303 lines
7.8 KiB
C
303 lines
7.8 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
||
|
/*
|
||
|
* Copyright (C) 2017 Free Electrons
|
||
|
* Copyright (C) 2017 NextThing Co
|
||
|
*
|
||
|
* Author: Boris Brezillon <boris.brezillon@free-electrons.com>
|
||
|
*/
|
||
|
|
||
|
#include "internals.h"
|
||
|
|
||
|
/* Bit for detecting BENAND */
|
||
|
#define TOSHIBA_NAND_ID4_IS_BENAND BIT(7)
|
||
|
|
||
|
/* Recommended to rewrite for BENAND */
|
||
|
#define TOSHIBA_NAND_STATUS_REWRITE_RECOMMENDED BIT(3)
|
||
|
|
||
|
/* ECC Status Read Command for BENAND */
|
||
|
#define TOSHIBA_NAND_CMD_ECC_STATUS_READ 0x7A
|
||
|
|
||
|
/* ECC Status Mask for BENAND */
|
||
|
#define TOSHIBA_NAND_ECC_STATUS_MASK 0x0F
|
||
|
|
||
|
/* Uncorrectable Error for BENAND */
|
||
|
#define TOSHIBA_NAND_ECC_STATUS_UNCORR 0x0F
|
||
|
|
||
|
/* Max ECC Steps for BENAND */
|
||
|
#define TOSHIBA_NAND_MAX_ECC_STEPS 8
|
||
|
|
||
|
static int toshiba_nand_benand_read_eccstatus_op(struct nand_chip *chip,
|
||
|
u8 *buf)
|
||
|
{
|
||
|
u8 *ecc_status = buf;
|
||
|
|
||
|
if (nand_has_exec_op(chip)) {
|
||
|
const struct nand_sdr_timings *sdr =
|
||
|
nand_get_sdr_timings(nand_get_interface_config(chip));
|
||
|
struct nand_op_instr instrs[] = {
|
||
|
NAND_OP_CMD(TOSHIBA_NAND_CMD_ECC_STATUS_READ,
|
||
|
PSEC_TO_NSEC(sdr->tADL_min)),
|
||
|
NAND_OP_8BIT_DATA_IN(chip->ecc.steps, ecc_status, 0),
|
||
|
};
|
||
|
struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs);
|
||
|
|
||
|
return nand_exec_op(chip, &op);
|
||
|
}
|
||
|
|
||
|
return -ENOTSUPP;
|
||
|
}
|
||
|
|
||
|
static int toshiba_nand_benand_eccstatus(struct nand_chip *chip)
|
||
|
{
|
||
|
struct mtd_info *mtd = nand_to_mtd(chip);
|
||
|
int ret;
|
||
|
unsigned int max_bitflips = 0;
|
||
|
u8 status, ecc_status[TOSHIBA_NAND_MAX_ECC_STEPS];
|
||
|
|
||
|
/* Check Status */
|
||
|
ret = toshiba_nand_benand_read_eccstatus_op(chip, ecc_status);
|
||
|
if (!ret) {
|
||
|
unsigned int i, bitflips = 0;
|
||
|
|
||
|
for (i = 0; i < chip->ecc.steps; i++) {
|
||
|
bitflips = ecc_status[i] & TOSHIBA_NAND_ECC_STATUS_MASK;
|
||
|
if (bitflips == TOSHIBA_NAND_ECC_STATUS_UNCORR) {
|
||
|
mtd->ecc_stats.failed++;
|
||
|
} else {
|
||
|
mtd->ecc_stats.corrected += bitflips;
|
||
|
max_bitflips = max(max_bitflips, bitflips);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return max_bitflips;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Fallback to regular status check if
|
||
|
* toshiba_nand_benand_read_eccstatus_op() failed.
