160 lines
4.9 KiB
YAML
160 lines
4.9 KiB
YAML
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ST-Ericsson DMA40 DMA Engine
|
|
|
|
maintainers:
|
|
- Linus Walleij <linus.walleij@linaro.org>
|
|
|
|
allOf:
|
|
- $ref: dma-controller.yaml#
|
|
|
|
properties:
|
|
"#dma-cells":
|
|
const: 3
|
|
description: |
|
|
The first cell is the unique device channel number as indicated by this
|
|
table for DB8500 which is the only ASIC known to use DMA40:
|
|
|
|
0: SPI controller 0
|
|
1: SD/MMC controller 0 (unused)
|
|
2: SD/MMC controller 1 (unused)
|
|
3: SD/MMC controller 2 (unused)
|
|
4: I2C port 1
|
|
5: I2C port 3
|
|
6: I2C port 2
|
|
7: I2C port 4
|
|
8: Synchronous Serial Port SSP0
|
|
9: Synchronous Serial Port SSP1
|
|
10: Multi-Channel Display Engine MCDE RX
|
|
11: UART port 2
|
|
12: UART port 1
|
|
13: UART port 0
|
|
14: Multirate Serial Port MSP2
|
|
15: I2C port 0
|
|
16: USB OTG in/out endpoints 7 & 15
|
|
17: USB OTG in/out endpoints 6 & 14
|
|
18: USB OTG in/out endpoints 5 & 13
|
|
19: USB OTG in/out endpoints 4 & 12
|
|
20: SLIMbus or HSI channel 0
|
|
21: SLIMbus or HSI channel 1
|
|
22: SLIMbus or HSI channel 2
|
|
23: SLIMbus or HSI channel 3
|
|
24: Multimedia DSP SXA0
|
|
25: Multimedia DSP SXA1
|
|
26: Multimedia DSP SXA2
|
|
27: Multimedia DSP SXA3
|
|
28: SD/MMC controller 2
|
|
29: SD/MMC controller 0
|
|
30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2
|
|
31: MSP port 0 or SLIMbus channel 0
|
|
32: SD/MMC controller 1
|
|
33: SPI controller 2
|
|
34: i2c3 RX2 TX2
|
|
35: SPI controller 1
|
|
36: USB OTG in/out endpoints 3 & 11
|
|
37: USB OTG in/out endpoints 2 & 10
|
|
38: USB OTG in/out endpoints 1 & 9
|
|
39: USB OTG in/out endpoints 8
|
|
40: SPI controller 3
|
|
41: SD/MMC controller 3
|
|
42: SD/MMC controller 4
|
|
43: SD/MMC controller 5
|
|
44: Multimedia DSP SXA4
|
|
45: Multimedia DSP SXA5
|
|
46: SLIMbus channel 8 or Multimedia DSP SXA6
|
|
47: SLIMbus channel 9 or Multimedia DSP SXA7
|
|
48: Crypto Accelerator 1
|
|
49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX
|
|
50: Hash Accelerator 1 TX
|
|
51: memcpy TX (to be used by the DMA driver for memcpy operations)
|
|
52: SLIMbus or HSI channel 4
|
|
53: SLIMbus or HSI channel 5
|
|
54: SLIMbus or HSI channel 6
|
|
55: SLIMbus or HSI channel 7
|
|
56: memcpy (to be used by the DMA driver for memcpy operations)
|
|
57: memcpy (to be used by the DMA driver for memcpy operations)
|
|
58: memcpy (to be used by the DMA driver for memcpy operations)
|
|
59: memcpy (to be used by the DMA driver for memcpy operations)
|
|
60: memcpy (to be used by the DMA driver for memcpy operations)
|
|
61: Crypto Accelerator 0
|
|
62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX
|
|
63: Hash Accelerator 0 TX
|
|
|
|
The second cell is the DMA request line number. This is only used when
|
|
a fixed channel is allocated, and indicated by setting bit 3 in the
|
|
flags field (see below).
|
|
|
|
The third cell is a 32bit flags bitfield with the following possible
|
|
bits set:
|
|
0x00000001 (bit 0) - mode:
|
|
Logical channel when unset
|
|
Physical channel when set
|
|
0x00000002 (bit 1) - direction:
|
|
Memory to Device when unset
|
|
Device to Memory when set
|
|
0x00000004 (bit 2) - endianness:
|
|
Little endian when unset
|
|
Big endian when set
|
|
0x00000008 (bit 3) - use fixed channel:
|
|
Use automatic channel selection when unset
|
|
Use DMA request line number when set
|
|
0x00000010 (bit 4) - set channel as high priority:
|
|
Normal priority when unset
|
|
High priority when set
|
|
|
|
compatible:
|
|
items:
|
|
- const: stericsson,db8500-dma40
|
|
- const: stericsson,dma40
|
|
|
|
reg:
|
|
items:
|
|
- description: DMA40 memory base
|
|
- description: LCPA memory base
|
|
|
|
reg-names:
|
|
items:
|
|
- const: base
|
|
- const: lcpa
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
clocks:
|
|
maxItems: 1
|
|
|
|
memcpy-channels:
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
|
description: Array of u32 elements indicating which channels on the DMA
|
|
engine are elegible for memcpy transfers
|
|
|
|
required:
|
|
- "#dma-cells"
|
|
- compatible
|
|
- reg
|
|
- interrupts
|
|
- clocks
|
|
- memcpy-channels
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/mfd/dbx500-prcmu.h>
|
|
dma-controller@801c0000 {
|
|
compatible = "stericsson,db8500-dma40", "stericsson,dma40";
|
|
reg = <0x801c0000 0x1000>, <0x40010000 0x800>;
|
|
reg-names = "base", "lcpa";
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
#dma-cells = <3>;
|
|
memcpy-channels = <56 57 58 59 60>;
|
|
clocks = <&prcmu_clk PRCMU_DMACLK>;
|
|
};
|
|
...
|