kvj
/
linux-zen-desktop
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
linux-zen-desktop/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml

813 lines
20 KiB
YAML
Raw Normal View History

Initial commit
2023-08-30 17:31:07 +02:00
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT7530 and MT7531 Ethernet Switches
maintainers:
- Arınç ÜNAL <arinc.unal@arinc9.com>
- Landen Chao <Landen.Chao@mediatek.com>
- DENG Qingfang <dqfext@gmail.com>
- Sean Wang <sean.wang@mediatek.com>
6.5.5
2023-10-24 12:59:35 +02:00
- Daniel Golle <daniel@makrotopia.org>
Initial commit
2023-08-30 17:31:07 +02:00
description: |
6.5.5
2023-10-24 12:59:35 +02:00
There are three versions of MT7530, standalone, in a multi-chip module and
built-into a SoC.
Initial commit
2023-08-30 17:31:07 +02:00
MT7530 is a part of the multi-chip module in MT7620AN, MT7620DA, MT7620DAN,
MT7620NN, MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs.
6.5.5
2023-10-24 12:59:35 +02:00
The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
memory map rather than using MDIO. The switch got an internally connected 10G
CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.
Initial commit
2023-08-30 17:31:07 +02:00
MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
and the switch registers are directly mapped into SoC's memory map rather than
6.5.5
2023-10-24 12:59:35 +02:00
using MDIO. The DSA driver currently doesn't support MT7620 variants.
Initial commit
2023-08-30 17:31:07 +02:00
There is only the standalone version of MT7531.
Port 5 on MT7530 has got various ways of configuration:
- Port 5 can be used as a CPU port.
- PHY 0 or 4 of the switch can be muxed to gmac5 of the switch. Therefore,
the gmac of the SoC which is wired to port 5 can connect to the PHY.
This is usually used for connecting the wan port directly to the CPU to
achieve 2 Gbps routing in total.
The driver looks up the reg on the ethernet-phy node, which the phy-handle
property on the gmac node refers to, to mux the specified phy.
The driver requires the gmac of the SoC to have "mediatek,eth-mac" as the
compatible string and the reg must be 1. So, for now, only gmac1 of a
MediaTek SoC can benefit this. Banana Pi BPI-R2 suits this.
For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
Check out example 5.
- For the multi-chip module MT7530, in case of an external phy wired to
gmac1 of the SoC, port 5 must not be enabled.
In case of muxing PHY 0 or 4, the external phy must not be enabled.
For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function.
Check out example 6.
- Port 5 can be wired to an external phy. Port 5 becomes a DSA slave.
For the multi-chip module MT7530, the external phy must be wired TX to TX
to gmac1 of the SoC for this to work. Ubiquiti EdgeRouter X SFP is wired
this way.
For the multi-chip module MT7530, muxing PHY 0 or 4 won't work when the
external phy is connected TX to TX.
For the MT7621 SoCs, rgmii2 group must be claimed with gpio function.
Check out example 7.
properties:
compatible:
oneOf:
- description:
Standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC
const: mediatek,mt7530
- description:
Standalone MT7531
const: mediatek,mt7531
- description:
Multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
const: mediatek,mt7621
6.5.5
2023-10-24 12:59:35 +02:00
- description:
Built-in switch of the MT7988 SoC
const: mediatek,mt7988-switch
Initial commit
2023-08-30 17:31:07 +02:00
reg:
maxItems: 1
core-supply:
description:
Phandle to the regulator node necessary for the core power.
"#gpio-cells":
const: 2
gpio-controller:
type: boolean
6.5.5
2023-10-24 12:59:35 +02:00
description: |
Initial commit
2023-08-30 17:31:07 +02:00
If defined, LED controller of the MT7530 switch will run on GPIO mode.
There are 15 controllable pins.
port 0 LED 0..2 as GPIO 0..2
port 1 LED 0..2 as GPIO 3..5
port 2 LED 0..2 as GPIO 6..8
port 3 LED 0..2 as GPIO 9..11
port 4 LED 0..2 as GPIO 12..14
"#interrupt-cells":
const: 1
interrupt-controller: true
interrupts:
maxItems: 1
io-supply:
6.5.5
2023-10-24 12:59:35 +02:00
description: |
Initial commit
2023-08-30 17:31:07 +02:00
Phandle to the regulator node necessary for the I/O power.
See Documentation/devicetree/bindings/regulator/mt6323-regulator.txt for
details for the regulator setup on these boards.
mediatek,mcm:
type: boolean
description:
Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530
switch is a part of the multi-chip module.
reset-gpios:
6.5.5
2023-10-24 12:59:35 +02:00
description: |
Initial commit
2023-08-30 17:31:07 +02:00
GPIO to reset the switch. Use this if mediatek,mcm is not used.
