186 lines
4.7 KiB
YAML
186 lines
4.7 KiB
YAML
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||
|
|
%YAML 1.2
|
||
|
|
---
|
||
|
|
$id: http://devicetree.org/schemas/sound/rockchip,i2s-tdm.yaml#
|
||
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||
|
|
|
||
|
|
title: Rockchip I2S/TDM Controller
|
||
|
|
|
||
|
|
description:
|
||
|
|
The Rockchip I2S/TDM Controller is a Time Division Multiplexed
|
||
|
|
audio interface found in various Rockchip SoCs, allowing up
|
||
|
|
to 8 channels of audio over a serial interface.
|
||
|
|
|
||
|
|
maintainers:
|
||
|
|
- Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
|
||
|
|
|
||
|
|
allOf:
|
||
|
|
- $ref: dai-common.yaml#
|
||
|
|
|
||
|
|
properties:
|
||
|
|
compatible:
|
||
|
|
enum:
|
||
|
|
- rockchip,px30-i2s-tdm
|
||
|
|
- rockchip,rk1808-i2s-tdm
|
||
|
|
- rockchip,rk3308-i2s-tdm
|
||
|
|
- rockchip,rk3568-i2s-tdm
|
||
|
|
- rockchip,rk3588-i2s-tdm
|
||
|
|
- rockchip,rv1126-i2s-tdm
|
||
|
|
|
||
|
|
reg:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
interrupts:
|
||
|
|
maxItems: 1
|
||
|
|
|
||
|
|
dmas:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 2
|
||
|
|
|
||
|
|
dma-names:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 2
|
||
|
|
items:
|
||
|
|
enum:
|
||
|
|
- rx
|
||
|
|
- tx
|
||
|
|
|
||
|
|
clocks:
|
||
|
|
minItems: 3
|
||
|
|
items:
|
||
|
|
- description: clock for TX
|
||
|
|
- description: clock for RX
|
||
|
|
- description: AHB clock driving the interface
|
||
|
|
- description:
|
||
|
|
Parent clock for mclk_tx (only required when using mclk-calibrate)
|
||
|
|
- description:
|
||
|
|
Parent clock for mclk_rx (only required when using mclk-calibrate)
|
||
|
|
- description:
|
||
|
|
Clock for sample rates that are an integer multiple of 8000
|
||
|
|
(only required when using mclk-calibrate)
|
||
|
|
- description:
|
||
|
|
Clock for sample rates that are an integer multiple of 11025
|
||
|
|
(only required when using mclk-calibrate)
|
||
|
|
|
||
|
|
clock-names:
|
||
|
|
minItems: 3
|
||
|
|
items:
|
||
|
|
- const: mclk_tx
|
||
|
|
- const: mclk_rx
|
||
|
|
- const: hclk
|
||
|
|
- const: mclk_tx_src
|
||
|
|
- const: mclk_rx_src
|
||
|
|
- const: mclk_root0
|
||
|
|
- const: mclk_root1
|
||
|
|
|
||
|
|
resets:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 2
|
||
|
|
description: resets for the tx and rx directions
|
||
|
|
|
||
|
|
reset-names:
|
||
|
|
minItems: 1
|
||
|
|
maxItems: 2
|
||
|
|
items:
|
||
|
|
enum:
|
||
|
|
- tx-m
|
||
|
|
- rx-m
|
||
|
|
|
||
|
|
rockchip,grf:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
||
|
|
description:
|
||
|
|
The phandle of the syscon node for the GRF register.
|
||
|
|
|
||
|
|
rockchip,trcm-sync-tx-only:
|
||
|
|
type: boolean
|
||
|
|
description: Use TX BCLK/LRCK for both TX and RX.
|
||
|
|
|
||
|
|
rockchip,trcm-sync-rx-only:
|
||
|
|
type: boolean
|
||
|
|
description: Use RX BCLK/LRCK for both TX and RX.