|
||
|
*/
|
||
|
ret = nand_status_op(chip, &status);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
if (status & NAND_STATUS_FAIL) {
|
||
|
/* uncorrected */
|
||
|
mtd->ecc_stats.failed++;
|
||
|
} else if (status & TOSHIBA_NAND_STATUS_REWRITE_RECOMMENDED) {
|
||
|
/* corrected */
|
||
|
max_bitflips = mtd->bitflip_threshold;
|
||
|
mtd->ecc_stats.corrected += max_bitflips;
|
||
|
}
|
||
|
|
||
|
return max_bitflips;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
toshiba_nand_read_page_benand(struct nand_chip *chip, uint8_t *buf,
|
||
|
int oob_required, int page)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = nand_read_page_raw(chip, buf, oob_required, page);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return toshiba_nand_benand_eccstatus(chip);
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
toshiba_nand_read_subpage_benand(struct nand_chip *chip, uint32_t data_offs,
|
||
|
uint32_t readlen, uint8_t *bufpoi, int page)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
ret = nand_read_page_op(chip, page, data_offs,
|
||
|
bufpoi + data_offs, readlen);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
|
||
|
return toshiba_nand_benand_eccstatus(chip);
|
||
|
}
|
||
|
|
||
|
static void toshiba_nand_benand_init(struct nand_chip *chip)
|
||
|
{
|
||
|
struct mtd_info *mtd = nand_to_mtd(chip);
|
||
|
|
||
|
/*
|
||
|
* On BENAND, the entire OOB region can be used by the MTD user.
|
||
|
* The calculated ECC bytes are stored into other isolated
|
||
|
* area which is not accessible to users.
|
||
|
* This is why chip->ecc.bytes = 0.
|
||
|
*/
|
||
|
chip->ecc.bytes = 0;
|
||
|
chip->ecc.size = 512;
|
||
|
chip->ecc.strength = 8;
|
||
|
chip->ecc.read_page = toshiba_nand_read_page_benand;
|
||
|
chip->ecc.read_subpage = toshiba_nand_read_subpage_benand;
|
||
|
chip->ecc.write_page = nand_write_page_raw;
|
||
|
chip->ecc.read_page_raw = nand_read_page_raw_notsupp;
|
||
|
chip->ecc.write_page_raw = nand_write_page_raw_notsupp;
|
||
|
|
||
|
chip->options |= NAND_SUBPAGE_READ;
|
||
|
|
||
|
mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
|
||
|
}
|
||
|
|
||
|
static void toshiba_nand_decode_id(struct nand_chip *chip)
|
||
|
{
|
||
|
struct nand_device *base = &chip->base;
|
||
|
struct nand_ecc_props requirements = {};
|
||
|
struct mtd_info *mtd = nand_to_mtd(chip);
|
||
|
struct nand_memory_organization *memorg;
|
||
|
|
||
|
memorg = nanddev_get_memorg(&chip->base);
|
||
|
|
||
|
nand_decode_ext_id(chip);
|
||
|
|
||
|
/*
|
||
|
* Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
|
||
|
* 512B page. For Toshiba SLC, we decode the 5th/6th byte as
|
||
|
* follows:
|
||
|
* - ID byte 6, bits[2:0]: 100b -> 43nm, 101b -> 32nm,
|
||
|
* 110b -> 24nm
|
||
|
* - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC
|
||
|
*/
|
||
|
if (chip->id.len >= 6 && nand_is_slc(chip) &&
|
||
|
(chip->id.data[5] & 0x7) == 0x6 /* 24nm */ &&
|
||
|
!(chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND) /* !BENAND */) {
|
||
|
memorg->oobsize = 32 * memorg->pagesize >> 9;
|
||
|
mtd->oobsize = memorg->oobsize;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Extract ECC requirements from 6th id byte.
|
||
|
* For Toshiba SLC, ecc requrements are as follows:
|
||
|
* - 43nm: 1 bit ECC for each 512Byte is required.
|
||
|
* - 32nm: 4 bit ECC for each 512Byte is required.
|
||
|
* - 24nm: 8 bit ECC for each 512Byte is required.