This property is optional because some boards share the reset line with
other components which makes it impossible to probe the switch if the
reset line is used.
maxItems: 1
reset-names:
const: mcm
resets:
description:
Phandle pointing to the system reset controller with line index for the
ethsys.
maxItems: 1
patternProperties:
"^(ethernet-)?ports$":
type: object
patternProperties:
"^(ethernet-)?port@[0-9]+$":
type: object
properties:
reg:
description:
Port address described must be 5 or 6 for CPU port and from 0 to 5
for user ports.
allOf:
- if:
required: [ ethernet ]
then:
properties:
reg:
enum:
- 5
- 6
required:
- compatible
- reg
$defs:
mt7530-dsa-port:
patternProperties:
"^(ethernet-)?ports$":
patternProperties:
"^(ethernet-)?port@[0-9]+$":
if:
required: [ ethernet ]
then:
if:
properties:
reg:
const: 5
then:
properties:
phy-mode:
enum:
- gmii
- mii
- rgmii
else:
properties:
phy-mode:
enum:
- rgmii
- trgmii
mt7531-dsa-port:
patternProperties:
"^(ethernet-)?ports$":
patternProperties:
"^(ethernet-)?port@[0-9]+$":
if:
required: [ ethernet ]
then:
if:
properties:
reg:
const: 5
then:
properties:
phy-mode:
enum:
- 1000base-x
- 2500base-x
- rgmii
- sgmii
else:
properties:
phy-mode:
enum:
- 1000base-x
- 2500base-x
- sgmii
allOf:
- $ref: dsa.yaml#/$defs/ethernet-ports
- if:
required:
- mediatek,mcm
then:
properties:
reset-gpios: false
required:
- resets
- reset-names
- dependencies:
interrupt-controller: [ interrupts ]
- if:
properties:
compatible:
const: mediatek,mt7530
then:
$ref: "#/$defs/mt7530-dsa-port"
required:
- core-supply
- io-supply
- if:
properties:
compatible:
const: mediatek,mt7531
then:
$ref: "#/$defs/mt7531-dsa-port"
properties:
gpio-controller: false
mediatek,mcm: false
- if:
properties:
compatible:
const: mediatek,mt7621
then:
$ref: "#/$defs/mt7530-dsa-port"
required:
- mediatek,mcm
6.5.5
2023-10-24 12:59:35 +02:00
- if:
properties:
compatible:
const: mediatek,mt7988-switch
then:
$ref: "#/$defs/mt7530-dsa-port"
properties:
gpio-controller: false
mediatek,mcm: false
reset-names: false
Initial commit
2023-08-30 17:31:07 +02:00
unevaluatedProperties: false
examples:
# Example 1: Standalone MT7530
- |
#include <dt-bindings/gpio/gpio.h>
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch@1f {
compatible = "mediatek,mt7530";
reg = <0x1f>;
reset-gpios = <&pio 33 0>;
core-supply = <&mt6323_vpa_reg>;
io-supply = <&mt6323_vemc3v3_reg>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "wan";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};
};
# Example 2: MT7530 in MT7623AI SoC
- |
#include <dt-bindings/reset/mt2701-resets.h>
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch@1f {
compatible = "mediatek,mt7530";
reg = <0x1f>;
mediatek,mcm;
resets = <&ethsys MT2701_ETHSYS_MCM_RST>;
reset-names = "mcm";
core-supply = <&mt6323_vpa_reg>;
io-supply = <&mt6323_vemc3v3_reg>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "wan";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};
};
# Example 3: Standalone MT7531
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch@0 {
compatible = "mediatek,mt7531";
reg = <0>;
reset-gpios = <&pio 54 0>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "wan";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "2500base-x";
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
};
};
};
# Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs
- |
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/reset/mt7621-reset.h>
mdio {
#address-cells = <1>;
#size-cells = <0>;
switch@1f {
compatible = "mediatek,mt7621";
reg = <0x1f>;
mediatek,mcm;
resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "wan";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};
};
# Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1
- |
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/reset/mt7621-reset.h>
ethernet {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii2_pins>;
mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&example5_ethphy4>;
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* MT7530's phy4 */
example5_ethphy4: ethernet-phy@4 {
reg = <4>;
};
switch@1f {
compatible = "mediatek,mt7621";
reg = <0x1f>;
mediatek,mcm;
resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
/* Commented out, phy4 is connected to gmac1.
port@4 {
reg = <4>;
label = "wan";
};
*/
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};
};
};
# Example 6: MT7621: mux external phy to SoC's gmac1
- |
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/reset/mt7621-reset.h>
ethernet {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii2_pins>;
mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-mode = "rgmii";
phy-handle = <&example6_ethphy7>;
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* External PHY */
example6_ethphy7: ethernet-phy@7 {
reg = <7>;
phy-mode = "rgmii";
};
switch@1f {
compatible = "mediatek,mt7621";
reg = <0x1f>;
mediatek,mcm;
resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "wan";
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};
};
};
# Example 7: MT7621: mux external phy to MT7530's port 5
- |
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/reset/mt7621-reset.h>
ethernet {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&rgmii2_pins>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
/* External PHY */
example7_ethphy7: ethernet-phy@7 {
reg = <7>;
phy-mode = "rgmii";
};
switch@1f {
compatible = "mediatek,mt7621";
reg = <0x1f>;
mediatek,mcm;
resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&gic>;
interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>;
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "lan1";
};
port@1 {
reg = <1>;
label = "lan2";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan4";
};
port@4 {
reg = <4>;
label = "wan";
};
port@5 {
reg = <5>;
label = "extphy";
phy-mode = "rgmii-txid";
phy-handle = <&example7_ethphy7>;
};
port@6 {
reg = <6>;
ethernet = <&gmac0>;
phy-mode = "trgmii";
fixed-link {
speed = <1000>;
full-duplex;
pause;
};
};
};
};
};
};