linux-zen-desktop/drivers/net/wireless/realtek/rtw88/sdio.h

179 lines
5.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/* Copyright (C) 2021 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* Copyright (C) 2021 Jernej Skrabec <jernej.skrabec@gmail.com>
*/
#ifndef __REG_SDIO_H_
#define __REG_SDIO_H_
/* I/O bus domain address mapping */
#define SDIO_LOCAL_OFFSET 0x10250000
#define WLAN_IOREG_OFFSET 0x10260000
#define FIRMWARE_FIFO_OFFSET 0x10270000
#define TX_HIQ_OFFSET 0x10310000
#define TX_MIQ_OFFSET 0x10320000
#define TX_LOQ_OFFSET 0x10330000
#define TX_EPQ_OFFSET 0x10350000
#define RX_RX0FF_OFFSET 0x10340000
#define RTW_SDIO_BUS_MSK 0xffff0000
#define SDIO_LOCAL_REG_MSK 0x00000fff
#define WLAN_IOREG_REG_MSK 0x0000ffff
/* SDIO Tx Control */
#define REG_SDIO_TX_CTRL (SDIO_LOCAL_OFFSET + 0x0000)
/*SDIO status timeout*/
#define REG_SDIO_TIMEOUT (SDIO_LOCAL_OFFSET + 0x0002)
/* SDIO Host Interrupt Mask */
#define REG_SDIO_HIMR (SDIO_LOCAL_OFFSET + 0x0014)
#define REG_SDIO_HIMR_RX_REQUEST BIT(0)
#define REG_SDIO_HIMR_AVAL BIT(1)
#define REG_SDIO_HIMR_TXERR BIT(2)
#define REG_SDIO_HIMR_RXERR BIT(3)
#define REG_SDIO_HIMR_TXFOVW BIT(4)
#define REG_SDIO_HIMR_RXFOVW BIT(5)
#define REG_SDIO_HIMR_TXBCNOK BIT(6)
#define REG_SDIO_HIMR_TXBCNERR BIT(7)
#define REG_SDIO_HIMR_BCNERLY_INT BIT(16)
#define REG_SDIO_HIMR_C2HCMD BIT(17)
#define REG_SDIO_HIMR_CPWM1 BIT(18)
#define REG_SDIO_HIMR_CPWM2 BIT(19)
#define REG_SDIO_HIMR_HSISR_IND BIT(20)
#define REG_SDIO_HIMR_GTINT3_IND BIT(21)
#define REG_SDIO_HIMR_GTINT4_IND BIT(22)
#define REG_SDIO_HIMR_PSTIMEOUT BIT(23)
#define REG_SDIO_HIMR_OCPINT BIT(24)
#define REG_SDIO_HIMR_ATIMEND BIT(25)
#define REG_SDIO_HIMR_ATIMEND_E BIT(26)
#define REG_SDIO_HIMR_CTWEND BIT(27)
/* the following two are RTL8188 SDIO Specific */
#define REG_SDIO_HIMR_MCU_ERR BIT(28)
#define REG_SDIO_HIMR_TSF_BIT32_TOGGLE BIT(29)
/* SDIO Host Interrupt Service Routine */
#define REG_SDIO_HISR (SDIO_LOCAL_OFFSET + 0x0018)
#define REG_SDIO_HISR_RX_REQUEST BIT(0)
#define REG_SDIO_HISR_AVAL BIT(1)
#define REG_SDIO_HISR_TXERR BIT(2)
#define REG_SDIO_HISR_RXERR BIT(3)
#define REG_SDIO_HISR_TXFOVW BIT(4)
#define REG_SDIO_HISR_RXFOVW BIT(5)
#define REG_SDIO_HISR_TXBCNOK BIT(6)
#define REG_SDIO_HISR_TXBCNERR BIT(7)
#define REG_SDIO_HISR_BCNERLY_INT BIT(16)
#define REG_SDIO_HISR_C2HCMD BIT(17)
#define REG_SDIO_HISR_CPWM1 BIT(18)
#define REG_SDIO_HISR_CPWM2 BIT(19)
#define REG_SDIO_HISR_HSISR_IND BIT(20)
#define REG_SDIO_HISR_GTINT3_IND BIT(21)
#define REG_SDIO_HISR_GTINT4_IND BIT(22)
#define REG_SDIO_HISR_PSTIMEOUT BIT(23)
#define REG_SDIO_HISR_OCPINT BIT(24)
#define REG_SDIO_HISR_ATIMEND BIT(25)
#define REG_SDIO_HISR_ATIMEND_E BIT(26)
#define REG_SDIO_HISR_CTWEND BIT(27)
/* the following two are RTL8188 SDIO Specific */
#define REG_SDIO_HISR_MCU_ERR BIT(28)
#define REG_SDIO_HISR_TSF_BIT32_TOGGLE BIT(29)
/* HCI Current Power Mode */
#define REG_SDIO_HCPWM (SDIO_LOCAL_OFFSET + 0x0019)
/* RXDMA Request Length */