|
||
|
*/
|
||
|
if (chip->id.len >= 6 && nand_is_slc(chip)) {
|
||
|
requirements.step_size = 512;
|
||
|
switch (chip->id.data[5] & 0x7) {
|
||
|
case 0x4:
|
||
|
requirements.strength = 1;
|
||
|
break;
|
||
|
case 0x5:
|
||
|
requirements.strength = 4;
|
||
|
break;
|
||
|
case 0x6:
|
||
|
requirements.strength = 8;
|
||
|
break;
|
||
|
default:
|
||
|
WARN(1, "Could not get ECC info");
|
||
|
requirements.step_size = 0;
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
nanddev_set_ecc_requirements(base, &requirements);
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
tc58teg5dclta00_choose_interface_config(struct nand_chip *chip,
|
||
|
struct nand_interface_config *iface)
|
||
|
{
|
||
|
onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 5);
|
||
|
|
||
|
return nand_choose_best_sdr_timings(chip, iface, NULL);
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
tc58nvg0s3e_choose_interface_config(struct nand_chip *chip,
|
||
|
struct nand_interface_config *iface)
|
||
|
{
|
||
|
onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 2);
|
||
|
|
||
|
return nand_choose_best_sdr_timings(chip, iface, NULL);
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
th58nvg2s3hbai4_choose_interface_config(struct nand_chip *chip,
|
||
|
struct nand_interface_config *iface)
|
||
|
{
|
||
|
struct nand_sdr_timings *sdr = &iface->timings.sdr;
|
||
|
|
||
|
/* Start with timings from the closest timing mode, mode 4. */
|
||
|
onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4);
|
||
|
|
||
|
/* Patch timings that differ from mode 4. */
|
||
|
sdr->tALS_min = 12000;
|
||
|
sdr->tCHZ_max = 20000;
|
||
|
sdr->tCLS_min = 12000;
|
||
|
sdr->tCOH_min = 0;
|
||
|
sdr->tDS_min = 12000;
|
||
|
sdr->tRHOH_min = 25000;
|
||
|
sdr->tRHW_min = 30000;
|
||
|
sdr->tRHZ_max = 60000;
|
||
|
sdr->tWHR_min = 60000;
|
||
|
|
||
|
/* Patch timings not part of onfi timing mode. */
|
||
|
sdr->tPROG_max = 700000000;
|
||
|
sdr->tBERS_max = 5000000000;
|
||
|
|
||
|
return nand_choose_best_sdr_timings(chip, iface, sdr);
|
||
|
}
|
||
|
|
||
|
static int tc58teg5dclta00_init(struct nand_chip *chip)
|
||
|
{
|
||
|
struct mtd_info *mtd = nand_to_mtd(chip);
|
||
|
|
||
|
chip->ops.choose_interface_config =
|
||
|
&tc58teg5dclta00_choose_interface_config;
|
||
|
chip->options |= NAND_NEED_SCRAMBLING;
|
||
|
mtd_set_pairing_scheme(mtd, &dist3_pairing_scheme);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int tc58nvg0s3e_init(struct nand_chip *chip)
|
||
|
{
|
||
|
chip->ops.choose_interface_config =
|
||
|
&tc58nvg0s3e_choose_interface_config;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int th58nvg2s3hbai4_init(struct nand_chip *chip)
|
||
|
{
|
||
|
chip->ops.choose_interface_config =
|
||
|
&th58nvg2s3hbai4_choose_interface_config;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int toshiba_nand_init(struct nand_chip *chip)
|
||
|
{
|
||
|
if (nand_is_slc(chip))
|
||
|
chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
|
||
|
|
||
|
/* Check that chip is BENAND and ECC mode is on-die */
|
||
|
if (nand_is_slc(chip) &&
|
||
|
chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE &&
|
||
|
chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND)
|
||
|
toshiba_nand_benand_init(chip);
|
||
|
|
||
|
if (!strcmp("TC58TEG5DCLTA00", chip->parameters.model))
|
||
|
tc58teg5dclta00_init(chip);
|
||
|
if (!strncmp("TC58NVG0S3E", chip->parameters.model,
|
||
|
sizeof("TC58NVG0S3E") - 1))
|
||
|
tc58nvg0s3e_init(chip);
|
||
|
if ((!strncmp("TH58NVG2S3HBAI4", chip->parameters.model,
|
||
|
sizeof("TH58NVG2S3HBAI4") - 1)) ||
|
||
|
(!strncmp("TH58NVG3S0HBAI4", chip->parameters.model,
|
||
|
sizeof("TH58NVG3S0HBAI4") - 1)))
|
||
|
th58nvg2s3hbai4_init(chip);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
const struct nand_manufacturer_ops toshiba_nand_manuf_ops = {
|
||
|
.detect = toshiba_nand_decode_id,
|
||
|
.init = toshiba_nand_init,
|
||
|
};
|