|
SPDIFRX_MR_AUTORST_NOACTION |
|
|
SPDIFRX_MR_PACK_DISABLED);
|
|
|
|
for (ch = 0; ch < SPDIFRX_CHANNELS; ch++) {
|
|
init_completion(&ctrl->ch_stat[ch].done);
|
|
init_completion(&ctrl->user_data[ch].done);
|
|
}
|
|
|
|
/* Add controls */
|
|
snd_soc_add_dai_controls(dai, mchp_spdifrx_ctrls,
|
|
ARRAY_SIZE(mchp_spdifrx_ctrls));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_spdifrx_dai_remove(struct snd_soc_dai *dai)
|
|
{
|
|
struct mchp_spdifrx_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
|
|
/* Disable interrupts */
|
|
regmap_write(dev->regmap, SPDIFRX_IDR, GENMASK(14, 0));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_dai_driver mchp_spdifrx_dai = {
|
|
.name = "mchp-spdifrx",
|
|
.probe = mchp_spdifrx_dai_probe,
|
|
.remove = mchp_spdifrx_dai_remove,
|
|
.capture = {
|
|
.stream_name = "S/PDIF Capture",
|
|
.channels_min = SPDIFRX_CHANNELS,
|
|
.channels_max = SPDIFRX_CHANNELS,
|
|
.rates = MCHP_SPDIF_RATES,
|
|
.formats = MCHP_SPDIF_FORMATS,
|
|
},
|
|
.ops = &mchp_spdifrx_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver mchp_spdifrx_component = {
|
|
.name = "mchp-spdifrx",
|
|
.legacy_dai_naming = 1,
|
|
};
|
|
|
|
static const struct of_device_id mchp_spdifrx_dt_ids[] = {
|
|
{
|
|
.compatible = "microchip,sama7g5-spdifrx",
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mchp_spdifrx_dt_ids);
|
|
|
|
static int mchp_spdifrx_runtime_suspend(struct device *dev)
|
|
{
|
|
struct mchp_spdifrx_dev *spdifrx = dev_get_drvdata(dev);
|
|
|
|
regcache_cache_only(spdifrx->regmap, true);
|
|
clk_disable_unprepare(spdifrx->gclk);
|
|
clk_disable_unprepare(spdifrx->pclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mchp_spdifrx_runtime_resume(struct device *dev)
|
|
{
|
|
struct mchp_spdifrx_dev *spdifrx = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(spdifrx->pclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(spdifrx->gclk);
|
|
if (ret)
|
|
goto disable_pclk;
|
|
|
|
regcache_cache_only(spdifrx->regmap, false);
|
|
regcache_mark_dirty(spdifrx->regmap);
|
|
ret = regcache_sync(spdifrx->regmap);
|
|
if (ret) {
|
|
regcache_cache_only(spdifrx->regmap, true);
|
|
clk_disable_unprepare(spdifrx->gclk);
|
|
disable_pclk:
|
|
clk_disable_unprepare(spdifrx->pclk);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops mchp_spdifrx_pm_ops = {
|
|
RUNTIME_PM_OPS(mchp_spdifrx_runtime_suspend, mchp_spdifrx_runtime_resume,
|
|
NULL)
|
|
};
|
|
|
|
static int mchp_spdifrx_probe(struct platform_device *pdev)
|
|
{
|
|
struct mchp_spdifrx_dev *dev;
|
|
struct resource *mem;
|
|
struct regmap *regmap;
|
|
void __iomem *base;
|
|
int irq;
|
|
int err;
|
|
u32 vers;
|
|
|
|
/* Get memory for driver data. */
|
|
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
/* Map I/O registers. */
|
|
base = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
regmap = devm_regmap_init_mmio(&pdev->dev, base,
|
|
&mchp_spdifrx_regmap_config);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
/* Request IRQ. */
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
err = devm_request_irq(&pdev->dev, irq, mchp_spdif_interrupt, 0,
|
|
dev_name(&pdev->dev), dev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Get the peripheral clock */
|
|
dev->pclk = devm_clk_get(&pdev->dev, "pclk");
|
|
if (IS_ERR(dev->pclk)) {
|
|
err = PTR_ERR(dev->pclk);
|
|
dev_err(&pdev->dev, "failed to get the peripheral clock: %d\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
/* Get the generated clock */
|
|
dev->gclk = devm_clk_get(&pdev->dev, "gclk");
|
|
if (IS_ERR(dev->gclk)) {
|
|
err = PTR_ERR(dev->gclk);
|
|
dev_err(&pdev->dev,
|
|
"failed to get the PMC generated clock: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Signal control need a valid rate on gclk. hw_params() configures
|
|
* it propertly but requesting signal before any hw_params() has been
|
|
* called lead to invalid value returned for signal. Thus, configure
|
|
* gclk at a valid rate, here, in initialization, to simplify the
|
|
* control path.