#define REG_SDIO_RX0_REQ_LEN (SDIO_LOCAL_OFFSET + 0x001C)
/* OQT Free Page */
#define REG_SDIO_OQT_FREE_PG (SDIO_LOCAL_OFFSET + 0x001E)
/* Free Tx Buffer Page */
#define REG_SDIO_FREE_TXPG (SDIO_LOCAL_OFFSET + 0x0020)
/* HCI Current Power Mode 1 */
#define REG_SDIO_HCPWM1 (SDIO_LOCAL_OFFSET + 0x0024)
/* HCI Current Power Mode 2 */
#define REG_SDIO_HCPWM2 (SDIO_LOCAL_OFFSET + 0x0026)
/* Free Tx Page Sequence */
#define REG_SDIO_FREE_TXPG_SEQ (SDIO_LOCAL_OFFSET + 0x0028)
/* HTSF Information */
#define REG_SDIO_HTSFR_INFO (SDIO_LOCAL_OFFSET + 0x0030)
#define REG_SDIO_HCPWM1_V2 (SDIO_LOCAL_OFFSET + 0x0038)
/* H2C */
#define REG_SDIO_H2C (SDIO_LOCAL_OFFSET + 0x0060)
/* HCI Request Power Mode 1 */
#define REG_SDIO_HRPWM1 (SDIO_LOCAL_OFFSET + 0x0080)
/* HCI Request Power Mode 2 */
#define REG_SDIO_HRPWM2 (SDIO_LOCAL_OFFSET + 0x0082)
/* HCI Power Save Clock */
#define REG_SDIO_HPS_CLKR (SDIO_LOCAL_OFFSET + 0x0084)
/* SDIO HCI Suspend Control */
#define REG_SDIO_HSUS_CTRL (SDIO_LOCAL_OFFSET + 0x0086)
#define BIT_HCI_SUS_REQ BIT(0)
#define BIT_HCI_RESUME_RDY BIT(1)
/* SDIO Host Extension Interrupt Mask Always */
#define REG_SDIO_HIMR_ON (SDIO_LOCAL_OFFSET + 0x0090)
/* SDIO Host Extension Interrupt Status Always */
#define REG_SDIO_HISR_ON (SDIO_LOCAL_OFFSET + 0x0091)
#define REG_SDIO_INDIRECT_REG_CFG (SDIO_LOCAL_OFFSET + 0x0040)
#define BIT_SDIO_INDIRECT_REG_CFG_WORD BIT(16)
#define BIT_SDIO_INDIRECT_REG_CFG_DWORD BIT(17)
#define BIT_SDIO_INDIRECT_REG_CFG_WRITE BIT(18)
#define BIT_SDIO_INDIRECT_REG_CFG_READ BIT(19)
#define BIT_SDIO_INDIRECT_REG_CFG_UNK20 BIT(20)
#define REG_SDIO_INDIRECT_REG_DATA (SDIO_LOCAL_OFFSET + 0x0044)
/* Sdio Address for SDIO Local Reg, TRX FIFO, MAC Reg */
#define REG_SDIO_CMD_ADDR_MSK GENMASK(16, 13)
#define REG_SDIO_CMD_ADDR_SDIO_REG 0
#define REG_SDIO_CMD_ADDR_MAC_REG 8
#define REG_SDIO_CMD_ADDR_TXFF_HIGH 4
#define REG_SDIO_CMD_ADDR_TXFF_LOW 6
#define REG_SDIO_CMD_ADDR_TXFF_NORMAL 5
#define REG_SDIO_CMD_ADDR_TXFF_EXTRA 7
#define REG_SDIO_CMD_ADDR_RXFF 7
#define RTW_SDIO_BLOCK_SIZE 512
#define RTW_SDIO_ADDR_RX_RX0FF_GEN(_id) (0x0e000 | ((_id) & 0x3))
#define RTW_SDIO_DATA_PTR_ALIGN 8
struct sdio_func;
struct sdio_device_id;
struct rtw_sdio_tx_data {
u8 sn;
};
struct rtw_sdio_work_data {
struct work_struct work;
struct rtw_dev *rtwdev;
};
struct rtw_sdio {
struct sdio_func *sdio_func;
u32 irq_mask;
u8 rx_addr;
bool sdio3_bus_mode;
void *irq_thread;
struct workqueue_struct *txwq;
struct rtw_sdio_work_data *tx_handler_data;
struct sk_buff_head tx_queue[RTK_MAX_TX_QUEUE_NUM];
};
extern const struct dev_pm_ops rtw_sdio_pm_ops;
int rtw_sdio_probe(struct sdio_func *sdio_func,
const struct sdio_device_id *id);
void rtw_sdio_remove(struct sdio_func *sdio_func);
void rtw_sdio_shutdown(struct device *dev);
static inline bool rtw_sdio_is_sdio30_supported(struct rtw_dev *rtwdev)
{
struct rtw_sdio *rtwsdio = (struct rtw_sdio *)rtwdev->priv;
return rtwsdio->sdio3_bus_mode;
}
#endif