|
||
|
|
|
||
|
|
"#sound-dai-cells":
|
||
|
|
const: 0
|
||
|
|
|
||
|
|
rockchip,i2s-rx-route:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
description:
|
||
|
|
Defines the mapping of I2S RX sdis to I2S data bus lines.
|
||
|
|
By default, they are mapped one-to-one.
|
||
|
|
rockchip,i2s-rx-route = <3> would mean sdi3 is receiving from data0.
|
||
|
|
maxItems: 4
|
||
|
|
items:
|
||
|
|
enum: [0, 1, 2, 3]
|
||
|
|
|
||
|
|
rockchip,i2s-tx-route:
|
||
|
|
$ref: /schemas/types.yaml#/definitions/uint32-array
|
||
|
|
description:
|
||
|
|
Defines the mapping of I2S TX sdos to I2S data bus lines.
|
||
|
|
By default, they are mapped one-to-one.
|
||
|
|
rockchip,i2s-tx-route = <3> would mean sdo3 is sending to data0.
|
||
|
|
maxItems: 4
|
||
|
|
items:
|
||
|
|
enum: [0, 1, 2, 3]
|
||
|
|
|
||
|
|
rockchip,io-multiplex:
|
||
|
|
description:
|
||
|
|
Specify that the GPIO lines on the I2S bus are multiplexed such that
|
||
|
|
the direction (input/output) needs to be dynamically adjusted.
|
||
|
|
type: boolean
|
||
|
|
|
||
|
|
|
||
|
|
required:
|
||
|
|
- compatible
|
||
|
|
- reg
|
||
|
|
- interrupts
|
||
|
|
- dmas
|
||
|
|
- dma-names
|
||
|
|
- clocks
|
||
|
|
- clock-names
|
||
|
|
- resets
|
||
|
|
- reset-names
|
||
|
|
- "#sound-dai-cells"
|
||
|
|
|
||
|
|
unevaluatedProperties: false
|
||
|
|
|
||
|
|
examples:
|
||
|
|
- |
|
||
|
|
#include <dt-bindings/clock/rk3568-cru.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
||
|
|
|
||
|
|
bus {
|
||
|
|
#address-cells = <2>;
|
||
|
|
#size-cells = <2>;
|
||
|
|
i2s@fe410000 {
|
||
|
|
compatible = "rockchip,rk3568-i2s-tdm";
|
||
|
|
reg = <0x0 0xfe410000 0x0 0x1000>;
|
||
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
clocks = <&cru MCLK_I2S1_8CH_TX>, <&cru MCLK_I2S1_8CH_RX>,
|
||
|
|
<&cru HCLK_I2S1_8CH>;
|
||
|
|
clock-names = "mclk_tx", "mclk_rx", "hclk";
|
||
|
|
dmas = <&dmac1 3>, <&dmac1 2>;
|
||
|
|
dma-names = "rx", "tx";
|
||
|
|
resets = <&cru SRST_M_I2S1_8CH_TX>, <&cru SRST_M_I2S1_8CH_RX>;
|
||
|
|
reset-names = "tx-m", "rx-m";
|
||
|
|
rockchip,trcm-sync-tx-only;
|
||
|
|
rockchip,grf = <&grf>;
|
||
|
|
#sound-dai-cells = <0>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 =
|
||
|
|
<&i2s1m0_sclktx
|
||
|
|
&i2s1m0_sclkrx
|
||
|
|
&i2s1m0_lrcktx
|
||
|
|
&i2s1m0_lrckrx
|
||
|
|
&i2s1m0_sdi0
|
||
|
|
&i2s1m0_sdi1
|
||
|
|
&i2s1m0_sdi2
|
||
|
|
&i2s1m0_sdi3
|
||
|
|
&i2s1m0_sdo0
|
||
|
|
&i2s1m0_sdo1
|
||
|
|
&i2s1m0_sdo2
|
||
|
|
&i2s1m0_sdo3>;
|
||
|
|
};
|
||
|
|
};
|