|
|
*/
|
|
clk_set_min_rate(dev->gclk, 48000 * SPDIFRX_GCLK_RATIO_MIN + 1);
|
|
|
|
mutex_init(&dev->mlock);
|
|
|
|
dev->dev = &pdev->dev;
|
|
dev->regmap = regmap;
|
|
platform_set_drvdata(pdev, dev);
|
|
|
|
pm_runtime_enable(dev->dev);
|
|
if (!pm_runtime_enabled(dev->dev)) {
|
|
err = mchp_spdifrx_runtime_resume(dev->dev);
|
|
if (err)
|
|
goto pm_runtime_disable;
|
|
}
|
|
|
|
dev->capture.addr = (dma_addr_t)mem->start + SPDIFRX_RHR;
|
|
dev->capture.maxburst = 1;
|
|
|
|
err = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to register PCM: %d\n", err);
|
|
goto pm_runtime_suspend;
|
|
}
|
|
|
|
err = devm_snd_soc_register_component(&pdev->dev,
|
|
&mchp_spdifrx_component,
|
|
&mchp_spdifrx_dai, 1);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "fail to register dai\n");
|
|
goto pm_runtime_suspend;
|
|
}
|
|
|
|
regmap_read(regmap, SPDIFRX_VERSION, &vers);
|
|
dev_info(&pdev->dev, "hw version: %#lx\n", vers & SPDIFRX_VERSION_MASK);
|
|
|
|
return 0;
|
|
|
|
pm_runtime_suspend:
|
|
if (!pm_runtime_status_suspended(dev->dev))
|
|
mchp_spdifrx_runtime_suspend(dev->dev);
|
|
pm_runtime_disable:
|
|
pm_runtime_disable(dev->dev);
|
|
return err;
|
|
}
|
|
|
|
static int mchp_spdifrx_remove(struct platform_device *pdev)
|
|
{
|
|
struct mchp_spdifrx_dev *dev = platform_get_drvdata(pdev);
|
|
|
|
pm_runtime_disable(dev->dev);
|
|
if (!pm_runtime_status_suspended(dev->dev))
|
|
mchp_spdifrx_runtime_suspend(dev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver mchp_spdifrx_driver = {
|
|
.probe = mchp_spdifrx_probe,
|
|
.remove = mchp_spdifrx_remove,
|
|
.driver = {
|
|
.name = "mchp_spdifrx",
|
|
.of_match_table = of_match_ptr(mchp_spdifrx_dt_ids),
|
|
.pm = pm_ptr(&mchp_spdifrx_pm_ops),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mchp_spdifrx_driver);
|
|
|
|
MODULE_AUTHOR("Codrin Ciubotariu <codrin.ciubotariu@microchip.com>");
|
|
MODULE_DESCRIPTION("Microchip S/PDIF RX Controller Driver");
|
|
MODULE_LICENSE("GPL v2");
|